Draper Expert 5003 4.5mm 1/4-inch Square Drive Hi-Torq 6-Point Impact Socket

It’s a socket

Done my job, good substantial socket

Used on doing Oil Cooler/Filter housing seals on 60 Mercedes-Benz now, since purchased.Excellent piece of kit. It outlast Snap-On (got this as replacement until Snap-On guarantee replaced broken one). I use this almost daily....Snap On not used yet....

Great quality and very strong, coped well and no visible signs of damage after using it.

I needed a 45mm socket to get the wheel hubs off my trailer. Did the job (with a 3/4” to 1/2” adapter)

3/4" Square drive 46mm Socket Cr-Mo Draper ExpertAs other reviews have mentioned a good quality socket and comes with the retaining pin and O'ring.It has a thick wall, so for some hubs may be too large a diameter. so some dimensions....outside diameter = 67.0 mmFlats are 46.35 to 46.5 so the clearance I would expect..Depth internal Flats = 29mmDepth of recess for 33mm diameter stub = 36mm (29+7)Overall height 63mmWeight = would hurt if it landed on your foot ( overloads my electronic scales.). -- get out the kitchen scales....approx. 765 grams.The finish looks like it is a Black Phosphate finish...not sure.The silver printing does not wipe off with acetone so should be resistant to oil.(Edit - Not surprising as since discovered the writing appears to be laser etched but just enough to remove the black.)to expose silver colour below.)There are no stamped letters/numbers on the.socketRetaining pin diameter 3.96mm, length 36.9mmDo you need all the above? I do not know but just trying to add info which may be useful to a few.Want a Breaker Bar to go with this - I bought this one  Sealey AK7312 1000mm 3/4-inch Square Drive Breaker Bar

3/4 fitting with a breaker bar makes easy work of removing callipers

Thanks