What is the right way to use these paints on an xbox controller? My son keeps trying and even with clear coat it rubs off and fades from holding/sweat

You need to scuff the surface with a scotchbrite pad, remove all the grease with a tac rag, then apply createx base coat sealer - white or black. leave 24 hours, come back, and clear coat it. wait 24 hours, come back, scuff it with the pad again and remove all the dust etc, paint your design, clear coat it 3-4 coats, leave 24 hours. voila!

Can this paint be used on fabric? Also, is water used to thin it?

Createx Airbrush Colors are the number one, most widely used and trusted professional airbrush paint in the world. Made with light-fast pigments, durable resins and quality ingredients, Createx works on fabric, wood, leather, canvass, plastics, aluminum, metals, ceramic, clay, poster board, brick, plaster, latex, glass and more. Colors are water-based, non-toxic and meet ASTM D-4236 standards. Createx Airbrush Colors are designed for permanent results with a soft-hand feel on fabrics. Colors cure with the assistance of heat after drying. The use of heat to cure colors is one of the main differences between Createx Airbrush Colors and Wicked & Auto Air Colors which cure to a much stronger film with air drying alone (referred to as self-cross linking). Createx are made with exterior-grade (automotive) pigments allowing them to withstand prolonged exposure to direct, outdoor light without fading. For maximum permanence, a top-coat should be applied over the paint after curing. Set contains 2 oz bottles in 6 colors: Opaque White, Opaque Black, Opaque Yellow, Opaque Light Green, Opaque Red, Opaque Blue. Colors subject to change.Item PropertiesCategory: PaintBrand: CreatexColor: MultiFormat: BottleSize: 2 ozType: Airbrush

Is this good for auto graphics if I clear coat

You can use the autoair createx colors they have pearls , candy-o and primary colors And fluorescent for auto graphics, I use on mountain bikes and motorcycle make sure to buy all the mixers so that you get a good finish

Anybody know if this paint is safe on foam?If not can anyone recommend airbrush or rattle can paint that's foam safe on depron,epp,epo,blucore?

I have used this paint on many different surfaces but never on foam , I think that it would work fine on foam .......the paint isn't that expensive so I would give it a try .

Product Dimensions	10.16 x 10.16 x 7.11 cm; 498.95 g
Item Weight	499 g
Specific uses	Interior
Item volume	2 Fluid Ounces
Fabric Type	Nullify
Finish types	Matte
Care instructions	Use in a well-ventilated area. Avoid eye contact. After use, wash hands thoroughly with soap and warm water. Do not ingest. When spraying or grinding, use a suitable NIOSH approved respirator according to the manufacturer's instructions. Eye contact: rinse with clean water for 15 minutes. See a doctor. Inhalation: Use in well-ventilated areas and wear a NIOSH approved respirator.
Is assembly required	No
Number of pieces	6
Batteries required	No
Included components	Airbrush Paints
Import designation	Made in US

Createx AIRBRUSH KIT/6 OPAQUE

Details

Description

Specifications

Have a Question? See What Others Asked

Common Questions