JET Vortex Cone Dust Collector, 2-Micron Canister Filter, 1-1/2 HP, 115/230V 1Ph (Model DC-1100VX-CK)

I ordered this for my son for Christmas to add to his workshop to help manage dust being created from his planer, jointer and table-saw. He had been using a shopvac but that was not very efficient to manage the amount of dust his planer was making. We put the unit together the other day and I would highly recommend two people doing it as there are a couple of steps in the assembly process that would be very challenging to do by yourself. Overall it goes together very easily, took us about 1 hour and the instructions were very clear. Once we had it together we plug it in and turned it on and wow what a difference compared to the shop vac. Very good suction and the unit is actually much quieter than I expected, more of a humming type sound vs. the high pitch sound of the shop vac. The two inlets are nice as well. This unit is very heavy duty, the filter works great and the storage bags (4 included) are very thick so I think you will be able to reuse them if you wanted to. Jet really makes a great product here. So if your an avid woodworking looking for a reasonably priced dust collection system I highly recommend this one.If you found this review helpful please let me know by pressing the helpful button below. I do my best to write honest and helpful reviews of products I actually purchase and use. Your feedback helps me to understand how good of a job I am doing. Thanks.

I have had this since yesterday when I wrote this review. That being said it arrived with damaged boxes which I saw in other reviews, but the parts themselves were just fine. As far as putting it together goes, I did it by myself. All in all it took about 30 minutes after unpacking everything. I read in other reviews about paint in the threaded holes on the base. I had that issue as well. I was able to start the threads by hand easily and just ran them in the rest of the way with a cordless impact gun. As far as the directions go for assembly, I wouldn't know. I didn't open up the manual. It's pretty self explanatory where things go if you lay out the parts that are similar. I put the wheels on the base and kept the extra nuts and lock washers for my bolt bin. Next I mounted the blower/motor assembly with 4 bolts and washers. Then I loosely mounted the 3 legs for the filter and bag assembly loosely so I could reposition them if necessary. Then mounted the base for the filter on the legs with 2 bolts per leg and a washer on the inside and outside. Looking back I would have mounted the filter assembly to the legs first so as not to have to balance things around while putting bolts in. The whole thing weighs maybe 15-20 pounds and stands about 3 feet tall so order of assembly is more of your presence than anything. I tightened all the bolts up that were installed thus far(which are all the same size which made it nice) and proceeded to bolt up the flat black bar to the top side of the inner filter assembly. Then bolted up the cone wider side down. Next came the bar for the flaps to clean the upper filter. I put a nut on the bolt coming out from the top followed by a washer, then the handle( pointing down) then washer and nut. I used 2 3/4" wrenches and tightened the nuts together. I then set the filter up on the top of the unit and put in the 4 thumbscrews to keep it there. Lastly, I took the ring for the plastic bags which is the white fabric covered ring and fed a bag through the center and flapped the excess to the outside. Finally, I put on the hose to connect the motor and filter assemblies. I sprayed a little bit of glass cleaner on the fittings so they would slide on easily and tightened it up then tried it out and it works great. The only thing I will be doing is adding a dust deputy to the vacuum line before it reaches the impeller to catch bigger things that will clog up the fingers on the intake that are there to keep big things out. The y assembly pops on and off without any tools so clean out isn't difficult but I don't want to have to mess with it. I took a picture of the fingers so you can see what I'm talking about. If chips can't pass it will significantly decrease your suction.

Like others have stated the packaging is sub par. The filter box was split open and exposed, one surface scratch no structural damage, luckily the pallet looked to be taken care of in transit. If you end up having your item shipped via CEVA I feel for you. What a terrible experience dealing with them. I understand shipping delays, it happens. What I don't understand is the lack of customer service, the rude agents, and lack of communication given throughout the process. Item was supposed to arrive July 14th. No tracking information was provided between July 12th and July 20th when it finally arrived. It was just flat out missing. Then a separate third party shipping agent ended up actually delivering the item, albeit 8 days later. Incredibly frustrating experience.Product wise, it is a solidly built piece of JET equipment. The dust collector has serious power and will be well utilized. Meets the expectation I had.