Antrader 2-inch x 0.9-inch Non-Mortise Antique Hinge, Vintage Furniture Cabinet Hinge with Screws, Black, Pack of 12

Good deal at a fair price

For our cabinet doors, these hinges needed the magnetic cabinet attachments to close tight. Once installed everything works great.

Screws are great. Made a cabinet for the bathroom and used these for the flush doors. Great hinges.

Fast shipping, honest seller. So far no problems. thank you

The screws and hinges are very cheaply made. I drilled pilot holes that were slightly larger than the main shaft so that only the threads were touching the wood and I sheared threes screwheads off while driving with a screwdriver. Several of the screw holes in the hinges were manufactured too large so the screwheads slipped right through. Of the 12 hinges, the holes were the right size to secure the hinge to the wood on only four hinges, but then the hinge wouldn't close all the way, so the door was slightly ajar. Moreover, if that wasn't annoying enough, while I was taking the hinges off for adjustment, the screwheads managed to slip through the holes on the hinges before I was able to get them off. So, after several shafts embedded in the wood that I have to figure out how to remove (by damaging my project that I've spent countless hours working on) or work around, I am getting different set of hinges that actually work. These hinges are a sad excuse for a hinge, they're more like flimsy sheet metal with a wire in it held on to the wood with toothpicks.

Screw heads broke off even when I predrilled oversize. throw the screws away or you will need to start over. The counter sinks are off center as well. The screws even broke off trying to remove them. Aluminum screws??

Was looking for the same hinges to replace the ones that broke on our Amish kitchen trash can after 3 years of usage. They were the exact replacement; the big box stores didn’t carry them.

Hard to find this type of hinge in this size but here they are. Unfortunately half of the pack were sort of bent on the hinge pin (not removable hinge pin) side. I was still able to make most of them work with adjusting how I installed them, but if your looking for straight lines and a super clean finish these will be a challenge.