Next Level Racing ERS3 Elite Series Reclining Seat (NLR-E050)

This seat is a major step up from the GT Racing seat I use on my other rig.It's wider and so much more comfortable.The seat adjustment points are easy to access. It works very well in the Next Level Racing Elite Rig.My only complaint in that the rear mount points are a bit if a tight fit which makes bolt installation and tightening a little harder than normal.I've spent more than 4 hours on this seat with no pressure points. I'm 6', 210lbs.

good for big boys, i am 6'4 and 250lbs. albeit it firm, its big and comfortable. not sure id recommend it for anyone who is particularly small framed or for a motion rig. but solid for a fixed frame set up.

This is a great sim seat AFTER you get it installed. The instructions say to move it all the way forward on the sliders to get to the bolt holes in the back. Problem was they wouldn't slide all the way back! The bolt that holds the slider to the seat stopped the slider from moving. I thought it was not screwed all the way in but it was tight. The other side actually slid an additional 2 inches before hitting the bolt. Neither side went beyond the seat bottom (3-4 inches short). The front was better but still a little short of reaching all the way according to the illustration. This made matching the bolts with the t-nuts extremely difficult if not impossible. I used a tip from a Youtube video and put the t-nuts on before sliding into channels of extrusions. Then I spent an hour tightening the bolts 30 degrees at a time. (again the front was easier) All told assembly was increased by at least a couple of hours because the sliders did not go far enough in either direction. I also waited until the end to attach the seat back. It's the first step in the instructions but I didn't see the need to deal with the additional weight while maneavering the seat onto the frame. Like I said after installation the seat is great, but I wouldn't want to go through that again. To be fair, I did not contact customer support. Not sure what they could do except send some parts or replace the seat and I didn't want to wait.

High quality Sim racing seat. Unfortunately, it does not come with brackets. However, I knew this so I’m not going to let it impact my rating.

Extremely comfortable and exceeded expectations. Compared to my oldExtreme Sim Racing Comfort XL this seat is much more robust and the dual recliner levers makes the back much more rigid which has minimal flex with load cell pedals. Easy to get into and out of as well. Buy with confidence!

The media could not be loaded. Missing a complete backside seat cushion leaving one side deflated and wrinkled with ZERO support. That same side is bent outwards and sticks out further than the other side. Looking straight on the whole lower seat seems twisted like it’s an actual car seat pulled out from an accident, that’s what I should have bought for $20 it’d be better than this. Loose threads, uneven as can be don’t go by the A.I. pics shown ^ that’s not what they look like. I was excited too

I love my chair it’s so comfortable and fits perfectly with my next level racing rig

I purchased a gt omega art cockpit and seats were not available, this was the next best thing, it works good, seems built well and is comfortable for a racing seat.