INJORA High Clearance Links Set - Stainless Steel Chassis Links for 1/18 RC Crawler FMS FCX18 LC80 Upgrade

Welp took everything out of the package to assemble and one of the threaded pegs were broken off the link. Everything from injora I've bought has been top notch but this was depressing.05/05/2025 Edit: I received a message from injora saying they would replace my broken item and sure enough today they sent me a package with new links...thanks for the excellent costumer service!

Good robust

These do not fit fcx18 lc80 with angled drive shafts. None of them are the proper length the front uppers are 1/2inch to long the front lowers are the same and the rear are to short all uppers and lowers are the same length on the aftermarket so no special place they can go but the factory are shorter than the back on all rods so will not work. They my fit a fcx18 that is newer with straight drive shafts but will not fit mine.

Took a star off for lack of instructions. I'd even accept just a parts lists for each platform. I'll assume some of the leftover parts are for other platforms, but buyers shouldn't have to guess which ones work for their rig.For whatever reason, finding install info on these links is difficult. Plenty of videos showing off the parts after installation, though. So, I hope this review helps other LC80 folks.After much thinking and trial-and-error, this is what worked for me. Your solution may differ.- Used a threaded type link end on the frame mount of the upper link (like stock). I found the upper link at the frame mount doesn't really articulate in a way the requires a heim joint. Trying to use a heim joint required using the nyloc nuts and the longest screw. The longest screws are also used elsewhere and there aren't enough to do both. That and I thought it looked goofy with the big nut and screw end sticking out. There are shorter screws that reach the nut, but don't thread all the way through.- Proper orientation of the ball insert prevents the lower link from contacting the frame at full stuff. Also, the thick side of the ball insert is bowl-shaped on the end and accommodates the screw head nicely. (See ball insert "A" in last photo)- Used ball insert "B" for the shock mount.Lower links come very close to the frame at full stuff, but don't appear to make contact. I can slide a piece of paper between the link and frame. I've tested the links and everything seems to be operating normally. In the end, I'm satisfied with the purchase.

These are great, I use them on a ucx2405 and they fit perfectly and extended the wheelbase quite a bit. If you do this mod you will also need longer drive shafts. Overall the quality was 10 out of 10.

Most challenging Injora puzzle to date! Finding the right combination of bushings and rod-ends for your particular rig specifically. It works well once you solve it.

I wish they were put together at the factory but that's ok. They go together pretty easy. They also fit the fms stock ball screws at the bottom of the stock fms shocks which is nice while I wait my injora shocks to arrive. I didn't use the smaller ones that replace the y connectors because I don't need them.