ARCTIC Liquid Freezer III Pro 360 - AIO CPU Cooler,3 x 120 mm Water Cooling

I had thrown this baby into an ASUS prime 201 and it fit beautifully! It’s slim, sleek design and magnetic vrm cooler makes it even better. The fans do get a little noisy at 3000rpm however you don’t really need them that high. Installation was fairly easy, you just have to keep the left and right brackets a little loose. The all in one cable also came in really handy. For $80, performs way better than my nzxt lcd. You cannot complain about the price!

Works great and keep my cpu at a good temp, even when running demanding games like BF6, Cyberpunk and other MMO titles that I play, honestly I have all my fans arctic and the aio as well. Easy use and install, it fit great on my case and the compatible with my build. Can't go wrong with Arctic,this is my number 1 for pc parts over any other brand. Product is perfect, quality is great, installing it's products are easy for me, love the colors that I've bought and the prices for the parts are budget friendly for me. I'd recommend Arctic products to anyone. Arctic will be my personal go-to pc parts for me and I'm a PC builder. Great work Arctic!

The ARCTIC Liquid Freezer III Pro 360 lands squarely in “gamer-approved beast mode” territory — it’s one of the strongest-performing AIOs on the market right now, especially for high‑wattage CPUs. Across multiple professional reviews, it consistently punches above its price class with standout thermals, strong fans, and clever engineering. 🔥 What Makes It a Gamer’s Cooler • Top‑tier cooling performance — Reviewers repeatedly highlight its exceptional thermal performance, thanks to the thick radiator, high‑pressure P12 Pro fans, and integrated VRM fan. It excels in both noise‑normalized and max‑speed tests, keeping even the hottest CPUs in check. • Built for modern high‑end CPUs — It’s praised as one of the best coolers for chips like the Ryzen 9950X3D and high‑draw Intel processors, delivering chart‑topping results at a surprisingly reasonable price. • Gamer‑friendly design — Hidden cables, long tubing, and a clean aesthetic make it easy to build with and perfect for RGB‑leaning setups. PC Gamer calls it “the new AIO to buy.” • Quiet until you push it — At normal loads, it stays impressively quiet. At max fan speed, it gets loud — but that’s expected for a performance‑first cooler. 🎮 Real‑World Gaming Experience • High FPS stability — Lower CPU temps mean fewer thermal spikes, smoother boost clocks, and more consistent frame pacing in CPU‑heavy titles. • Great for overclockers — The integrated VRM fan helps keep motherboard temps under control during long gaming or stress sessions. • No‑nonsense installation — Native offset mounting for Intel and AMD helps center the cold plate over the CPU hotspot for better heat transfer. 🧊 Quick Gamer Verdict If you’re building a high‑end rig or pushing a power‑hungry CPU, th

If you value function over aesthetics, the price to performance of this cooler can't be beat. Though I find the all black design without RGB lighting has a clean, sleek look, you may think differently. Compatible with most CPUs on the market, this cooler is better suited for AMD AM4/AM5 processors. When installing with Intel CPUs, it requires you to use their contact frame. This is supposed to help flatten the IHS for better contact, but their contact frame isn't that great. You may think you can just get a better contact frame, but that is not possible as the included contact frame has mounting points that no other frame offers. Both AMD and Intel use an offset mount which targets the hot spot of the CPU, helping to cool the processor more effectively. The three included P12 Pro 120mm fans are quite good. They provide ample airflow, have good static pressure and at low RPMs are near silent. Even at 1000-1500 RPMs the noise level is good. The VRM fan on the pump is also pretty quiet at low RPMs, and helps cool nearby components. The pump is near silent even at full speed. The included fan/VRM/pump cables had excellent length to them, making it easy to route and cable manage. The install procedure is where this loses a star. It was incredibly frustrating to mount, I had to take a few minutes to collect myself. There are 2 points you have to screw down, and it took me several tries to successfully install. I would get one screw started a couple turns, and go to get the other and tweak the position until I think I got it started and go back to the other side, only for it to pop out of place. I went through this a handful of times before I was able to finally get it installed. The pump mount definitely needs a rework. Another thing to consider is compatibility with your case and motherboard. The radiator is 38mm thick and with the 25mm thick fans it has a combined thickness of 63mm. This is too thick for many cases, so check your case manual/website before purchasing. Additionally, the pump can only be mounted in 1 orientation, which may conflict with other components in your PC, such as your top m.2 SSD mount. This is an easy "shut up and take my money" recommendation despite the frustrating install experience. The value of this AIO is insane for its performance, and I'm quite happy with it. If you're thinking of pairing this with an Intel CPU, you'll probably be OK; though due to the contact frame, personally, I would consider a different cooler.

Great CPU cooler. Dropped my computer’s idle temp to 32* with a maximum temp of 86* during stress test. (I have an i7-14900 that would thermal throttle at 100* during stress test with air cooling). Fans and pump on max aren’t that loud. Majority of the time it is silent. Amazing product for the price, plus no RGB lights, which is rare with pc parts and fans these days.

So for those that do not want to read the review, I'll just say it is an excellent CPU water cooler, and a must if you have a higher end CPU that likes to run hot. Now for those that want to read more, here's my review: Before I start with the details, I definitely need to stress that is imperative that you measure your case before purchasing this CPU cooler, since the manufacturer isn't lying, it requires a lot of space. That being said, if you have a case that can handle it, it works great and keeps the CPU nice and cool. Okay so on to the review. The reason I purchased the Artic Liquid Freezer 3 Pro is after building a new system with an Intel Core I9 processor, I found that the CPU cooler I purchased for it (Cooler Master 120L) wasn't really rated for such a powerful CPU, and under load the CPU temp was hitting 85c. Now 85c isn't a killer if it's just a quick spike, but when doing video encoding it was hitting and staying at that temp, which just isn't good for the CPU. So doing a little more research, I saw that Artic Liquid Freezer 3 Pro got great reviews, and was recommended for high end processors like the I9. Installing the Artic 3 Pro is extremely easy, unfortunately I built the system in a smaller full size tower case, and the new CPU cooler wouldn't fit the chassis. Luckily my secondary machine was in an even bigger chassis, and it turns out it had mounting holes and rubber grommets already there to mount the Artic 3 Pro. So after stripping the 2 systems bare and swapping all of the components, booted up the new system with the Artic 3 Pro and checked the temps, and my basic idle temp is 26-28c, a good 10 degrees lower than the idle with the old water cooler. I haven't had a chance to stress it out with some video encoding yet, but I've already noticed that the heat spikes I was seeing previously seem to be gone. So in summary, I love the new CPU water cooler! I did run across one issue that had me worried when I first booted it up, and that was that there was a constant low humming noise that seemed to be coming from the unit. I'd read a couple of other people comments saying there was a low hum, but I figured it was a one off for them. Of course I like my rigs to be as quiet as possible, and since the PC sits right under my desk I knew this was going to drive me nuts. Luckily I was able to figure out the problem, which was the tubes from the CPU to the radiator are long and stiff enough that they were touching the side panel, and the humming sound was the noise from the liquid moving and being amplified by the metal door. Fixed this issue with a few zip ties to move the tubes slightly inward so they didn't contact the door, and now the system is as quiet as can be. I hope this review has been helpful, cheers.

This is anexcellent product, perfect for any build that has the clearance for it. Price to performance is excellent and as anyone on the internet will tell you, this thing is super high quality. I, unfortunately have too small of a case for the 38mm + 25mm fan to have it clear the motherboard without fitment issues. Be aware, but its still a great AIO

As noted when buying it, the radiator is larger than most. I checked and double checked it would fit in my case so that did not cause an issue, but it may be for someone else. What is not mentioned (at least I didn’t see it) is that the pump is very particular about where it sits, ant its quite low. If your board has any large heatsinks below the socket, you may have a bog problem. I have an Asus x870E-E Neo and it has a large m.2 heatsink that prevented my install. Two other things to consider is that the mounting brackets and the tubes are not super flexible. Starting with the brackets instruction video was not clear to me and I ended up trying to install the brackets upside down (The letters should be up and visible). There is an offset in the hole of the bracket so the first attempt the pump was higher and the heatsink was not in the way. But the screws would not catch because the holes were too low. This caused me to waste the thermal paste that was provided and I had to buy more and rush deliver it. I watched the install video multiple times and had to zoom i. To finally see that the brackets were wrong. This led me to find out that the pump sits too low for my motherboard. Finally the hose. I put in the radiator first (not according to the video) because as always, I don't have enough hands to try and mount the pump and make sure the radiator does not fall into my case damaging the parts already installed. The hoses really fight you while trying to install. Just to note, I’ve installed multiple AIO Coolers before and this is how I always have done it and it was never a problem. It’s not something that I imagine would prevent an install, but something users should really be aware of. From what I can tell, all these issues listed are actually intentional because they make for a superior product. The larger radiator and the position of the pump improve the cooling performance. And the stiffer tubes likely improve durability. If you are aware of these things and make sure it will fit in your case and on your motherboard, I think it will likely be awesome (never could test, but other reviews support this). But it did make for a very frustrating install and a loss of significant time and money for me.

Coloquei esse Walter cooler no processador Ryzen 7 9800X3D e não passa de 40 graus

Se avete seguito l'evoluzione dei dissipatori AIO, sapete che Arctic è una garanzia, ma con questa serie III hanno superato se stessi. L'ho scelto per raffreddare il mio nuovo Intel Core Ultra 7 265K e i risultati sono semplicemente sbalorditivi per questa fascia di prezzo. ​ Una delle novità più interessanti è l'inclusione del contact frame specifico per il socket LGA 1851/1700. Invece del solito sistema a staffe, si sostituisce direttamente il meccanismo di ritenzione della scheda madre. L'installazione richiede un minimo di manualità in più, ma garantisce una pressione perfetta sul processore, eliminando i problemi di curvatura del chip. Sulla mia B860-Plus si monta perfettamente, anche se lo spazio intorno ai VRM è millimetrico. ​ Per quel che riguarda prestazioni termiche e silenziosità l'Arctic brilla. Mantiene l'Ultra 7 a temperature incredibili: in idle siamo sui 30°C e sotto carico pesante in rendering non ho mai visto la CPU superare i 75-78°C. Il radiatore da 360mm ha una massa radiante generosa e la ventolina dedicata sulla pompa non è solo marketing: aiuta davvero a tenere fresche le fasi di alimentazione della scheda madre, cosa fondamentale se non usate una top di gamma. ​ Il design è molto "industriale" e massiccio, deve piacere. Un enorme pro è la gestione dei cavi: le ventole sono già pre-cablate lungo i tubi e arrivano alla pompa, quindi avrete solo uno o due cavi da collegare alla scheda madre. Un paradiso per il cable management. ​ Cosa sapere prima di comprare: ​- Spessore: Il radiatore è più spesso della media (38mm + ventole). Assicuratevi che il vostro case abbia spazio a sufficienza sul top, altrimenti rischiate che tocchi le RAM o i dissipatori della mobo (io ho dovuto tagliare un angolo dell'AIO per questo motivo) ​- Tubi: Sono belli rigidi e di qualità, ma richiedono un po' di spazio per essere piegati correttamente. ​ Difficile trovare di meglio, anche spendendo il doppio. È potente, silenzioso e risolve alla radice i problemi di contatto dei nuovi processori Intel. Se avete spazio nel case, è la scelta definitiva per chi cerca prestazioni da workstation senza il rumore di una turbina.

تعامل ممتاز وصل بشكل سليم وكما توقعته شكرا للبائع وشكرا امازون

رائع وسهل التركيب لقد انخفضت حرارت معالجي i9 13900k

Excelente producto, extremadamente eficiente y de precio muy bajo. Ya es el segundo que compro, y sinceramente me pregunto qué sentido tiene gastar más para tener un rendimiento y/o confiabilidad inferiores... Es sin duda uno de esos rarísimos casos en los que un producto superior se vende a un precio inferior. Milagroso! Sí, el grosor es un poco superior al de otros rivales, pero precisamente esto contribuye a las excelentes prestaciones del producto! Sin embargo, lo he instalado en tres PC diferentes y solo en uno tuve que intervenir modificando ligeramente el interior de la caja para instalarlo. Intervención de todos modos muy factible.