TRQ Front Tie Rod Set Compatible with 2010-2013 Ford Transit Connect

These have worked out really well for my truck. And a whole lot cheaper. I do a lot of maintenance to my truck myself and these fit right on with no problems i put about 15000 miles on these. I would recommend these to anyone.

Tools needed: tie rod tool or 33mm wrench. I used a stubby crescent wrench which worked great. 13mm wrench. 17mm wrench. 22mm socket or wrench. Great product. Mine have been installed for a couple weeks and are holding up well. Alignment is staying true. Ball joints are not pre-greased so be sure to do that. It comes with 2 packets of grease.

Fit to specifications. Will need inner tie rod removal tool to complete jon

Came as expected but the nuts supplied were not good at all, decided to use the OEM nuts instead. Time will tell if the quality holds up over time. The torq YouTube video made it a breeze to install.

This is the second time ive order3d these.they are super quite and last several years. I do not see the point in spending way more money when these work and last. They are easy to use and would buy again.

Worked really good hat is kinda weird it looks crushed but it’s better then my old ones. I removed the adjustment nut that it came with and used the original due to it being cheap and small contact original is a little thicker and same thread size. I also did an alignment and it didn’t have any issues.

Does not fit a 2016 BMW X5 xDrive35i. The outer tie rod does not come with the OE lock nut and the inner tie rod threaded shaft into the steering rack is M18x1.5. The OE is M16x1.5. So, the inner tie rod does not work unless you use a die to make a smaller, which I wouldn’t recommend. This is useless.

I had a slight wobble above 75mph and after some investigating I found my tie rod sets had worn to the point of having some slight movement they shouldn't have. Replacement with these has fixed the issue. I used my longest calipers to measure the size of the original tie rod set once removed in one piece, and set these new replacements to the same measurement. For myself, this has avoided the expense of an alignment as there is no pulling to either side, no adverse movement over bumps and the wobble is gone, your mileage may vary.