W&P Peak Silicone Ice Mold Tray w/Protective Lid | Charcoal | Easy to Remove Ice Cubes | Food Grade Premium Silicone | Dishwasher Safe, BPA Free One Size

It works perfectly! Got the clear ice cube made! Hubby is happy!

This product delivers clear ice as promised, but I have found a couple tips that work for me in addition to the instruction provided. 1. Get the air out. If you fully assembly it and fill with water, air will get trapped under the ice cube mold and tapping it gently on the counter will free the trapped air. However, I have started to fill the larger mold about 3/4 full and then slowly inserting the top cube mold which fully pushes all the air out and they I just top off the remaining water. 2. Don’t allow the bottom section to fully freeze, this makes removing the ice much easier. The ice freezes from the top down, so the clear cube at the top will be fully frozen before the bottom and then the bottom tends to freeze around the outside with the middle freezing last. For me, after about 16 hours, the top cube is fully frozen and the outside of the bottom section is not fully frozen but solid enough to grab and separate from the top mold. Experiment with the time to see what works best for your freezer. 3. Store the cubes in a freezer bag so you have enough on hand for your needs. I did fail to make a clear cube on my first attempt since I was impatient and tried removing it from the mold before realizing the top cube wasn’t fully frozen, so user error and I learned I needed more time in the freezer and began setting a timer. I am now consistently making clear ice and have made over 10 perfectly clear cubes.

Finally! This mold actually makes clear ice. Anything that doesn't talk about directional freezing is fake. This is the real deal, and it freezes in half a day!

Love the size and ease of use... Id buy more but it would fill up my freezer... I just produce a cube a day till I have enough on hand for drinks.. Cubes are clear!.. Use water that has been sitting for a few hours.. I put mine into a few water bottles from the refer water dispenser and let it sit till ready to use.. Also. Helps w air bubbles

First off, read the instructions and understand that it will take nearly a full 12 hours to set up the ice cube. Took me a week to make enough ice for a party! Besides the lengthy set up time, this does produce the results you are looking for! Removing the ice from the silicone sleeve can be a bit tricky. I’m hesitant to bend the silicone too much for fear of breaking the mold. A splash of hot water seems to do the trick at getting things moving. One nice bonus is the “secondary” cube that forms at the bottom of the mold. While this one isn’t crystal clear, it does give you a large cube that works just fine. For the price this is a great add for the home bartender.