NETGEAR Wireless Access Point (WAX615) - WiFi 6 Dual-Band AX3000 Speed | Up to 256 Client Devices | 1 x 2.5G Ethernet LAN Port | 802.11ax | Insight Remote Management | PoE+ or Optional Power Adapter

this is the second WAX6 10 I have purchased. I was so impressed with the ease and proformance of the first unit I brought the second unit to add my wifi coverage down my garden into my home office. I was amazed how simple it was to link the two units and have a seamless wifi connection in my house and now into my home voice. Both units are connected via cat6e and though the app - I just confirmed the registration and app did the rest.

Very easy to configure and delivers great speed and reliability in heavily congested wifi areas. I bought it because the entire block of flats where I live is full of 2.4 and 5GHZ networks and coverage and quality was really poor. With this new tri-band AP benefiting from the not yet popular 6Ghz band I achieved great coverage and speed on Wifi 6E. But even Wifi 6 (which goes on 5Ghz) delivered better speeds and quality than my previous 5Ghz router that was NOT Wifi 6. My phone (Galaxy S22 ultra) was already Wifi 6E ready but for my laptops I had to buy new Wifi 6E cards.All-in-all well worth the price. I just hope others will not read my review and neighbours stay off th 6Ghz band :P

Overall I’m happy. I fitted 4 around my house. Speeds aren’t the same on all of them - 3 are super fast but one is quite slow but that might be due to cabling. You can’t use any Netgear app to configure these and that’s a big negative. If I had my time again I’d get the WAX214 instead. That said, they were easy enough to configure.

Setup 2 of these in a HMO of 6 rooms. Easy to install, with great features such as load balancing, and fast switching between the 2 APs

September 2023 Update:Sadly, I've had to return this for a refund due to what I believe is a software issue and a lack of being able to contact Netgear. Two firmware upgrades ago, I noticed that the 5Ghz band kept turning off even though I hadn't changed any settings since I did the initial setup. Rebooting the AP didn't fix it, but surprisingly, toggling (e.g. on to off then on again) some extra settings (such as the WMM toggles) would bring back the 5Ghz band... until the last device disconnected, at least. I tried to open a support case with Netgear, but all I received was a "somethingWentWrong" error message, and their chatbot just told me that there were no representatives available (at 1pm UK). I contacted Amazon support, and even they couldn't get through to Netgear, so they gave me the option to return for a refund. Given the issues I've had with this, and the lack of working support, I cannot recommend Netgear, especially if they're charging this much.Original Review:Initial setup was a pain as unchecking the built-in DHCP server would cause the access point to freeze during setup. I then left all settings as default (except passwords) which got me through initial setup but again, trying to disable the DHCP server would freeze it. I tried to search for updates but it claimed it couldn't connect (despite other features and even clients working). I had to manually update it to the latest firmware which did fix my configuration issues at least.Mounting it on the roof was fairly straightforward but whoever designed the space for the ethernet cable was clearly not thinking with compatibility in mind. You'll need a flat ethernet cable with as small a connector as possible otherwise it'll not fit and/or damage the AP and cable. The space is just too small and really shouldn't be where it is.I did some initial tests before mounting it to make sure it worked but then fully tested it after installing it. Internet download speed was as expected at 1 Gbps and internal iperf3 tests showed slightly faster (connected via 2.5Gbe). It wasn't until I started to take steps back that I noticed the speeds drop massively. Overall connection quality is great but as soon as you add a few metres the speeds will drop as low as a quarter.I kept it because I had already mounted it, but I'd probably look elsewhere due to the speeds. If speed wasn't of concern then this provides signal to the entire house.

This is a good access point and easily covering a three bedroom house, I have turned down the radio power from 100% to 50% and it still working strong (second Floor).The only problem with this device is when it’s factory reset, it will always attempt to connect to Netgear Cloud management, this will cause the Zero Day (Web GUI) to act strange and ignore applied settings if it’s connected into Netgear Cloud previously.Workaround is simple, configure this device not connected to the internet and it will behave and work locally, I assigned a static IP via MAC address on router and then blocked the IP from outbound connections.Once it’s configured it’s fine and rebooting is also fine, just initial setup could be a pain.

A great, quality AP that is fast, meshes, works well on PoE and handles a lot of clients in a crowded spectrum.I now installed lots of these - no problems at all. Particularly good if you use the Netgear Insight environment (free 1st year with product) - it makes network management a doddle.

The product works fine in proximity. Has some nice features but does not nearly cover as much area as specified. Should cover 300mp, barely covers 50 in a small end of terrace, with the signal dropping altogether sometimes. It’s “meh” at most. Definitely not worth the cash. Maybe for an open space business but nothing should interfere with it.

Der NETGEAR WAX625 ist ein leistungsstarker WLAN Access Point, der speziell für kleine bis mittelgroße Unternehmen entwickelt wurde. Dieser Access Point unterstützt Wi-Fi 6, was bedeutet, dass er hohe Geschwindigkeiten und eine bessere Kapazität für mehrere Geräte bietet. Anfangs habe ich mit dem UniFi 6 Pro AP geliebäugelt und die Entscheidung ist mir sehr schwer gefallen. Entweder alles auf Ubiquiti umstellen oder vorhandenes nutzen und erweitern. Ich habe bereits einen GC108 Switch von Netgear mit POE+ und hätte so beide APs verwenden können. Letztlich habe ich mich für den Netgear entschieden, da hier ein 2.5GBit Port plus ein weitere 1 Gbit zum Erweitern am AP selbst vorhanden sind. Damit ist das Teil für mich mehr als Zukunftssicher. Weiterer Grund war die zunehmend schlechter werdende W-Lan Abdeckung der Fritzbox. Bei sehr vielen Fremd-Signalen hatte man in manchen Zimmern kaum noch Empfang. Unser Szenario: Klassische Berliner Altbauwohnung, 5 Zimmer, zentrale Lage des Routers. Mit dem Netger AP habe ich mittlerweile bis in jede letzte Ecke volle Leistung! Sogar auf der Straße vor dem Haus ca. 25m in beide Richtungen ist noch guter Empfang. Einfach mega!Hier einige wichtige Merkmale, die den WAX625 Accespoint auszeichnen: Hervorragende Leistung: Der WAX625 bietet Geschwindigkeiten von bis zu 5.4 Gbps, was bedeutet, dass er mit hohen Datenraten umgehen kann. Quasi ideal für Büros oder Umgebungen, in denen viele Geräte gleichzeitig über W-Lan verbunden sind. Robuste Sicherheit: Der AP bietet WPA3-Verschlüsselung, was eine der sichersten Methoden ist, um das Netzwerk vor unbefugtem Zugriff zu schützen. Darüber hinaus können separate Gastnetzwerke erstellt werden, um die Sicherheit weiter zu erhöhen oder eben getrennte Zugänge zu erstellen. Einfache Verwaltung: Mit der NETGEAR Insight-App kann der AP von überall aus verwaltet werden. Die App bietet eine übersichtliche Benutzeroberfläche und ermöglicht es z.b. Einstellungen anzupassen oder Firmware-Updates durchzuführen und Netzwerkaktivitäten zu überwachen. Natürlich lässt sich der AP auch klassisch über den Browser lokal ohne Cloud-Zwang einrichten. Zuverlässige Abdeckung: Der WAX625 bietet eine sehr große Reichweite, was ihn wie bereits erwähnt ideal für größere Büros oder Altbauwohnungen mit mehreren Zimmern macht. Er kann auch mit anderen NETGEAR Access Points verbunden werden, um so ein Mesh-Netzwerk zu erstellen, um dann eine noch größere Abdeckung zu erreichen.Der NETGEAR WAX625 ist eine ausgezeichnete Wahl für Unternehmen oder anspruchsvolle Benutzer, die hohe Geschwindigkeiten, robuste Sicherheit und einfache Verwaltung suchen. Mit seiner Wi-Fi 6-Technologie und seinen fortschrittlichen Funktionen bietet er ein hervorragendes Preis-Leistungs-Verhältnis und wird sicherlich den Anforderungen moderner Netzwerke gerecht. Ich kann den Accespoint jedem empfehlen. Aktuell ca. 180 EUR und da muss man nicht lange überlegen.

Lo mejor es la unión de ssid entre antenas y su plataforma web de gestión sin duda la volveré a comprar

L’appareil ne se gère à distance via un abonnement payant !!!De même, la gestion mesh ne fonctionne pas.Je vais partir vers TP-Link

ottimo prodotto, facile l’installazione a muro e facilissima la configurazione tramite app, prodotto top

have two at home, as a standalone, they work fine, but not together.now I have them for over one year, the free Insight cloud management expires, I change to local management, since there is no AC for them and the mesh setting only supports in Insight cloud, and they don't support 802.11r. so no seamless roaming, have to switch wifi off and on to connect to the stronger signal, a bit of pain.