Roundhill FurnitureHabit Solid Wood Tufted Parsons Purple Dining Chair, Set of 2

These are remarkable chairs - they are really beautiful, not posh, but good, quality chairs. They look exactly as in the pictures and they are made of wood (the frame, obviously). They are sturdy and well made, at price that is out of this world. Also, don't worry that some parts happened to be damaged: they included a paper form to get a replacement. Mine came in great condition.Assembly: Now, the chairs don't come with an assembly guide (at least mine didn't), but it is pretty simple, though I have a couple of important warnings to share with those who are newbies like me. I'm not a handyman nor I did anything like it before. And I made a few mistakes in the process.First, for each chair there are 4 long screws and 5 short screws, and there are 4 screw holes on one side of the seat (for two front legs) and 5 screw holes on the other (for the back of the seat). But the # of holes does not match the set of 4 and 5 screws (my original mistake). The 4 longer screws and one short screws are meant for the set of 5 holes in the back of the chair. The other remaining 4 short screws are meant to attach the front legs to the seat.And second warning - while attaching the back of the chair to the seat, it is better to screw in all 5 screws at the same time (meaning, you'd screw in one screw little bit, then the next one, then another and so all 5; then you do it again and go in rounds until all are tight. The thing is that while assembling my first chair, I screwed in only 4 long chairs at the same time, adding the 5th, short screw, at the end. And screwing in the 4 long screws was physically challenging because the screw holes are at different angles, by design. But I realized the importance of the 5th screw when it shifted the two pieces (the seat and the back part) and properly aligned all 5 holes, and suddenly the long screws were penetrating with ease and all the way in. When I assembled the second chair, I did all 5 at the same time, and mama mia, how much easier it was.Also, in my experience with these chairs, it is best not to use power screwdriver nor any other kind of similar tools. The tool that comes with the chairs is the best of them (for several reasons), just don't forget to use gloves and alternate longer leg with short one. Power screwdrivers could be even damaging by forcing the screws in the "off" direction (or maybe it just me).

So we bought one set of these chairs to try with a new dining room table. Quite surprised at the quality of these for a set of put-together chairs. they are comfortable and well designed. Fairly easy to assemble. Have seen comments on here about a slight wobble from one of the legs being shorter. Just read the instructions. If you assemble it correctly you wont get that. I tightened up the seat to the back first then with the front legs loosely hand tightened, you can set the chair on the floor and get it all level. Then reach under and tighten one of each front leg bolts enough to keep them in place. Flip it again for easier access and tighten everything up. Done. We liked the first pair so well we ordered a second pair.My only problem was that the legs didnt match our table. The table is reclaimed wood so it's very gray while the chair legs were almost blonde with a pickle glaze on them. So i came up with a solution i will share in case anyone else has the same problem. I hand sanded the legs with 220 grit sandpaper, then took a stiff wire brush to them to get the rest of the stain/glaze out of the texture of the wood. Bought a can of Varathane Weathered Wood Accelerator and hit them with that. 3 coats later i had the gray i wanted then sealed them. Turned out perfect. I'll attach a picture with 3 of the chair legs refinished and one with the factory finish so you can see the difference. Took a few hours to do, but beats paying hundreds per chair to match the table.

We purchased a set of 2 of these chairs to see how we liked them. Assembly went pretty well, and my husband was able to knock off the little plastic disks on the bottom of the legs. We replaced them with those felt furniture pads instead. These have worked well with our hardwood floors. The chairs are very comfortable, and this was a priority for us. They look pretty cute, too. As soon as the chairs arrived, I started looking on Amazon for some type of cover to protect the fabric. I have not purchased one yet. I think if you want to get a slipcover, be sure to read the reviews to make sure you aren't getting something too bulky. Also, note how the back of the chair "curls" back a bit at the top, so that may impact how the slipcover fits. After trying out the chairs for over a month, we decided to get a set of 2 more. These also came in good condition- pretty consistent with the other set. The only thing is one of the chairs was a little harder to assemble because the holes didn't completely align. However, it was resolved and all the chairs are working well. We drape something over the bottom of the chairs if we are worried about spills. I am not sure how well stains would wash out. Before we bought these chairs, we tried out chairs in different furniture stores. We found many others pretty pricey or not that comfortable. They arrived quickly and in good condition. Just give them a day or so to out gas first.

I bought the tan ones, and to my surprise they are actualy made on USA. The chairs are solid wood, decent built, easy to assemble ( took me 10 minutes to put two of them together, and I'm a woman). The fabric has a shiny silky appearance and the texture is elegant. The seat is comfortable. I have not use them for dinning (mine are just for the look) so I can't say how well they hold, but for the price this is a good buy. The color is more of an dirty white than tan. I attached few pictures to compare with a white notebook(top) and a cream valance (left), also I set the chair against a standard white cabinet for color comparison. I wish they had this chairs in cream or white, but the dirty white works well with my white furniture. The legs have a white glaze on that gives the white wash appearance. I will paint the legs white without sanding (hope that's not a problem).Overall this are nice chairs for a reasonable price.

Great quality and fast delivery! Love the look of these chairs.

They are good chairs for the price we paid. I bought 3 sets of two (6 chairs). The high back is super nice, the color is true to the photos. I'm happy with the chairs for the most part, only thing is two of the chair are wobbly. It seem one leg is a bit short than the rest, but im resourceful so I fixed it. They are nice chairs!

To be honest I didn't think the chairs would be this great! 1. Chair is solid 2. Great color 3. Comfortable seat. For the price it's an excellent purchase. Very easy to assemble, you can't make a mistake.

I don’t typically write reviews, however for the price these chairs are very good! Very sturdy, nice colour, and easy to assemble. I would purchase again.

I ordered 3 sets of 2 chairs totalling 6. All were manufactured in Vietnam and not the greatest quality. 4 chairs had matching grey fabric but 2 are noticeably different grey. Received hardware for 2 chairs that was completely wrong. Packages included note from Roundhill Furniture to reach out directly for any issues. Contacted them about incorrect hardware but they refused to assist as I'm located outside their service area! The bolts are very hard to find in Canada so I still have 2 chairs in pieces! Don't buy these, they are a huge headache!!!