OnStage KSA7500 Universal Second Tier for X-Style Keyboard Stand (for Stacking Keyboards, Electric Pianos, Synths, and Organs, 60 lb Capacity, Adjustable, Nonslip Arms and Feet, Metal, Black)

It took about 4 minutes to set up. Sturdy, sleek, and looks cool. Won't work with other sizes. MAKE SURE you check first.

After looking to replace my 2-tiered stand with a 3-tiered stand and realizing that I was definitely going to lose money doing that, I just happened upon this product. It's On Stage and my stand is actually QuikLok, so I wasn't totally sure if it would work. Plus universal equipment, in my experience, has been universally bad at replicating the quality of a dedicated product.I was very pleasantly surprised though! This extra tier fits very tightly and is extremely sturdy. I saw some bad reviews from people who said it collapsed, but I don't know how that could happen unless the whole stand collapsed or they greatly exceeded the weight limits. It's actually MORE sturdy than the second tier on my stand.And here's the MAJOR benefit: I actually have two 2-tiered stands and a 1-tier stand, all from different manufacturers, and this fits on all 3! That means I can have any configuration of tiers that works for my current setup. This is some of the best money I've spent in a long time. I highly recommend this universal extra tier.WARNING: I ordered two of these and was just about to order a 3rd, when I started looking at the reviews again. As I read them, I realized that there are two different models, and I actually have one of each. I never noticed this because one is on a Z stand and one is on an X stand.It seems that On-Stage, maybe after all the bad reviews, updated their item and kept the same model number. I believe Amazon's photo is of the older version, where the posts connect to the back of the keyboard arms (and probably where the complaints about rust and broken welds come from). The new models connect the posts in the MIDDLE of the keyboard arms (see my photo from another seller). This gives a different experience when it comes to adjusting and how far away the new tier is from the player.I have the back connector on the Z stand and the middle connector on the X stand and that works. If I switch them, the Z stand works okay with the mid connector (a little far away), but the X stand with the back connector does not work at all. The third tier hangs out further than the second, basically in line with tier 1.I still love these. Mine work great in my studio with no problems at all. I'm not sure if I'm going to order my 3rd one from Amazon though since I have no idea what I'll get.

Works good and is sturdy

In the times before COVID, I am on tour 100+ nights a year all over the country. This extension is beyond sturdy and does a great job support my Moog Sub37. A few issues: it isn't perfectly level. Despite reassembly, there is a slight tilt and there's no way to adjust the height of the second tier (just the angle). Honestly though, for the money it's worth it. But, it'd be nice to have some variable height options and a bit more attention to quality control in order for the top tier to be truly level.

This 2nd tier stand is exceptionally good.Pros - Solid construction. The sizzor expanding part that goes into the back of the existing stand tube is a great way to get a very solid connection. (A few said it wobbles. Not so if you tighten it well. The adjustable horizontal telescoping tube is great, especially if you have to adjust from a player who's standing to one who is sitting. It easily lets you decide each time you play. The rubber tube covers to pad the keyboard are thick, and the bottom stops are thick and solid. The adjustable angle screws and teeth are good.Cons - Not really one. The telescoping tube end screws were a bit hard to align, but you only have to do it once, so it's good.Summary: If you need a 2nd tier, this is the one to get. A keeper, and worth the price.

This 2nd Tier is a great unit for mounting a second keyboard above a first one on the X style keyboard stands with the proper diameter tubing sized to accommodate this 2nd Tier. If you adjust it correctly, there is room between the lower and the upper keyboard for lighting and playing. This is a must for practicing or gigging musicians. The 2nd Tier is packaged in a box that you wouldn't believe can house it. Once you open the box, you can see that the unit has a telescoping back strut that is the main strength of this unit. You are also able to adjust the slant on the upper keyboard to ease in playing. Even though, I have one keyboard higher, I can still play both of these using different hands comfortable. If you have a music staff/stand, you probably have to use it on the top keyboard, as there is room to play the lower, but not enough room to place the music book. It has to go on the top tier or make some other arrangement. This is a great unit for the price and allows you to place two keyboard in the single footprint.

I used this to put a Yamaha moxf6 above a 88key controller.Problems: one of the fittings didn’t expand enough to actually secure it in the tubing (1 inch round). I had to wrap it in a quarter inch of wrapping to make it big enough to actually secure. Otherwise it would literally just slide out. The other one was made properly and fit nice and tight (same tubing, same stand).The cross bar in the middle isn’t long enough to go across unless I rotate the arms inward, so their each 20 degrees of center now.Last issue is the little stoppers on the fron that keep the keyboard from sliding off when tilted, are only about .5 - .75 inches high and are slippery plastic. My moxf had a smooth angled bevel on its bottom edge so it was sliding a lot, I had to reduce the tilt to keep it from sliding off.. now only tiling maybe 15 degrees.All in all it works. But it’s not a great product. (Note: I bought mine from Amazon “used like new”)Putting it together would have been easy if the fitting worked and if the crossbar was longer. If the front slide stoppers were rubber and slightly taller it would be much more effective.

Excelente

Fantastico 2do nivel para teclado, lo use en mi base Hercules KS-120B, por lo que no tuvo problemas en adaptarse, hay que aprender un poco a acomodar bien el nivel para que no quede "levantado" o de lado, pero nada dificil, con un poco de práctica se logra quedar perfecto, es muy resistente y duradero veo que sin problema aguantara muchos años en ambientes duros, no hay ningun pero en comprarlo para los que estan dudando sin duda quedaran satisfechos como yo de la compra. me llego rápido, pague en OXXO.

安定してとても、良い商品です

Very strong and good build quality! Attaches very easily to an x frame and can be taken down fairly quick if needed for transport! It extends in size to hold a range of keys!

J’avais besoin d’installer mon ordinateur, j’aurais tout aussi bien pu installer mon deuxième clavier.Le système d’imbrication est parfait et le tout fixé est très solide.J’ai regardé plusieurs modèles et je ne regrette pas mon achat.Seul petits bémols, le réglage des molette ne permet pas d’avoir un plateau totalement à l’horizontal, c’est soit un tout petit peu trop incliné vers l’arrière ou vers l’avant. Ce qui en soi pour un clavier ne pose aucun problème, mais pour une tablette horizontale comme dans mon cas, j’ai dû rajouter deux petites mousse pour obtenir une surface horizontale parfaite. Néanmoins, la qualité du matériel est au rendez-vous.

Ottimo prodotto ben fatto ma non compatibile con il mio supporto. Peccato