Hammond 1591BSBK ABS Project Box Black

Great little box for containing any little project you may have! And it's plastic so you can drill and make customizations to it without alot of trouble. I used to it encase an Arduino Uno and a sensor, by putting standoffs on Uno and gluing them to the bottom of the box. Works great. Perfect size for the Uno

I used this to house a 12V timer I am using to control a livewell aerator. I originally used a slightly smaller Hammond box but the board didnt fit quite right due to the internal screw posts. The timer fits great inside this one with room for the wires on both ends of the board. GERI Newer Version 12V Multifunction Relay Cycle Timer Module - Programmable with Customized Settings (Increased to 18 Modes)

Great "little" gate! So much easier to step over! I'm 5'2" and that's my knee at top of gate. Serves my purpose as my older dog has developed bladder issues and I didn't want to be able to get in our bed anymore. 5 minute installation.

First off, ignore the picture's dimensions, just read the product description. Secondly, the product description is for outside dimensions, you loose about 1/4" on the inside. I purchased this box, and it satisfy my needs. The reason this isn't getting a 5 star review is because one of the 4 sides near where it connects was slightly damaged. Because of this, the lid does not sit on the box flat. Once the screws are on though, it is fine. This is an empty ABS box, and if you want one of these, I still recommend it.

I was assisting a neighbor on installing a video doorbell longstory short. I utilized this product. It was affordable and I've had no problems with it. And when I hesitate buying from the seller or this brand again.

We've had the same buttons to open the garage doors for about 30 years but they've gradually fallen apart and needed to be replaced. I used this box for the base to hold two of these buttons Momentary Push...

Used these in a small electronics project. Dimensions exactly as described. Good fit and finish. Drillable, cuttable (plastic can be a little brittle). Overall, nice boxes.

The box seems that it will work for many applications, the problem was that the interior space is not the same as the listed dimensions. The holes for the screws made it too small for the card I needed to house in it. It should have come with internal and external dimensions. The inside of this one was 3.5" by 1.5" instead of the advertised 4.4" by 2.4". If you need this for a specific project (or any of this family of boxes) and space is an issue, order at least 1" bigger than you need for the corners. More specifically the box I ordered wouldn't fit an Arduino Mega, and the advertised dimensions should have fit it.