FFtopu iPhone 6 Screen Replacement White, LCD Display & Touch Screen Digitizer Frame Assembly Set with Repair Tools for A1549, A1586, A1589 (4.7 inch)

Fit great and easy to install. Great strength and clear screen

Screen works great. When I ordered it I misread a few things and didn't realize that I had to transfer parts from my old screen. Other than that I am satisfied with the quality of this screen

While replacing the battery in our old iPhone 6 I jacked up the screen so I bought this replacement. Works great, very cost effective. Resolution is good, refresh rate etc is definitely not stock but usable. They include some nice micro tools to aid the process but I found I needed more tweezers, pins and hand tools to get the job done. It took me a little over an hour with no prior experience. Went very slow and tracked all the screws and parts for reassembly. You need to be very patient and careful. You must remove the home button and camera/sensor assembly from your old screen and attach it to the new screen. I found the process very relaxing actually. The bezel of the replacement screen doesn’t sit quite as flush as the OEM screen but it’s not a problem. I had an adhesive ‘gasket’ to out on the phone frame to seal in the new screen. That was extremely tedious to apply but gives is a professional finish. That seal came with a battery kit I bought, not this kit unfortunately. If you’re bothering with this, just get both and do at the same time. Cheers!!!

Came in handy

This is the fourth time that I’ve replaced an iPhone screen. Not that I’m clumsy or anything :-). However, this was the trickiest time. Previously I had paid more attention to what I was buying , and I bought screens that I didn’t have to move anything over from my old screen. Since you need to move so much from your old screen, what normally would’ve taken me 20 minutes to do took me about an hour and a half this time. I also have a hard time with looking things up, and watching videos of things. So I ended up Just using my past experience and paying attention to what I was taking off and how. It worked out well. I only lost one screw, but it still works OK. However, if you’re new to this, there are easier options out there. But, those options aren’t as inexpensive 😉

I got this screen because it was one of the cheapest ones with prime, and I would get here the soonest.I didn’t read the whole description, but this only comes with the screen, and the glass. I had to transfer the earpiece, metal back, with the cable to the new screen. With the time I spent doing that, I wish I would have paid the extra $$ more to get one that came with the camera. As that was something that I could have messed up if I did it wrong.The screen looks good. This is my 3rd replacement on this phone. The other 2 were different screens. The first one I got had a bad digitizer, and war very blue looking, the 2nd seems like factory, but came unglued until it stopped working. I’m about to retire my iPhone 6, so I went to this screen. The performance of it seems to be close to factory. Except there is a area ther is darker with a blue tint. Not that bad though :)

I did the whole handiwork for my brother. I followed a quick and easy tutorial and it worked like a charm. HOWEVER. You know there’s always the however :). It was a real pain to set the screen down into the casing of the phone which is literally the last part before screwing in the two bottom screws next to the charging port. Im not sure how my brother did it because I got tired of trying it but he did after countless (hammering noises) might sound odd but I wasn’t really watching him do it but I’m just gonna assume he used a lot of brute force to get it in there. I recommend getting this aside from this little problem mainly because the metal body was scuffed and chipped from dropping it too many times maybe that’s the reason.

No instructions I was a bit confused but it worked! Phone works! I had to take parts from the old phone the home button and the front camera. Good thing those weren’t damaged.

Was fairly easy to install. Arrived on time.

あたりを引いても値段なりなんかパーツが足りてない気がします。スピーカーの網が無かったりカメラの枠がなかったり

ゴーストタッチに悩まされて交換。動作は問題なし。インカメの付け替えが面倒。

交換後に変な筋やモアレが出ることもなく、特に問題なく使えています。もともと落としたりしてデバイスが歪んでいたので画面は浮いちゃいましたがこの製品のせいではないと思います。

元々、画面の一部が破損していたので、スクリーンのタッチが認識されにくいという問題があったなどの問題を解決する上で選択、そもそもあと1年使えば4年使用することになるため、それを踏まえても機能の問題上妥協するとしたら丁度いい。しかし、タッチIDが使えなくなったことは深刻な弊害ではあるため、多くのパスワードが失われたのは痛手ではあるが、どうせ今後使用しないだろうモノが多いこともあり、あきらめがついた。