60cm/2ft 2pcs MHF4 IPEX WLAN Network Adapter PC Antenna for NGFF Intel 7260 8260 8265 9265 9260 9560 AX210 AX200NGW AX Killer M.2 IPEX4 Module Card

I had mistakenly purchased an MHF1 IPEX antenna meant for a mini PCI-E Wifi card before coming across this one. So please take note that if you are replacing your antennas that these are MHF4 IPEX which is meant for the m.2 Wifi with an A or E key slot in them. These connectors are much smaller than the MHF1's which are already small themselves.These antennae seem to work great. I thought the length of them was fine in my HP Pavilion 15z-cw100. Granted the antenna that went to the top left of the lid had to have the wire go directly behind the LCD display to reach the spot it needed to go but it doesn't seem to interfere having it like that in anyway.I had upgraded my wifi card to an AX210NGW as well and got this pair to go with it since it has space for a Main and AUX antenna which my original wifi card did not have. Signal comes in nice and strong. Download speeds are optimal at around 500-550mbps which is perfect since 500mbps is what I'm paying for.Overall, if you're in need of a new pair of antennae for an m.2 style wifi card, then you can't go wrong with these.

These antennas worked perfect for my setup, used it on HP sff G5, when i added a onboard wifi card, so far so good and i like the fact that it has 3m adhesive tap to hold in space.

I know I should have probably given myself some more slack. These cables were a tight fit because they were a bit too short but tbh that's on me. Other than that they provide a good signal but the adhesion on the cables could have been better.

*I've left my original 1 star review below*Today I surprisingly received a replacement cable. I had taken my loss on the original cable and ordered something different from elsewhere. The seller without communication from me sent me a replacement, most likely to my poor review below. The replacement cable worked great. The cable snapped in to the wifi card on my first try. The signal on my GS65 is great now.I'm glad to see the seller takes reviews serious and that I may have just been unfortunate the first time around with a cable with some QA issue. These connectors are tiny, very little room for error. If you get a cable without any QA problems, rest assured it works great signal wise.I agree with the other reviewer, the connectors are of poor quality. I couldn't get the antenna to connect to the wifi card. I was replacing one antenna only. The OEM antenna connected easily to the card and this replacement antenna would just refuse to connect. Ended up bending the connection on my wifi card.

I did some upgrading on an EVOO LP5 and upon reassembly, I got a bit too aggressive and damaged the original antenna connectors.I replaced the originals with this set successfully. They were a little long for this application, but I was able to loop and tuck the excess aside.The signal seems like it's even better than it was before. The installation went smoothly. I would recommend this set of antenna cables. Well made. No problems.

Have a Gateway GWN141-4. The antenna wire broke off at the tiny MHF4 connector. So tiny, its impossible to reattach the coaxial antenna cable! Looked up the chip and it appeared the connector was the MHF4. At first when i was trying to attach this new one I thought it might be one of the other MHF* sizes as it didn't push on like the old one. But using a small wooden dowel with direct downward pressure it finally SNAPPED on and is very secure. The cable is very long so i had to make a few loops of it. The thing adhesive is nice and sticky. Fired up the laptop and now have 5 bars again! Great price (and I have a spare too), fast shipping and works as well as I hoped.

Edit - The RMA exchange arrived quickly and this time it was not broken. I installed it no problem, although the 2 antenna wires are attached together in an awkward place that forced me to route the wires in a way that isn't very good. Reception is ok, not awesome but not horrible either.So I updated my rating from 1 star to 3 stars since it took 2 tries to get a set that wasn't broken and the 2 wires are attached together in a place that makes it hard to route the wires.Original review:The antenna arrived broken, one of the antenna tabs had broken off of the end of the wire so it can't be used. Soldering job was not good, very weak and not even a dab of silicone or anything to help protect or strengthen the soldered end. Requesting RMA but it's almost not worth the time to package up and return. I'll update if anything changes but it arrived with one of the soldered tab antenna ends broken off.

I have M.2 WiFi/BlueTooth Card in my desktop and when I transferred it over to a new case I damaged the antenna cable so my reception was no longer functioning. I installed this antenna and now it is working again.If you have not replaced these before then let me tell you they are very tiny and you need to pull very hard to get them off. They also go on very hard. I had to push them down with the point of a phillips screwdriver.