Minwax Helmsman Spar Urethane Aerosol Spray, 11.5 ounce, Satin (Packaging May Vary)

I have an east facing door that gets beat on by the sun for couple of hours every day. The original finish cooked right off and started splitting the wood. I sanded the door back down to raw wood, filled in the splits, re-stained with a Minwax stain, then followed up with 3 coats of Helmsman Spar Urethane. It was tedious to do at first because it was a lot of work to get the door back to raw wood and you have to wait 4 hours and sand in between coats. Now that it's done, it's never worn through the 3 coats. Annually I use a red scotch bright sanding pad and lightly re-sand, add a coat, wait 4 hours and re-sand, then another coat. It's much faster now that I'm just adding coats and using a scotch bright sanding pad to refinish the urethane. Less than 30 min to sand and re-coat each layer. Use a good quality brush like a Purdy. I used a cheaper brush in the past and it left brush strokes in the finish. Clean with mineral spirits. I liked it so much I ended up doing the same finish on my east/west facing wood gate that gets sun all day long and it holds up great.

Product is as advertised and worked great! I highly recommend! Water based easy to rinse brushes off

Went on easy, looks good. Wouldn't expect anything less from Minwax.

Great Product

I used this for outdoor "yard art", specifically a few metal signs and then several wood signs our family painted. This sprays in a nice, uniform spray and covered very well. Of course part of that is technic so it doesn't pool and run. Still, gives a nice looks with protection. I've used this before and it will, over time and especially in the sun start to peel a bit, but I think it works well for my projects.

This product I used to paint my house from door and kitchen cabinets, the quality of this product is very good, it dries quickly, is shiny, easy to use, and the price is reasonable. I like it.

I wouldn’t use any other product. Perfect quality.

This product is designed for treating wood for outdoors. It does this well and appears to protect both bare and painted surfaces from sunlight (UV) and rain. It does not get hot or cold where I live, but it is sunny and rains too.It is important to protect wood from rain, this can do that. Rain can become problematic when it gets into the end-grain of wood. This product is essentially clear plastic (albeit very thin) and can protect wood. It is VERY good on interesting wood that you want to retain it's look. Many woods will turn grey over time. I'd suggest testing before committing.A BIG win here is that this product is water based, it will dry quickly with no smell and clean up with water. You can apply with a foam brush. Two or three coats is usually sufficient.