PLA Matte 3D Printer Filament 1.75mm, PLA Filament 1kg Spool (2.2lbs), Dimensional Accuracy +/- 0.02mm, Matte White PLA

Sunlu filaments have been a reliable and solid choice for my prints. Whenever I need a new roll, I always search Sunlu [color] first. The matte finish is easily one of my favorites too. Spools come wound neatly with no tangling, and they print smoothly without drying them first. I've had other brands that worked for a while and then started causing clogs, but not Sunlu. The spools work prefectly in my Bambu AMS, and I love the ability to reuse them for other projects or just for a filament refill.

I bought both white and black versions of this Matte filament. Both work great on my Bambu X1C. The print quality with the built-in Bambu Studio profile has been top-notch, and I did not experience any clogging, stringing, or other issues. I chose to dry the filament before use, given the high humidity in my location, to avoid Stringing and other quality-related issues. The spool was well packed, and the vacuum seal was intact. It loaded and ran easily in my AMS unit.

Prints great! The spools are also reusable which is awesome to be able to reduce waste and to swap on refills. The color looks great and matches the much more expensive bambu labs filament I had before pretty closely. Had no issues with it being brittle or clogging the hot end.

Sunlu is my all time favorite. It has best color quality with wide range of colors. Functional really well with all different types of 3d printers ranging from Bambu lab to Prusa. No stringing, no clogging no brittle. Come totally sealed and dried ready to use.

I've never had any issue with Sunlu filament and generally have always had a good experience printing with them. Print wise- nothing has change. Ease of use, however is a different story. The new blue spools look very nice and appear of better quality- thicker plastic and more enclosed to help with clean windings. The issue is they appear to be shorter width and diameter by a small margin- but its enough that it now causes issues with the AMS system for the BambuLab P1S, X1C model printers. The smaller spools are now not as large and do not sit as nice a gap on the AMS rollers; this results in rubbing against the bottom of each filament slot in the AMS unit. Which leads to the AMS overworking the motors as there's more friction and drag on the system. This caused issues multiple times while feeding and unloading. I ended up respooling to an empty BBL spool - no issues after. It also happened again with some Sunlu Glow in the Dark PLA on again- new spool - same issue. Respooled on a printed empty spool. No issues after. A benefit of Sunlu filament over say Esun or similar other vendors was that stock PLA profiles worked very well and Spools were AMS friendly out of box. Others had cardboard spools or spool sizes that caused issues. The price was also nice. But if you print alot or have a print farm- respooling can start to add up lots of time. I'd be ok paying more for an AMS ready spool. Again- the filament prints fine, but the product ease of use overall is less user friendly now.

The spool broke and a large portion of the filament tangled but otherwise it’s pretty good!

This PLA prints beautifully with a smooth, matte texture that hides layer lines. It loads easily, maintains great dimensional accuracy, and offers consistent flow without clogging. The colors match the listing perfectly and look fantastic on finished models. Exactly what I needed for clean, professional project prints.

Overall I really like to performance of the filament. I print minis for DnD most often, and I find that I get really sturdy prints with great definition on those tiny details without excess artifacting or stringing. I live in Seattle, so most of my filament need some extra love from the dehydrator, but I’ve never once dehydrated this spool, and left it in my garage for over a year, fully exposed to the air and it prints as if it was new outta the package. The reason for a three star review is that the spooling of the filament is bad. I usually don’t run in to this issue, as a mini with 100% infill usually only uses 6g of filament. But when I’m doing a 10hour print with 68g of filament, it’s a 50/50 toss up that my spool will seize, snap the filament inside the bower tube, and clog the nozzle. This has happened three times now. The only solution I have is to unspool 50-100 ft of filament before a big print, removing any tangles in the spool along the way, then respool it myself to ensure my print doesn’t fail.

I love the clay color it stands out more then black or white and since i do post process on all my prints the none black/white makes it easier to see issues before i start to work on it.

Está bien hecho, buena calidad, solo que es rosa con naranja, no rojo con naranja. Lo compraría otra vez

Sigo comprando esta marca y nunca defrauda, además hacen muchas ofertas y ayuda mucho al bolsillo.

Caro pela quantidade que vem, não me atentei que eram tolos de 250g apenas.

Filamento de excelente calidad y bastante bien bobinado. El acabado queda impresionante, prácticamente mate en las superficies planas y con brillo muy suave y satinado en las curvas. Esto hace que, con altura de 0,2, las capas ya sean apenas perceptibles. El resultado es casi como de inyección. El único pero sería el color, que no es absolutamente negro. Es como un gris muy oscuro, casi negro (95%). Al ser mate da la sensación de ser mas claro. Pero se nota si lo pones al lado de algo totalmente negro, sobre todo si mas brillante. Quitando el tema del color, el aspecto final de las piezas es espectacular.