Ricoh SP 101S Original Laser Printer Toner Refill Pouch (Black)

This is a really good product.I used it to refill my SP100SF also bought from amazon.The toner is easy to refill and very cost effective.however, you have to be careful while refilling as this is very fine and flys with the slightest amount of wind.Read the instructions on the pack, and the printer manual.You can also watch videos on youtube.Inhaling toner is bad for lungs so keep a cloth over your nose.Have a funnel handy to pour the powder into the small opening.There are two holes on the cartridge, one is to remove the used toner and the other is to fill the new toner. read the printer manual.Procedure in short:Open both the drain hole and the fill hole and let out the used toner keep shaking to remove all of it (there is quite a bit of this so have some container handy).close the drain hole and start filling the toner in the fill hole. keep shaking the cartridge after pouring small amounts so it spreads out evenly. (i didnt do this and had the funnel blocked and lost some toner on shaking with a funnel full of toner.)close the fill hole and put the cartridge back after shaking it horizontally a few times.Overall satisfied with it.Refilling is better for the environment as less cartridges are thrown into the dump :)so always try to refill. Original toner by Ricoh is a very good idea. I wish every company starts doing the same.

Goood quality original product

Original RICOH product. Easy to refill and print quality very good. Simple cone made of hard glossy paper was helpful to refill without much spillage or spread. Item content is made in Japan and packaged in China.The price is very high as RICOH official price is Rs 504 + 18% GST. Which is about Rs 600, but I paid Rs 827 + Rs 10 delivery charge.Unfortunately, this was the only original pack seller on Amazon though there are several compatible powder available for one third the price.

If you want the best quality prints, go for this original toner powder. But it is expensive at ₹514 for 80g because 100g after-market powder is locally available for ₹150, considering after-market powder gives 90% quality of the original powder.Also,-make sure you remove old toner powder with vacuum cleaner for best results.-avoid mixing old & new or different brand toner powders.-never run the toner dry as it can damage the drum.-do not expose drum to bright light while refilling.-keep fan off while refilling and try to cover nose & mouth as the powder is poisonous.

Restores the darkness of my printouts to original levels at 100% compliance to quality. In good old days, this costed around 300/-... But even at current price band, it is worth every penny. My printer ? Ricoh SP-100. What IS a pain in the butt is the re-filling procedure... You GOT TO HAVE, a funnel (real or "jugaad"), disposable gloves and ideally, a respirator (face mask), because the product is a black coloured powder that is SUUUUUUPER FINE, so it just literally floats in air at the slightest whiff of a breeze. SO MAKE SURE YOU REFILL IN AN ABSOLUTELY STILL ENVIRONMENT.... no fans, no aircon, no breeze at all. I prefer to do it in the balcony so that even if it does go up, it does not mess up that much. Each refill lasts easily around 1500 pages, assuming standard coverage... If you use only graphics, then OBVIOUSLY, you need to almost half this.I WOULD LIKE MANUFACTURER TO INCLUDE A FUNNEL + GLOVES