CURT 45900 Adjustable Trailer Hitch Ball Mount, 2-Inch Receiver, 6-Inch Drop, 2 and 2-5/16-Inch Balls, 14,000 lbs

This is a very heavy duty hitch. I purchased it for a number of reasons, (1) I thought since it was Curt it was USA made but found out it is made in India. Disappointed that Curt's website is not more open about it but the quality seems to be very good (2) I needed 6" of drop and this hitch does that and is easy to adjust. (3) Most adjustable 2" receiver hitches are rated for 7,500GTW for the 2" ball. This hitch is rated for 10,000 lbs for the 2" ball which exceeds my truck"s rating. I did not want the hitch to be the weak link when I am towing. I'm very happy with this hitch and feel that it is a good value for the price. (4) Quality appears to be high. The coating seems tough and the tolerances for fit between the hitch ball (all forged not welded!) and the channel are very good as in close but not tight.

Heavy duty and USA made quality for sure, nice adjustability if your looking for a heavy duty hitch this is what you want its solid and heavier than it looks also I believe there is an optional pintle hook attachment available

Just put 500+ miles on it towing my boat. A couple of criticisms. 1. The tolerance accumulation of the cross pins for the ball mount to the channel holes provide gaps that will result in rattles. I solved this by wrapping .020 thick Inconel sheet stock around the 2 cross pins and installing this into the channel. Solved the loose fit easily. Kurt should review the tolerance stack of these items to reduce the gap but still providing a "go" fit. 2. The cross pins supplied are non-locking as they have a simple hitch-pin (hairpin cotter pin). To lock the forged ball mount to the channel you need to purchase a wide locking cross pin. So understand that this adds to the total cost. All in all, I am still impressed with this purchase and would recommend it to anyone in need of an adjustable heavy duty mount. I am an aerospace engineer by profession, and I rarely gush over a purchased product. However, this mount exceeds all of my expectations. Those claiming it does not have a setscrew or poor cast metal quality - I suggest they spend some time reading the Curt Catalog. First, model # 45900 does not have a setscrew - it uses a rubber bumper/snubber - by design. Only select part numbers use the setscrew. Secondly, the 45912 double ball is not a casting - it is a forged product and I will take a forging against a casting of similar design any day due to superior grain refinement and metallurgical properties. Regarding"made in India" - the only indication of this is on the package itself. I have asked Curt Tech Support if this is correct. Regardless, the main ball mount is well-designed, with double-gussets spanning the long side. Full wrap around welds (semi-automatic MIG welds I believe) look good to my eyes, and I look at welds every day on products that fly on commercial aircraft. A single gusset on the short leg is also well executed. All-in-all, a well-designed, well fabricated adjustable ball mount and I look forward to its first use. I would be stunned if my opinions change after this. My only wish it that they would offer a similar part in stainless steel, especially the 45912 double ball. Corrosion generally occurs as this is the interface to the trailer coupler and the ball carries the towed load and wears thru most every coating available. As another thought, I may have a similar part machined from 6Al-4V titanium plate. That will solve any future corrosion problems and the part will be substantially lighter, albeit a bit expensive.

I purchased this unit to use on my lifted 2004 Dodge 3500 4x4. I needed to have the flexibility to tow any trailer I would come across with this truck and since it was lifted I knew I needed a significant drop to ensure the trailer was level while towing. I chose this unit because of the price, the quality and the features. The quality of the unit is great. Everything fits the way it should. All holes lined up how they are supposed to both with the hitch on my truck and with the adjustment for the ball on this mount. The welds look to be quality and there are not rough or sharp edges on the unit. I see no areas where there appears to be any damage or low quality workmanship in the manufacturing. The features of this unit were probably the primary reason I went with this on. Often you see the cheesy lifted trucks rolling down the road with these giant drop hitches and I think they look ridiculous and seem like the may or may not be safe. This hitch has just enough drop to be versatile for any trailer and it allows the user to make it a rise hitch as well. If you vehicle is low to the ground you can flip it over and use it to tow a taller trailer with the lower vehicle. The pins that come with it make it pretty easy to adjust. FYI if you put the pins in opposite each other so the retaining clip is on opposite sides it is much easier to install and take out the retaining clips. This was the only feature that wasn't great on the unit. This is also the heaviest rated adjusted ball hitch I could find. With a 14,000# weight rating for the 2 5/16" ball there's no way you'll find a trailer out there that you can't tow. Id guess that is probably the overall limit you'd want anyway with a bumper pull. Anymore than that and you should be running 5th wheel or gooseneck. So this unit should be the last and only one you'd need to carry. The price is the same or lower than any other one I could find. Very reasonable and it really shouldn't wear out so its an easy one time purchase knowing that you'll have it for many years to come.

Buena calidad

Curt quality is always the best

Great quality hitch!! It has some heft to it, but worked great on my lifted vehicle, allowing me to tow a trailer across Canada, while keeping the trailer level!! Pretty easy to adjust.

Livraison rapide ! Elle me semble de qualité tout en acier forgé très lourde 👍sa me prenais du solide ! Elle reste à passé le test ! 14 000 livres !

Read some reviews of inconsistent manufacturing, twisted/warped welds etc. My unit showed up square and the welds appeared quite good visually. Very heavy, works well, price was acceptable. Seeing "Made in India" isn't usually very confidence inspiring, surely there must be a way to get back to US, or Canadian manufacturing.