MegaTank G3270 All-in-One Wireless Inkjet Printer, Home Use, Print, Scan and Copy

New box came, I weighed it, 19 lbs. The printer, once unboxed weighed 12 lbs. Instead of reading the destructions, I used some unboxing and set-up videos I found on YouTube. One thing that surprised me is that you have to install the 2 print heads. They just slide right in like it was an old style ink cartridge. One is labeled B (Black only) and the other C (color). Takes 10 seconds but remember to remove the tape on the print heads. It's great that you can easily replace the print heads if they get clogged. Canon sells them for about $30 for black only or $40 for color. This next thing I absolutely love. The ink bottles are keyed. You cannot put them in wrong. The ink bottles drain in the printer for less than 60 seconds. No mess whatsoever As someone who once put the wrong color ink cartridge in an Epson printer, I learned my lesson. That was, of course, a disaster. I had the most difficult time finding the USB port. Its a couple of inches above the power plug port but it's really hidden. But, there is one real down side to this printer. It's the incredibly tiny (1 x 1 inch) display that is very difficult to read and must be used when setting up the printer. It's awful. The contrast is terrible and I have yet to find a way to control it. Once you do get it setup you probably won't have to ever use it again because the App allows you to everything you need from your computer. I have not tried to wirelessly print yet. I’m Old School (emphasis on Old) and I prefer not sending my documents through the air. Update: I didn't use wireless because I thought that I couldn't scan wirelessly but I now can. There's a U Scan utility that I had to download and it works flawlessly. I can print and scan from three different computers (all Window's PC's). I'm not a Mac guy so I can't vouch for that platform. Print quality is very good as is the scanning. It's all brand new so of course everything works. I would rate the quality overall as a SOHO or just an occasional printer use. This is not for a graphics professional, but college student, definitely. Printing speed is a little slow. You can duplex print but only manually. You have to flip the paper. Some pretty cool options in the software. A deep cleaning mode, an actual page count and a graphical representation of ink levels. Update: I can't find the graphical representation of individual ink levels but that was working when I did the initial install of the ink tanks. So now, I just look at the ink level windows. But still, for the money and usability, it's very good. I'm pretty happy.

Pros: Easy setup, 1, 2, 3, follow the instruction, No problem. WiFi with the tiny screen took a second to connect. This is a great little printer. Good quality prints, sharp and clear, good color, Ink lasts a long time. Cons: The printer feels cheap, the quality of the plastic all around feels thin and fragile. I have a Canon Pixma 7120 that feels like a tank, glossy plastic cover, felt strong, still going after 8 years or more of good printing. The little tiny LCD screen, really Canon, its hardly visible. What happened to the giant (in comparison) LCD screen like the one on the P7120??? Only reason I'm replacing it is Windows 11 - printer is not 100% compatible. It will print but I can't scan and I need that feature. Back to the G3270 - Love this little printer, I'm careful opening and working around the covers so nothing will break. Double sided printing is possible but you have to reload the sheets into the try and print the second side. It does not print double sided sheets automatically like the P7120, bummer. Takes up more space, although a smaller footprint because of the rear paper tray. The paper stands tall so you need room above the printer to load the paper. I raised the shelf to 14" above the printer to accomodate the paper tray. It's easiler to load the paper but it takes up space. Beautiful pages of black and white text, color printing is wonderful, really improved over the P7120. Mega Tanks are awesome, easy fill and they remain full after literally 100's of pages of printing. I've been through three reams of paper and still going strong. I'm talking about double sided pages of full text, powerpoint presentations with notes and various signs in color. GREAT. I looked a the big brother the G3290 (with the larger screen) couldn't find one online or at a local store?? Yeah, they are available now after I bought the G3270 WHAT?

When my 3-year-old Epson Eco tank AIO printer gave out I did some research online and this printer kept coming up with consistent 5-star ratings, so I thought "why not"? Now first off, I have to say Amazon REALLY messed up the delivery! The day it was supposed to arrive I got a text saying it had been delayed in transit and was going to be here the following day. When it didn't arrive, the Amazon driver stated he couldn't "gain access" to the apartment. Further investigation determined he "got lost", and these drivers have a satellite map system in their delivery trucks? When it eventually arrived another day later (2 days late in all) one corner of the packing box was damaged and there was no Styrofoam "peanut fill" inside the box, and as the packing box was much larger that the printer box, I was worried about damage to the printer from it sliding around in the packaging due to the rigors of transportation. Fortunately, there were none. SO, for all the mess up with delivery, sorry, but Amazon only gets 1 star for their role in this. Unpacking the printer was easy, and after placing on the printer stand section of my computer desk, I started the installation. No instructions are provided - you are directed instead to Canon's website for installation and setup instructions. As I did not want this taking up bandwidth on my Wi-Fi I used a USB cable; BEWARE, if you want to do the same as no cable is provided, but fortunately I had one hanging around to do the job. Following the installation instructions online was pretty simple as was filling the ink tanks, however, DON'T use ALL the ink in the bottles, but instead watch closely on the outside "windows" for each color ink tank until the ink reaches the clearly marked "FULL" line and then quickly remove the ink bottles. The rest of the set up was pretty straight forward, downloading software, drivers etc., but for some reason Windows 11 didn't auto detect the printer the first time I went to use it, so I had to shut the printer down and re power it up for before Windows found the printer. The print test was perfect, and the auto alignment also set the thing up perfectly. I scanned a document and a picture, and both appeared to be reproduced faithfully when compared to the original documents. I deducted 1 star because unlike most AIO ink tank printers in its class, it doesn't print on both sides, but I was aware of that before purchase, and the issue of initially failing to find the printer in Windows 11 also factored into that 1-star deduction. As I said, I use mine plugged into a multi-USB port extender bank so I can't speak to ease of set up for Wi-Fi. I also don't do any highly sophisticated color printing, such as high-res photos, so I'm not sure if it will hold up to that type of usage but it certainly meets my needs. Conclusion? A pretty good ink tank All-in-One printer for home and home-office use, and it goes without saying that in common with all these ink-tank printers available now, this will save a TON of $ compared to the old inkjet cartridge system available on other inkjet printers on the market. Will it last as long as its predecessor? Don't know obviously but the initial build quality appears to be top notch.

Since 1995 I've used many printers starting off with a Canon bubble jet. Since then I've used Brother, Canon, Lexmark and Epson. Admittedly for print quality Epson's sub lim dye is the best printing you're going to get. Their ink also lasts longer in regards to photo-life. As far as cost and availability of their ink at stores though is another question. Cost-wise they're all pretty much on par with each other for all brands these days. You can improve the print quality on Canon printers but you'll have to fool with the settings to get there which I don't mind doing. You'll also use a little more ink but that's the cost of quality. The Windows App made setting this printer very easy and kudo's to Microsoft and Canon for that. This is my first tank printer which I'm looking forward to using but you have to keep in mind that if you don't use the printer at least some what regularly, the ink to the printhead WILL dry out if you leave it idle for too long. Keep that in mind for EVERY printer unless you're using a laser jet. After adding the ink and updating the software I printed out my test page, simply scanned it and the printer itself set the print alignment to it's best settings. Super easy! Print outs aren't the fastest which is fine I'm not looking for speed to be honest. Print quality is very good on standard settings but I'll probably set it for best print quality later. Canon printers inherently have a sequence of sounds that hasn't changed in 28 years lol. Same for most other brands too. Not annoying but not silent either so don't expect that. It's no louder than the other brands. Canon has always done good black and white printing well before the other printer brands and their color quality has improved significantly as well. Having tanked ink versus having to buy cartridges is VERY cost effective! You essentially pay double for the printer but save long-term in the amount of printing (the REAL cost). We used to have a Cartridge World store that would sell refurbed ink tanks that worked 100% of the time but that location closed recently and sadly. If you have one near you I highly recommend them! I had recently bought an Epson XP4200 AOI printer but finding the cartridges took some time and forget locating them in your local store unless you get lucky, then came the cost. The XL cartridges range $30-$50 which is about what I paid for the printer new. Even off brand ones aren't that cheap. Having a tankless printer saves me time in finding ink and saves me a ton of money over having to buy overly expensive cartridges. Many of the 3rd party ones don't always work either so it's iffy in regards to cost savings. If at some point I have to do the printhead bath to clean them I don't mind, it's well worth it for not having to buy outrageously expensive cartridges. I'm done with them! I definitely recommend this printer even if you're only doing average home use. Just remember to use it every week even if just once.

Terribly inefficient connection, unreliable color accuracy, and confusing support from Canon (or lack thereof) I thought I had found the perfect budget printer for starting my art business.. the glowing reviews online and the promise of longlasting inks compared to other companies. Suffice to say, after hours of frustration, bouts of rage and wasted paper, I am extremely disappointed. I think the ONLY net positive about this printer is the fact that the inks look like they will outlast any of the cartridges from other printers like Epson, while also being so much cheaper to refill. Which is WHY I am so angry and disappointed at this piece of junk. Unfortunately, I'm going to have to go back to Epson, which I DID NOT WANT! And here's why: 1. Excruciatingly slow and inefficient wifi: This printer's ability to connect to wifi and stay connected is ABYSMAL, it constantly goes offline between prints, it struggles to reconnect and you will spend up to 30+ minutes waiting for a single sheet to print while having the dreaded "Unable to Locate Printer" screen loading forever and ever. As a small business owner with deadlines, the constant connectivity issue is impossible to sustain. To top it off, it doesn't come with any ethernet port, and you're forced to buy a special printer/usb cable just so you can reliably use this printer. I don't want to have to pay an additional cost for something that should have been included with this printer, just to fix a problem that shouldn't even exist! I never had this issue with my Epson, or any other device! It makes no sense! 3. But this was the dealbreaker: DULL, WASHED OUT COLORS AND INCONSISTENT RESULTS ACROSS ALL SETTINGS AND PAPERS!! I have tried every single iCC that canon offers (which by the way, are not available in photoshop for some weird reason, despite all the epson paper settings being there without me having to do anything. I've installed the driver on my mac and even had to ask chatgbt for help to no avail) and different papers. My blacks are printing gray on cardstock, then brown on another paper, no matter what I did, it never prints black correctly!! I printed another design with the same exact paper on Epson, and compared that with Canon. The Epson print looks vibrant and matches the colors on my monitor perfectly, while the Canon print is COMPLETELY WASHED OUT AND DULL by comparison. Same exact settings, same exact print, tried all the other settings, NO IMPROVEMENT! There was like 1 print that came out where the blacks were close to accurate, yet with the same exact paper and settings it has never happened again! I've wasted so much paper for nothing!! 4. Lack of a physical manual or a link to an actual guide, you are forced to download their app and go through several hoops to find a visual setup procedure. There are no videos or troubleshooting steps I could find from the website. The printer automatically comes with a useless feature that tells you there is no paper loaded when there is, and you're forced to figure out how to turn it off on your own. Navigating the settings on the printer's tiny screen is equally confusing. Now, I can suffer through this thing's abysmal wifi by paying extra for that cable, I can suffer through the lack of a physical manual and useless/confusing setup guides from Canon's app, but the color inaccuracies and lack of steps to fixing them are a huge no for me. The only reason I returned my Epson was because it smears any paper with gloss in it, and there is no fixing that. The massive HEADACHE and mental turnoil I've suffered from having to DIY my way out of every endless caveat with canon's pixma g3270 is simply not worth it. I'm returning this thing ASAP

The Canon G3270 printer is plugged into my venerable 2008 iMac running Ubuntu 25.10 (Apple makes a good product but they end support way too early) and it works great right out of the box. The G3270 supports Linux and for the Ubuntu operating system it is plug and play. There is no user manual included and the only instructions are to install Canon's printer app for Windows or Apple and follow the directions. No apparent support for Ubuntu and this might have been a problem; however, the Canon website has some FAQ for the G3270 which provide sufficient information. Here are the steps: 1. unpack 2. remove the tape from the printer lid 3. plug into the computer using a USB cable (not included) 4. plug into power 5. power on and follow the instructions on the printer's screen (three more steps as follows) 6. install the two printer head cartridges 7. fill the ink tanks 8. add paper and run the initialization (6 minutes) Both print and scan functions work as usual, but the scan is pretty slow, maybe 30 seconds or more. After printing the Ubuntu printer test page, I scanned it to see how it looks. I also scanned in the nozzle check test pattern to see how well it picks up the colors. It is good enough for my purposes. Filling the tanks was so easy that I thought I must be doing something wrong. Nope, the bottles have tops that prevent you from putting the ink in the wrong tank and the tanks hold precisely one bottle of ink so no overflow occurs. No ink on my hands what-so-ever. The Canon website has Linux drivers, but there was no need to install them. Maybe there is some advantage with the drivers installed, but for me, "if it ain't broke, don't fix it." I am quite happy that this printer is supported by Ubuntu both for printing and scanning right out of the box.

This review is weighed by its cost and performance. I had short term need for a scanner not a high volume printer and ended up impressed by all aspects. Okay the scanner software is clunky but works and is free. Printing quality is very good even compared to machines far more expensive. Haven't attempted faxing but with scanning direct pdf I likely never will need to. Yeah the screen is very small but clear enough for 77 year old eyes. If your needs are limited or wallet is strained one can't go wrong with this all-in-one printer.

I’ve had this printer now for about a month. Overall it does a decent job at printing high quality images. (I use it to make collectible, non-tcg cards). However, if you are buying this printer to print lots of full color images, be warned that the print heads may get clogged. After a week of not printing, my print heads were clogged. Tried cleaning them with a solution recommended for this printer model, and it made it worse. (Could have been something I did wrong). Either way, finding a replacement printer head is quite difficult. You can only buy a legit canon head on the canon website. No stores sell it, which is quite frustrating. Overall, the printer is decent. Seems like print quality does go down when you’re not constantly printing with it. Connectivity was easy. The app is ok. I will also note that it does lose connection with my devices sometimes, but not enough to affect my rating. All I’d say is I wish it was easier to buy replacement parts.