Deliver to GERMANY
IFor best experience Get the App
🚀 Lift your truck, lift your status.
The KSP 3in Level Lift Kit is a precision-engineered front strut spacer designed for 2004-2025 F150s, 2003-2018 Expeditions, and 2005-2008 Mark LTs. Made from aircraft-grade forged aluminum with anodized finish and secured by 12.9 grade bolts, it raises your truck’s front by 3 inches, enhancing ground clearance and aggressive stance. Easy to install within 1-2 hours without special tools, it ensures durability and safety even in extreme conditions, backed by a 30-day refund and 12-month replacement warranty.
Brand | KSP PERFORMANCE |
Auto Part Position | Front |
Material | Aluminum |
Included Components | Strut Spacer |
Manufacturer | Goldenlion |
UPC | 704693077225 761330255989 |
Automotive Fit Type | Vehicle Specific Fit |
Maximum Lifting Height | 3 Inches |
Model | 3“ suspension lift kits for F150 |
Item Weight | 6.3 pounds |
Product Dimensions | 6.3 x 6.3 x 5.1 inches |
Country of Origin | China |
Item model number | SUVELAM |
Is Discontinued By Manufacturer | No |
Exterior | Anodized |
Manufacturer Part Number | 21LF8201 |
Special Features | 12.9 Degree Bolts, Forged, Compared with others, our products lock better. Because we added gaskets and spring washers |
D**D
Great quality
Great quality easy to install I installed the upper control arms also
G**I
They fit perfect
It was just what I was looking for
C**Y
Would recommend but advise new UCA
Product is pretty straight forward. It works as intended and wasn’t too bad to install. I have the 2.5” puck. Rides great, looks great and is affordable.Aligning it was difficult. I’m right at the edge of where it’s not going to wear the tires unevenly. On the machine, it’s a little off. That being said, I would recommended getting UCA’s to play it safe. It will correct the angle of the ball joint and allow for a better alignment
S**S
Great Product, Best bang for your buck.
It took me 3 hours to install this. Just a suggestion - you will need the help of your favorite beer of choice and just about every cuss word in the book, however, for 60 bucks, great product. It did exactly what I needed it to do. My 2019 f150 stx with a 5.0 V8 still sat "not leveled" with a (2-1/4" level) / (2.5" level) (can't remember what I put in first) and this did it perfect, my front end sits a 1/4" higher than the rear which is the look I was going for. My cab sits level, and its the perfect look with 35's. (Panties drop every time I drive by and let the straight pipes eat) On a serious note, you will need 2 people to install this, one with a pry bar straining the piss outta your stock suspension just so you can get the strut out, and go ahead and pray to Jesus you can get the thing back in there with an extra 2.5" on the top of it. Make sure you don't over tighten bolts anywhere when putting it on, and be sure to disconnect brake system and the biggest issue was the 4wd. At least on the f150's they are vacuum sealed, unlike the 250's and 1 tons, and you have to take a nut off of a bolt behind the dust cap in the center of the hub in order to slide 4wd off. Once you free everything up, have fun, turn some wrenches, and learn a thing or two!!I'm not sure if I can edit a review, but I will add photos if I can,Thanks for taking the time to read!
K**M
Right height increase Updated
Bought these over the 2” lift due to running a bed cover and bed sliding tray so the back is lower than an empty. Install is a pain, so do it when you need new shocks. The product itself is easy to add on. Hardware is good quality etc. The reason this is not a 5 star is one of the holes for mounting to the shock was not in perfect alignment. Result was difficulty getting a socket on the nut to tighten it down. I had to tap the socket on the with a hammer and then slowly tap it off when it was torqued. If I could have I would have returned the product, but one side was completed and the thought of pulling it apart to return wasn’t much of an option.Update: Seller contacted me with a full refund. Great customer service!
J**R
It was placed perfectly
Awesome 😎
T**S
Leveled out within 1/2 " of rear
Application was a 2020 F 150 4x4, 4 door with 6.5' bed... This item was 1 5/8" thick and was exactly what was needed to compensate for the leveling I needed. I bought the truck with a 1 3/8" leveling block kit already installed but the front and rear were at least 1.5" different. I knew the geometry may solve the problem with the extra 1/4", and IT DID. Solid product, no complaints for install. Had it realigned afterward but no evidence that was needed.
J**E
2019 F150 2 inch level
Perfectly Leveled my 2019 F150 with hand tools and a jack/jack stands.This took me about 5 hours but I think it would have taken 3 if I had not run into a few issues. First, my sway bar links did not want to cooperate and I fumbled with those a good 2 hours. Ended up needing to replace them. Second, I did the method where I dropped the lower control arm by its two bolts. Super east, drop those bolts and the tie rod end and its super easy. Very easy to get back together as well. Never disconnected the ball joint or the axel. No need to. My second issue was the second lower control arm didnt want to go back into place but eventually did. Other than those two minor issues this was really easy. Hardest part was finding an 18mm socket and a thin 18mm wrench for the new moog sway bar links. Highly recommend this. Very easy to do if you have some know how and the tools.My f150 looks so much better leveled. It made a huge difference and wish I had done it sooner.
Trustpilot
3 weeks ago
4 days ago