Coating Kit (30ml + 50ml) – Professional Car Paint Protection, High Gloss, Hydrophobic, Long-Lasting Shine 3–5 Years, Complete DIY Detailing Kit 9H Hardness

Well, I'm the first review so I hope I help! This product was very straight forward, presented nicely (Thank you for putting gloves in the box, seriously, I needed them, thank you). The application was easy, cure time between coats was perfect for working panel to panel worked out really well for getting the car coated quickly. Dry time was around 2 hours between base coat and top coat. The top coat caught me off guard a bit, could definitely tell that it stuck to the car. Took a bit more elbow grease to remove, but came out very nicely. Given the first car I put it on was black (God help me) I needed to make sure that there would be no smudges or anything, and this product was very easy to work with to make sure that didn't happen. I'll be back on here soon with an update after two weeks from returning my customers vehicle to see how it stands up with customer feedback from personal washes and being in the weather. So far, so good and Im looking forward to working with this product again very soon.

Definitely made a very noticeable difference. Took me about 5 hours, but it was worth it. The hardest part is knowing when to buff off the 1st step. I mean it just say 45 to 60 seconds for the shock effect depending on the temperature. I have my car in the garage with the door closed but 45 seconds was too long so I had to do anywhere from 20 to 30 seconds. So definitely test it on a very small area first so you can get the hang of it.

Just put this on a new Jeep Cherokee. Went on fairly easy, putting the base coat on, then letting it cure for a couple hours, then the top coat. My biggest gripe was there were no instructions in the kit at all, so you had to go online. Why? Does it cost that much to put an instruction sheet in the kit? Even online the instructions were brief at best. Base coat: Wipe on, then let sit 2-5 minutes and wipe off. No info on whether it should dry before wiping, or wipe off wet? Believe me, if you let it dry to the touch you can hardly get it off! So I let it sit a minute and wiped it off, polishing out all haze. Top coat was simpler, not sure why it was in a spray bottle, but it went on ok and made the surface much slicker. There also was no info on whether I could put it on a new car, or if factory paint had to cure first. Hopefully it is ok to put it on a new car that was built in last 30 days. I give it a 4-star (I won't know for sure for several months) because: - No instructions in box, and online was vague - BARELY enough base coat to do a mid-sized SUV. It would never do a Tahoe or Suburban I'll know more in a few months as to how it stands up. The liquid is consistency of water (both base and topcoat). But it seemed to be doing something (especially the base coat).

I was a bit skeptical at first about this product because the claims are big but after having applied and seen the results on my 2008 Lexus GX 470 I was very happy. You really want to work in a shady area and in small sections for the best results and have to follow the directions which are very clear as closely as possible. You need a very clean non waxed surface to start with. So far I have had the coating on the SUV for a few months and it has held up great. I off road a good bit and wanted something to protect the clear coat from pinstriping from overgrown bush on the trail. This coating is pretty tough. Water still sheets and beads up in the rain or when I pressure wash the SUV. And cleaning is very easy now. Still a good idea to use a shammy after washes for the cleanest look. I would buy it again. Teadious to coat a large vehicle but worth the effort.

I didn't have time to apply this product before winter hit here in Alaska so I used the Turtle Wax Hybrid Solutions Pro Flex Graphene and that product was very slick and beaded up like a champ. It seemed to last very well after several washes even with our disgusting road tar up here. I just did all the prep and applied this Drexler ceramic product- 2 base coats and one top coat (I had barely enough top coat). The end result LOOKS good, but it does not FEEL slick at all compared to the Turtle Wax graphene. I am very concerned that it will not bead up or last. I am curious if other people have seen similar results where it looks good but does not feel slick. I really hope I didn't waste several hours only to get a result that is nowhere near as nice as a product that is 1/3 of the cost and feels better. I'll update in a couple months.

I love this stuff! Easy to put on and the shine is so amazing! I’m a detailer so Just remember before you use ceramic make sure you clean your paint get it all paint corrected then ceramic for better results!

I am pleasantly surprised at the results I am achieving using this product. Unfortunately I live in Florida, and we tend to get rain storms every day. So it’s hard to avoid getting water on it for 24 hours but luckily I cleaned out the garage and have been keeping it in there during those times. Also and because of Florida, the drying time is fairly quickly so I have learned not to wait more than a minute before I start wiping or it becomes very difficult to get off but I seem to have my act together now and the roof of my black Mercedes SL 550 shines like crazy now. Once I get more time I will be doing different sections of the car oh and the water beads Like I’ve never seen. Do not even attempt to do this in the sun or on a windy day, the best places inside a well lit garage do not even attempt to do this in the sun or on a windy day, the best place is inside a well let garage. Having to wait 2 1/2 hours in between part one and part two is a bit time consuming but You do what you have to do to have a shiny car. I hope it lasts, time will tell.

was a looong process. from washing, claybar, wash second time, wiped down with alcohol, first coat, second coat, top layer coat. waited 2 hours in between coats. started 10am was done 4pm : ) first time ceramic coating a car. used lots of towels. looks professional, my 2018 black paint looks very deep and black again. biggest thing was (do not let it dry) wipe if off when its still wet. 15 to 30 seconds. my first few patches i let it dry too long, was a pain to wipe off. the kits needs more of the little white towels that go over the pads. the towels were hard the first half of the car. have half a bottle left but no more of those little towels to apply.

C’est un excellent produit de détailing auto , mais réservé aux connaisseurs il faut comme tout s’entraîner et les résultats sont parfaits , une fois le traitement terminé et ayant attendu le temps de séchage recommandé je passe ma voiture au karcher quand elle est sale et elle redevient très propre et brillante à chaque lavage , c’est un produit professionnel pour les amoureux de belles carrosserie automobile.

Questo è l’unico prodotto che abbia provato (quindi non posso fare paragoni) però sono molto soddisfatta del risultato finale. Io ho dato il prodotto sulla mia auto nuova fiammante di 1 mese (essendo nuova ho solo lavato a fondo e pulito ancora con l’alcol isopropilico, dando per scontato che la carrozzeria fosse già perfetta così). Di fatto ho impiegato tutto il giorno, tra lavaggio preparatorio e per applicare il prodotto (infatti questo è l’unico neo…ci vuole pazienza e olio di gomito! Ora infatti capisco perché farla fare costa così tanto!). Dopo averla pulita perfettamente ho iniziato con una superficie di 30x30 e ho dato il primo prodotto, dopo 3-4 minuti ho tolto l’eccesso con il panno in dotazione. Man mano che prenderete la mano, riuscirete a fare porzioni più grosse e soprattutto nei tempi di attesa farete altre parti. Fondamentale è farlo in un luogo chiuso per evitare contaminazioni esterne portate anche dal vento. Con il prodotto sono riuscita a fare tutta l’auto, compreso il tetto (Sandero stepway - auto di media grandezza) e dopo un paio di ore ho fatto una seconda mano sulle fiancate e cofano (parte bassa). Dopo i tempi di attesa ho passato il secondo prodotto molto più veloce (soprattutto qui mi è servito un panno in micro fibra extra, perché quello in dotazione si è impregnato e non asciugava più). Il secondo prodotto mi è bastato solo per una mano e l’ultimo goccio l’ho dato al parabrezza in vetro. Il primo prodotto nano tecnologico l’ho passato sopra gli adesivi, targhe e fari tranquillamente. Ho lasciato fuori le parti in plastica rigida neri (passaruota ecc.) perché avevo visto che c’è un prodotto specifico e perché altrimenti forse non sarei riuscita a dare la seconda mano alle fiancate (cosa che mi interessava per le sportellate - anche se non so quanto possa proteggere da quelle). In ogni caso dopo 12 giorni ho lavato l’auto e mi sono accorta di aver esagerato con i gettoni soliti (3-4 gettoni), era già pulita bene con 3 e il quarto mi sono resa conto essere per di più! L’acqua si raggruppava in goccioloni come avessi passato un’ottima cera abbondante! Unico neo è stato che asciugandola ho impregnato più del solito il panno, ne porterò dietro un secondo. La mia auto aveva solo 2 Righi fatti da una sportellata al parcheggio, sono miracolosamente scomparsi senza fargli nulla (nessuna pasta abrasiva, solo dando questo prodotto che evidentemente ha riempito i graffi). L’auto ora è bella lucida, ma essendo nuova non ho visto grandissima differenza apprezzabile per quanto riguarda la lucentezza. L’ho voluta coprire per mantenerla lucida e nuova più a lungo. Comunque sono soddisfattissima per ora. Lo consiglio a chi è consapevole che la procedura richiede quasi una giornata e abbondante olio di gomito!

+bescherming van auto lak +bescherming van de motorfiets

Brilliant product, excellent results, but make sure you follow the instructions & do smallish areas at a time. You can see the shine on the attached photo, the car has not been waxed polished, simply washed & leathered dry.