Spin Bike Tablet Holder, 360° Rotation iPad Mount Holder for Exercise Bike, Indoor Treadmill, Stationary Bicycle, Tablet Stand Clamp for iPad Mini/Air/Pro and All 4.7-12.9" Devices & Smartphones

I ordered this item for my camera monitor to place on my e-bike. I had wasted money on a few holders that didn't do the job of holding it steady. It fell a few times, luckily not damaging the monitor, but a plastic piece of the molded clamp on the back broke off. I had no way to place it on my handlebars. This product was my last resort, and it was exactly what I needed. I was able to place it exactly how I wanted it, and it holds the monitor tightly even when I go over bumps. Great product, great price.

If you use an iPad for a baby monitor, this thing is super awesome! It took me maybe 3 minutes to install and set it up. It’s not difficult. I didn’t even have to look at the instructions. Totally worth the money and now our iPad is out of our baby’s reach and we have a perfect view of her crib.

This product is made for use in the vehicle or on your exercise equipment. I tested it on my bike mounted to a trainer and also in my truck mounted to the head rest posts. Let’s start with the used on the bike. It held securely and mounted easily to allow for mounting the tablet and watching your favorite streaming service while pedaling and sweating your butt off. I normally do this with my wall mounted tv as my mind’s diversion but I like this much more. It is always right there in eyesight and helps you not focus on the torture you are putting yourself through! The use in the truck was not quite as desirable. It did fasten to the headrest post but not securely. I believe the insert still did not accommodate the small diameter of the headrest post sufficiently enough to hold secure. It would sag and swing with truck movement. I am sure the use of foam rubber would have assisted but I am not reviewing my solutions. Overall, I am happy with the usefulness on my exercise equipment although the term universal does not quite fit due to the being now way it would have mounted on the treadmill’s bars that have foam and a large diameter. It did mount solid on my bike’s bars. The usefulness in vehicles is still suspect but may be just due to the diameter of my headrest posts and be fine in other vehicles. Pros: - On the right diameters mounts snugly - decent range of motion to adjust angles - the inserts have a place to “lock” into so you don’t have to fumble when using those for mounting (see pics) - good price for quality Cons: - range of diameters that it will work with is far from universal - tightening the head adjustment is difficult Overall a good buy and mostly functional. It has earned a permanent place on my trainer bike.

⭐️⭐️⭐️⭐️⭐️ I am VERY satisfied with this simple but effective device holder. It’s easy to attach to a variety of handlebar thicknesses, can hold several differently -sized devices, from large and small (including a tiny Apple TV remote control!), and is easy to orient to a lot of different angles - and holds them securely. It’s actually plenty study, too! I admit that I was skeptical when ordering this product, but now I couldn’t be happier - especially for the price!

First, this is an amazing attachment to have for a stationary bike. It does in fact hold most phones and tablets, as described, but there's a catch that's easy to overlook that allows it to hold bigger devices. That said, attaching the nut that holds the phone holder itself is hard to do, because the space to maneuver it is very restricted. And that frequently loosens up, so it's always a little loose and you have to tighten it every 2 or 3 weeks. You definitely want to add a lock washer, but I'm not sure that will solve the problem. Still, I don't want to discourage you from buying this, or something like it. I use it every day and it makes an otherwise boring routine work for me. I just wish the company could improve the way it tightens up.

So easy to fix to our stationary bike handlebar; stays in place, easy to adjust - and (especially useful for me in the midst of several hand surgeries, quite doable with one hand! Price is right as well.

This is an excellent, well-engineered iPad and phone holder. It works on almost any pole, on tripods and on bike handlebars. It hold the device securely at almost any angle. Like many Chinese products, it is hampered by incomplete instructions written by someone with only a rudimentary understanding of English idiom, (though probably FAR better than my Chinese.) Anyway, the instructions are rather amusing: "...twist the ball to make it tighter, and then it will not downward anymore." But, they get the job done, except for one omission. They do not make it clear that the pole-mount loop must be completely removed by unscrewing it, in order to put it on a pole After it is on a pole, it is tightened by screwing it tighter, i.e. twisting the entire shaft until the loop is tight on the pole. After that, it may be necessary to re-tighten the ball-joint, too.

First, the good - easy to install, went right on the handlebars (I'm using it on my regular bicycle while on a stand during the cold months). Holds the tablet quite well, no wiggling around so reading is fine. Lots of flexibility in positioning the stand once the clamp is on the handlebars - you can put the clamp on out of the way of the shifters and still put the tablet in the desired position to read it. The tablet clamps are also quite good - you don't have to center it in the clamps for it to work. A couple of not so good points. One, I thought from reading the dimensions (at least one set) that the tablet would fit in portrait orientation with the tablet clamps on the top and bottom - it will not. However, the tablet clamps are tight enough to allow you to rotate the tablet to portrait with the clamps on in landscape. Another one is that the handlebar clamp adjusts to smaller bars by inserting a couple of pieces that fill in the gap - but once those fall out (and they do), they're hard to get back into place. The last one is that the threads on the handlebar clamp (how you tighten it) aren't all that sturdy - if you thread it too tight, it will pop back a thread.

The flexibility to mount using the bar loop and tripod plate is awesome. I can easily switch from using it on my indoor cycling trainer rig (trainer app control) to my tripod (for video chats) and back with no issue whatsoever. The clam also works well for my iPhone X and iPadPro 10.5 (both landscape and portrait orientations). It’s working so well that I am likely going to get a 2nd unit so I can have 2 devices mounted for us at one time.

JUBOR bike tablet holder was very easy to install on the bike. We have tried it out with the iPhone, iPad mini and iPad Air 4. The holder was easy to adjust to fit all three. Very pleased with this product.

Muy funcional.

Super facil de instalar, se adapta a varias medidas y formas de colocacion! una muy buena compra!

Holds a tablet securely.