🚦 Drive Safe, Live Smart!
The Happybuy 3 Pack of 2 Channel Cable Protector is designed to support up to 11,000 lbs per axle, ensuring safety and durability for both vehicles and cables. With its slip-proof rubber construction and modular interlocking design, this product is perfect for a variety of settings, from commercial parking lots to home use, providing a reliable solution for managing cables and controlling traffic speed.
Installation Type | Self-Adhesive |
Item Dimensions L x W | 40"L x 9.7"W |
Material Type | Rubber, Polyvinyl Chloride |
Style | Cable Protector |
Color | 3Pack |
M**Y
Fantastic for home use!
These speed bump cord/hose/pipe protectors are excellent for home use. Super sturdily made from recycled materials. True as advertised sized cable and cord channels. Easily connected and nicely weighted. Thus, with a bit of initial odor, but nothing unreasonable. Particularly if you plan to use them outside or anywhere other than a living area. In our case, we needed something to protect a fuel oil line running from our new fuel oil tank to an oil-fired furnace in our basement because our previous buried fuel line was no longer allowed by local code and running the line overhead proved to be impossible. Thus, these ramps worked great for protecting the new and extremely fragile 1/2" copper fuel line that we had to run on top of our cellar floor at many times less cost than other options. Per my photos, I used the full blocks going across the floor and split the blocks in half lengthwise to protect the line running along the wall. They are not meant for heavy commercial or industrial use and are clearly marked as such. However, I suspect most homeowners would find them to be more than adequate.
R**N
Great for backyard events
When I made a haunted pathway in my backyard for Halloween I need something like this to make it safe to have cords out there. These covers did the job great. Amazingly strong and durable, I don't regret this purchase. I'll have these for a long time.
A**.
Great quality and price
Great quality product with a price to match! Easy to install and use.
B**N
Well built and protects hoses, but could be improved
The rubber base is robust and handles heavy vehicles well, a loaded tractor trailer went over them with no issue. The water hose I ran though them has been well protected. I am using this at the entrance to a Church parking lot, so it sees a lot of traffic two days a week. My main complaint is the steep angle of the incline, which acts as a pretty serious speed bump, which was not my goal or preference. This steep angle can also cause it to be pushed by car tires, depending on how people go over it. One time, it got pushed to the point where the connector joint between two sections broke. If they had made the unit wider with a more gentle incline, it would be perfect. I looked at other models that had a wider top to protect more hoses, but they all have the same steep incline. The wider ones, however, would have more grip to prevent sliding I have considered gluing them down, but have not tried it yet. There ae no nailing holes provided, but that is another option if you don't mind driving nails in your asphalt. Despite the problems, I gave it a four since my unprotected hose was destroyed in a week, and this system is keeping my hose well protected.
C**S
Stronger than rated
For the cost, these have performed very well. They have reliably withstood the weight of my 40’ bus, other buses and trailers, heavy construction equipment, etc. Far stronger than the ratings listed. I’ve had them in use for about six months.
B**T
Perfect for running cables at concerts
I use these at nearly every concert that I play. I have one that I cut in half for when I need shorter runs like where the drummer walks out from behind his drums. It removes the trip hazard. These have had cars drive over them so they do have some durability.
C**N
Excellent choice to protect EV charging cord on a driveway
I've owned an EV for 4 years (Tesla Model 3). Because my property has an easement (a right of way for my neighbors to drive to their properties), it's tricky to charge my car. My parking spot is about 25 feet from my house. So I need to run the charging cable to the car from the house over the easement. I've tried a few different cord covers in the past, but they haven't held up that well over time - they move around too much or have simply worn out after repeated crossing of my neighbors' cars.This set of cord covers from Happybuy appear to be much sturdier than my earlier choices. Also, the fact that this cover is a bit of a ramp slows down one particularly nasty neighbor who liked to drive over my cord cover at high speed, inflicting as much damage as possible. She tried that once with the Happybuy cover in place and probably smacked her head into her car's ceiling (sorrryyy... NOT!). That slowed her down.Anyway, the HappyBuy cord protector ramps install easily, fit together well and have plenty of space for an electrical cable even thicker than my current 20 amp/12 gauge extension cord. You could easily fit a garden hose in one of the two channels. The only issue is that they do slide ever so slightly after repeated car crossings. I've just nudged them back in place with my feet, but I will probably use a bit of construction adhesive underneath them in order to anchor them more securely to the cement driveway.Will post an update if they develop any problems over time, but so far, so good.UPDATE (February, 2023): Well that nasty neighbor struck back. She started revving up her car to a high speed and slamming the breaks when on top of the cord cover in order to force them to slide, thereby causing the covers to separate and exposing the cables inside. I have Ring camera video footage of it. It's actually kind of humorous to watch. Some people must have very sad lives. Anyway, I tried a couple of different construction adhesives, but all required over a day to set, and none of them held the covers in place for long. My ultimate solution was to use Tapcon concrete screws to hold the cord covers in place on my driveway.By the way, after melting a couple of the "titanium coated" Tapcon bits, I discovered that these mortar bits work *much better* when you use an impact drill, as opposed to a regular drill. The impact drill allows the Tapcon mortar bit to drill through concrete and cement pretty quickly without melting. I also poured a little water into the holes to keep the bit cool. Once I secured the cord covers in place with the Tapcon screws, they stopped moving entirely. Several months later, they are still firmly in place. This does make it a little more difficult to do leaf and snow cleanup (since I can't move the covers now) but the power cable is well protected, which is the important thing.Happybuy Cord Protectors (with Tapcon screws): 1 - Nasty Neighbor: 0
Trustpilot
2 months ago
3 days ago