8 PCS Replacement Spare Food Grade Silicone (Better Than Rubber) Gasket Seal Ring For Aluminium Stovetop Coffee Maker Pots 12 Cups

I bought a vintage 6 cup Stella Moka pot from an antique shop in Italy that had a disintegrating gasket. This product was the closest fit I could find so I took a chance. The fit was perfect! No gaps, no leaks, and my Moka works perfectly!

My Moka pot needed a new gasket and after measuring in mm i found the exact size . Very satisfied in this purchase.

Perfect, make sure to measure your espresso pot to insure the right fit

My old/classic Moka express stopped brewing. It still would not work after replacing the rubber gasket with a brand new Bialetti spare. I decided to replace the old funnel filter as well, as it was a bit bent, which improved somewhat but that did not fully solve the problem. Only after I installed the silicone gasket, the coffee started to brew/flow again. Seals and works great now.

First off, it works and it is very unlikely you’ll use all eight unless you have 8 moka pots. The thickness is the same as the original. The diameter is a little off though. The inside and outside diameters are looser than the original so it jiggles when you shake it. That doesn’t seem to affect the performance though. The silicon makes a great seal and the pot works as well or better since it stays pliable.

I left my classic aluminum 3-cup Moka Pot on the burner for like half an hour on high, which turned the coffee into lava and the rubber ring into an oozing sticky mess. I thought it was a total loss, but amazingly enough I was able to boil the coffee out, and a solid half-hour of cleaning with Goo-Gone removed the ring mess. But now, no ring. I was going to buy a 3-pack of replacement rubber rings, but I saw this when I looked around. I figured, no big loss, so I ordered this. WOW! Great replacement. First, no rubber smell at all of course (they're silicone). Second, they're slightly thicker than the rubber rings but they seat really well and I think the two halves of the pot are slightly easier to separate after making coffee. Third, they're just a hair smaller (and thicker) so they easily pop out when I'm cleaning the grounds strainer, with the result is that it is _much_ easier to clean. I also bought a 4-cup Moka Pot Induction, and the first thing I did was put in one of these rings. HIGHLY RECOMMENDED, even if you don't need a new rubber ring yet.

this seems promising - I have 2 Bialetti MOKA Express pots - one is a 3-cup and one is a 6-cup. I ordered 2 different sizes of the silicone gaskets and both sets arrived same day and even though packaging says 3-cup and 6-cup respectively they are unfortunately identical in size. Both of them are 3-cup dimensions. But the 6-cup should be wider diameter as per specs for pot and as they listed in description for this product. I am guessing someone made a mistake and put the wrong size in the wrong package which is annoying for me to now have to deal with return - not sure if this mistake is for an entire batch that Amazon has or just a one of error… otherwise they seem better than the original rubber gaskets that disintegrate over time. Hoping the silicone version holds up better once they send me the correct size.

Absolutely perfect fit and seal for my 6 cup Bialetti Mocha Express. These silicon gaskets are extremely durable..... I have had one in my other Bialetti for 6 years and it is still almost like the day it was put in. Also SO much easier to unscrew the pot with these instead of the rubber gaskets. Only wish i could buy one or two..... at least 6 of these will probably go to the grave with me !

Fit my Bialetti Brikka 4 cups perfectly

Better than the original gaskets. Tight fit for a good seal! I will buy again. I have a 6 cup Musa and the gasket fits perfectly.

Excellent quality, it fits perfectly in my Bialetti moka pot (both in diameter and thickness). In fact, I was quite impressed with it! I recommend it.

It's thicker than the original gasket for my Sara Moka pot and just slightly larger. I can't tighten the top and bottom enough to prevent leakage while brewing. Make sure you check ALL the dimensions carefully! Other than that, these look well-made and should last a long time in the right pot.

This gasket replaces the old gasket that Isla wants $50 for 3. My model is the brushed stainless steel now branded as a Cuisinox Milano Satin Espresso Maker. The replacement gaskets seem to be better quality and doubtfully will get that nasty smell the original gasket currently has acquired over several years. Thanks for making this replacement gasket available at a fair price. The dimensions of the gasket I purchased was 55mm ID 75mm OD. Although I think the ID is really 54mm, it fits perfectly in the coffee maker. The only downside compared to OEM is it’s a bit tricky to get out and clean. However, I think the pros far outweigh the cons.