OnStage On-Stage KS7191 Classic Double-X Keyboard Stand

I needed a stand for a 76 key Yamaha keyboard that weighs under 15 pounds and this On-Stage X model popped up during an internet search. I am not a professional hauling it to gigs, but I appreciate that it is portable and collapses for storage. The stand has a weight capacity of 90 pounds. There are five height adjustments from 27 to 38 inches easily attained by using the pull knob to release and then secure the pin into one of the holes in the disk. I did this without the keyboard in place.Assembly is simple, the X section is already in one-piece so just the bottom and top arms need to be attached to it using the included Allen wrench. The wrench is stored on a square shaped washer that fits over one of the legs so it is always nearby whenever needed. The screws are partially attached in the end of each leg, so use the wrench to remove, position the proper arm in the correct direction, replace the screw and use the wrench to secure in place.It is wise to look at the instructions because although basic, assembly is not intuitive. First face the X with the height-adjustment knob facing forward (toward the player.) Then attach the arms but note both the longer bottom arms that rest on the floor along with the shorter arms that support the keyboard have a long and short side. .For structural stability the bottom arms should be installed with the short side facing the player and the top arms should have the short side away from the player, behind the keyboard. Then the keyboard simply rests on the rubbery sleeves on the ends of the top arms, and although my initial placement was wobbly, I moved it until it was level and it is doing an excellent job supporting the instrument. Parts are available on the website. Page down on the lower right side under support and have the stand’s model number handy to locate parts quickly. An economical and functional solution.

This stand is perfect for my Costco bought EX10 keyboard. It was easy to put together and the keyboard fits perfectly. Al the hardware was included and it sits flat.

The product is what I expected. Most important: good quality and light. It's easy to assemble and it's practical.

I mean, it's a cheap keyboard stand. It's easy to assemble, sturdy, portable, and does the job. What more did you want?Oh... Fair warning: Never try to adjust the stand height with a keyboard on it. It *WILL* go very badly no matter how careful or capable you think you are.

Got this for my GF for her Casio keyboard. Arrived in two days, put together in 10 minutes. It is solid and holds the keyboard well. Height is quickly and easily adjustable with a convenient spring loaded quick-release pin.Very reasonable price. Folks that have reported issues with the legs being different lengths did not read the directions, holes in the base and top pieces are off-set to account for the legs crossing. Top and bottom pieces are different lengths. Longer on bottom to provide better base support. I know it goes against human nature but read the directions...I won't tell, nobody needs to know you did:)

I put my cumbersome Yamaha YPG-235 on this for use at home. The stand is plenty sturdy, at least on my floors, and adjusts to the right height for me (I am short). Make sure you read the assembly instructions carefully, because assembling it isn't what I would describe as intuitive. It is very easy to put one of the pieces on wrong and end up with a wobbly stand.Note that the screws come screwed into the ends of the legs, so if you're having trouble locating the screws, look there. My only problem with assembling this is that one of the screws was in the leg so tight that I had to whack the included hex key with a hammer in order to loosen the screw. However, aside from that, it went together easily and was fully operational within a few minutes.

Purchased this stand with my Casio PX-330. As long as you pay attention to which leg attaches where, assembly is a breeze with the included wrench.Stand adjusts easily, although I would recommend taking the keyboard OFF when you adjust the height, I almost dumped mine on the floor.I'd like this stand to go down a tad lower for use with my computer chair, but it does go low enough to be used in most chairs.At full height it can be a bit unstable on a carpeted floor, but on a hard floor you shouldn't see too much wobble if you're just playing.Overall a great buy. This stand is for someone who just wants something to put their keyboard on without spending a lot, and for that it does it's job perfectly.

This stand is sturdy enough but, as I am very short, it does not adjust down far enough, making it hard for me to reach the keys and I have to put cushions on the bench. The X design also makes it hard to get my legs under the stand. I do not recommend this design for serious players. Eventually I will replace with the table design.

Es para el teclado de mi hermano muy bueno

Very affordable and it’s easy to adjust for height. Good and sturdy. Came with easy to follow instructions and the tool needed.

Despite being a lightweight stand it is still sturdy and solid - my keyboard weighs 25lb but the still feels steady safe and secure. I particularly liked the locking mechanism, which was very positive so no danger of a collapse. I did have a minor problem putting it up. The instructions do not designate an orientation but my first attempt resulted in a wobbly stand. So I changed the pieces round and was rewarded with this lightweight but steady stand. Am very pleased. Now whether the orientation matters or whether my first attempt was not seated correctly, I do not know but all is well now.

I am very pleased with the product and have had no issues. The stand is easy to use and set up right out of the box. Build quality is solid. The piano does not slide or wobble while playing the way it can with other stands. Height is easily adjustable, no tools required, and can also be fully folded down for storage or travel. Definitely worth the $34.99 I paid.I use the stand with a Casio PX-350 (~25lbs) on a carpeted floor.

The stand for piano is good. Assmbly manual was also inside package. Noissue in assemblying. My digital keyboard os good enogh for standing on thos model.