DEWALT Universal Tool Connector, Multi-Function Connector Fits DeWalt Dust Extractors, Vacuum Hose, and Various Tools, 1-1/4 Inch (DWV9000)

I am a woodworker and own a variety of sanders, dust extraction is an important safety aspect of woodworking Dewalt overlooked this aspect when designing this sander. The dust bag is easy to install and remove but unfortunately does little to collect sawdust. This is evident when you turn on the sander and see a cloud of sawdust spit out from the machine, to make matters worse the connector for the bag is proprietary and a standard vacuum hose will not fit over this. I got tired of wearing a dust mask while sanding and wanting to improve my safety I picked up a Festool CT 15 dust extractor. This works great for my Bosch 6 inch dual mode sander but would not fit my Dewalt that I use for my final finish sanding. after taping the hose to the bag connector I was about ready to switch to a bosch sander when I came across this connector and decided to give it a chance. This thing works great, my festool hose slides right into it and stays tight, yet is easy to remove when I need to switch between sanders. This little connector is overpriced for what it is, but it's worth every penny. My sander no longer spits out a cloud of dust every time I turn it on, and it will prolong the life of the battery as well. Would I buy again? Yes I would, it's solid enough that I should never have to though.

After a few years of getting too much sawdust in my lungs, and being too lazy to tape a hose in place on different dust ports, I decided I should do something to make dust collection easier. Dewalt seemed to be including their airlock system on the newer tools, and it checked all the boxes (no more single use taping; letting the hose spin freely). I know there's a lot of confusion around how to make it work with the adapters, so while the star rating is for this product, what follows is a summary and brief review of all the pieces I know of in the system (not including the many geared toward concrete drilling). Overall, it seems like a great system with too little up front help to get the right parts. Hopefully this helps everyone's lung health. Collectors- DWV9000 Universal Connector This is the piece that attaches to your collection hose. It threaded onto my Shop Vac hose well, but takes a small amount of force the first time to start the threads. You may have to trim the hard plastic end of the hose some, but it attaches well to all the airlock tools and adapters. N273733 Dust Bag Since the dust bags that came with the tools would no longer work, I bought an airlock dust bag for when I wasn’t using the vacuum. I believe it is the same one that comes with the newer sanders. There's an odd design choice here. The dust bag fits well on specific tool adapters and tools with airlock built into them, but it didn't fit any of the generic adapters. They are 3/16th of an inch too long on the airlock side. I ended up trimming 3/16th of an inch off the adapters I attached to the sander and miter saw and then it worked fine. Specific Tool Adapters- DCP580 20V MAX Brushless Planer - Has an airlock port molded right into the body, no adapter needed. DWE575DC - Airlock port for circular saws. Fits the DCS570 well. DWB-N564892/DWB-N575480 - Airlock dust shoot & shield for DCS334 and DCS335 jigsaws. For some reason these were not released in the US. I've trying ordering them online, but don't have them to comment on yet. General Airlock Adapters- DWV9170 1.25 inch adapter This is what you would use to connect your airlock hose back to old Shop Vac size accessories. Seems slightly loose for the 1.25 inch friction fit. I might wrap a bit or tape around it to make it more snug. DWV9140 2-1/4 inch adapter This fits the main port on the DWE7491 table saw well. DWV9130 and DWV9150 35mm adapters These are the same size, but one is straight and one is angled. They both fit well on in the dust port on the DW716 miter saw, the blade guard port on the DWE7491 table saw, the dust port on the D26453 sander, and all the ports on the DNP615, DNP616, DW6913 accessories for Dewalt routers. The straight one is questionable with the clearance on the DW6913 and would probably get in the way on the DNP615 and DNP616. I ended up using the straight one on the table saw, the angled one on the miter saw (after trimming off 3/16th of an inch), and keeping an angled one in with the router. DWV9160 1 inch permanent adapter This one took me a minute to figure out. It has a removable metal toothed washed inside and is meant to be hammered onto a 1 inch port and never come off. It would fit the dust port on the D26453 sander, and the ports on the DNP615 and DNP616 accessories for Dewalt routers. I didn't use it for the router because a straight port would get in the way. I used this one (after trimming off 3/16th of an inch) to permanently convert the D26453 sander. DWV9110 and DWV9120 These are both two part adapters. They have the same hard plastic end that connects to the airlock on one side and screws into the rubber part on the other side. They might fit some Dewalt tools, but the other options are better. The DWV9120 fits the WEN drywall sander well (bypassing the hose that came with it). I haven't found a use for the DWV9110 yet. Other airlock accessories I don't have- DWV9180 Converts from airlock to screw threads. It seems to be for a Porter Cable drywall sander. DWV9315 and DWV9316 These are billed as replacement hoses for the Dewalt dust extractors, but I think (not sure) that they have male and female airlock ends and can be used as airlock extension hoses. There also seems to be an airlock Y-hose that wasn't released in the US. DWH200D Interesting dust collection for Dewalt drills. The end doesn't look like airlock, but it is according to the product information. DWV2759B and DWV2759 Airlock cleaning accessories.

Works great. I tried a knock-off brand first, but only this genuine DeWalt part worked for me. As others have stated, it's not clear from the description exactly what both sides of this DWV9000 are supposed to connect to. The answer is... One side threads onto the outside of a compatible shop vac hose. This is the bare hose with any coupler or tool on the end removed. For that, I used the hose from Harbor Freight's "Bauer Premium Auto Detailing Accessory Kit for Wet/Dry Vacuums". The other side twist-locks onto a DeWalt "Airlock" dust port on your power tool. It works with my DeWalt DWE6423 random orbital sander and my Craftsman CMCS551B circular saw. On the saw, I had to buy the optional dust port. I'm deducting one star for the high price. (I paid $30.48.)

For years I’ve struggled with adapters connected to adapters to make this particular adapter work. Now I found a way to toss all of them, but this adapter. Buy the Rigid “Premium Car Cleaning Kit”. It must be this kit. It’s the hose plus vacuum accessories. About $52 at Home Depot. If you buy the shop VAC hose this will not work. The car cleaning kit is a 1 1/4” hose. Once you get it, unscrew the small adapter on the hose. Remember it turns opposite of normal. Now screw on your DeWALT adapter. The other side of the hose will fit into your DeWALT shop VAC or any other shop VAC as it’s a 2 1/2” connector. It’s perfect. Not close. It’s a perfect fit. Now this will work like the expensive $400 DeWALT dust extractor. It’s amazing, now every vacuum attached DeWALT tool works. Hose is great, better than the DeWALT hose and zero adapters. Finally an answer to this nonsense. Just used 3 tools tonight. No adapters!

Works great. I attached it to my Hercules dust extractor. I thought the adapters that came with it would fit, but obviously I had to order this adapter.

I have not used this on a sander before. It really reduces the dust in the room and there is no going back to a sander without it, A good companion for working with a Henry hoover, use the better quality bags. Well designed and a no brainer, Good way to keep you healthy with very little dust in the air. A little expensive but works with the Black Decker orbital sander and their Palm Sander, Thoroughly recommend this product,

Todo muy bien, excelente producto original Dewalt

fits perfict

I bought this for a DEWALT cordless drywall sander and it fit perfectly. It also fit my round orbital sander.

Ottimo