

🛠️ Forge bonds that last a lifetime — don’t settle for less!
J-B Weld 8280 PRO Size Steel Reinforced Epoxy delivers a professional-grade, heat-resistant bond with 3960 PSI tensile strength. Its 10 oz capacity supports diverse repairs from automotive to marine, curing fully in 15-24 hours while allowing post-cure shaping. Engineered for durability and precision, this USA-made epoxy withstands temperatures up to 550°F, making it the go-to choice for demanding projects.








| ASIN | B0006O1ICE |
| Amazon Bestseller | #1,569 in Industrial & Scientific ( See Top 100 in Industrial & Scientific ) #105 in Contact Adhesives |
| Brand | J-B Weld |
| Color | Ntroaterproofme |
| Customer Reviews | 4.3 4.3 out of 5 stars (23,512) |
| Date First Available | August 11, 2012 |
| Is Discontinued By Manufacturer | No |
| Item Dimensions L x W x H | 8 x 127 x 203 mm |
| Item Weight | 9.07 g |
| Item model number | 8265S |
| Manufacturer | J-B WELD CO |
| OEM Part Number | 20-1623 |
| Product Dimensions | 0.76 x 12.7 x 20.32 cm; 9.07 g |
| Special Features | 耐熱性 |
| Viscosity | 中間 |
A**ー
素晴らしいです!ほぼコンクリートの強さです、乾燥したら加工もできます。
購**者
2種類の混合型でかなり強固に接合できます。 それこそ硬化後の不要箇所の削除等の整形に苦労するほどです。 接合時にある程度整形しておくことをおすすめします。 耐熱性が高いというのも他の同種にはあまり見られない良い特徴の一つだと思います。 今回使用したかったパターンは2つで、1つはやや力がかかる比較的面の広いパーツの補修で熱がかかる箇所に近いのですが、硬化後はびくともしません。 熱でやや変色があるくらいです。 2つ目は少し細いのですが衝撃が伝わるパーツで同じ細さに整形していました。 硬化後の頑丈さは申し分なかくそれなりの回数には耐えてくれましたが、やはり衝撃が伝わるからか接合箇所から折れてしまいました。 これらのことから私が使用したい環境では、盛り付けが可能で静圧や熱に強い反面、細い&衝撃が伝わるようなパーツには適さない、とわかりました。 とは言え、強力なことに変わりなく、特にパーツの形状で溶接困難な箇所の接合や補修に効果を発揮すると思います。
バ**ド
農場用のブルドーザーバケットに穴が開き溶接するか迷っていましたがこの商品を使用してみました。 結果は半年以上問題なく使えています。すぐに溶接出来ないときには使えます。 硬化時間は説明通り12時間くらいで実用強度になった。厚さが欲しかったので厚塗りした際、底抜け防止として 下側はプラ板で抑えて半硬化した頃を見計らい6時間後に剥がして全体の硬化を待った。
キ**ン
1液2液混ぜるタイプですが、ガソリンにも使用できるので重宝しています。 しっかり固まるので、その後やすりで形成 良い商品だと思います。
S**Y
パソコンのスクリーンで使わせていただいてましたが、思うほど長く使えているわけでもなかったので、、、 値段は値段ですので…
笹**一
これが私の手元にあるというだけで、凄い幸福を感じます。日本には様々な接着剤がありますが、その中でアメリカ製を使っている自分が凄く好きです。
ジ**ィ
チューブから絞り出す時はかなり力が必要です。 むらにならない様に灰色になるまでしっかり混ぜないと固まりません。 臭いはちょっときつめですが、かなり固く固まります!
H**I
ジェネレーターカバーのオイル漏れ止めに使用しました。ピンボール程度の漏れがしっかり抑えられました。
M**O
Una delle colle bicomponenti più resistenti che abbia mai usato. Attenzione che però rimane abbastanza liquida, quindi per incollaggi veritcali serve vincolare il pezzo
F**N
El material se ha de mezclar bien, un tubo tiene la resina y el otro el endurecedor. Para que pegue bien las superficies han de estar bien limpias y dejar reposar mínimo 24h si se le quiere dar un uso intensivo a la pieza. Una vez secado tiene un aspecto de plástico gris. El equivalente en KG/cm2 es de 278,4156. Tenedlo en cuenta por si necesitáis una unión más potente.
S**S
I used JB Weld to repair a cracked toilet cistern after being told it would not be possible to repair it. I bought the industrial size tube and I am glad I did as it was smaller than I was expecting. I took the cistern off, laid it flat and spread the JB weld about 1 inch each side of the crack and about a quarter inch deep. I then left it to set for 24 hours. It sets as hard as rock and adhered effectively to the inside of the cistern - Great job all round and well worth the money it cost me. It's black so not good if you want a repair that does not show but for inside the cistern it was fine.
W**H
I used it in repairing washing machine hinge and in fixing granite pieces . It works very well .
N**L
Good ❤️
Trustpilot
3 weeks ago
2 months ago