VEVOR 15 Ton Hydraulic Puller,hydraulic gear puller Bearing Hub Separator 2 or 3 Jaws Gear Puller Kit 100-300 mm Hydraulic Gear/Bearing/Wheel Bearing Puller Separator

Solid and works as it should do note you might want to get some short jaws to go with it as the piston stroke is rather short for larger vehicles. Note that's not a fault of the tool just advice.

Wow was not expecting tool to be as good as delivered claims to be half the price of other leading brands would expect to pay up to £300 for this must be a mistake 😳😎

Firstly, this a heavy tool, about 10kg, and it's physically big, so might not be suitable for all kinds of work. Having said that, I've used it for motorcycle final drive repairs and that's lightweight work. It's quite substantial, seems well made and makes light work of disassembly of any pressed components. I can see some possibilities for converting it to a table top press with a couple of plates made to fit it. The length of travel of the ram is around 120mm and with the length of the legs this might make some jobs impossible unless you have a set of bearing press collars to make up the difference. Very capable and good value machine with some thought can be very useful.

This is for large vehicle use only. Much too heavy and large for car hub puller. This needs to be made clear the threaded shaft is 60mm in diameter which is too large to go into a car hub. The pullers are also very heavy and will not go behind the hub plate. A heavy bit of kit that needs two to operate and is only suitable for industrial use.

Very heavy certainly not suitable for car bearings

Je suis extrêmement impressionné par la qualité et les capacités de cet appareil. Je cherchais depuis un moment un extracteur, pour enlever le moyeu d'un véhicule, et tous les extracteurs que je trouvais dans les annonces étaient trop petits car trompés par des photos avantageuses. En lisant les capacités, souvent bien cachées, je m'apercevais qu'ils étaient trop petits. J'ai trouvé l'annonce de Vevor et l’extracteur YL-15T hydraulique d’une force de 15 tonnes. J'ai dû, néanmoins, fabriquer un axe M12x90mm pour le montage sur lequel je travaillais. Félicitations pour la création de cet outil.

I used this to pull a flywheel off a dixie chopper mower to replace the starter where the 2 bolt gear puller failed. This worked amazing. The claws are huge so I had to cut some of the metal flywheel shroud behind the seat and then bend it back when done. But the job is done and I saved a ton compared to taking it to a shop.

Parfait très solide

My brake rotors were rusted and stuck. I hammered them, tried to use a mechanical puller and was almost giving up.. before taking the car to a shop, decided to order this hydraulic puller. Waited 2 days for the delivery, but once I got it I was able to remove the rotors without any issues. Pumped the lever 3 times and they popped off. Great product.

Works as advertised it moved my old stuck gears effortlessly if you get the claws locked on it will move it