240FT Drip Irrigation System,Automatic Drip Irrigation Kit with 1/2 inch Hose 1/4 inch Distribution Tubing and Accessories,for Lawn Raised Bed Greenhouse Plant Watering System

Almost perfect and it works pretty well. The contents of the kit seem almost like a toy, the pieces are small. Each irrigator is intended to water a single plant, but it comes with enough units to do the job we needed - and have parts left over. It is easy to assemble. Each sprayer can be adjusted to the particular watering needs of the plant, which is a nice feature. The kit comes with everything you need, even Teflon tape for attaching to the water spigot and minimize leaks. Plenty of 1/4" tubing to cover a large area. The 1/2" tubing, The kit includes a model layout using all the pieces, which is useful. A 1/4" branch can easily handle up to 4 sprayers and save you tubing and couplers. Also, a branch can be terminated without the need of a T coupler, the extra short tube and the plug, just feed the tube into the last sprayer; less work and less material. The kit comes with a 1/2" end plug that requires a short length of 1/2" hose and a double hose attaching operation. A simple twist cap that replaces the tightening coupler of the 4-way barbed T would have cost the manufacturer less money and would make it easier and faster to install. The same applies to the end plugs for the 1/4" lines. They require an extra segment of tubing. A plug that attaches directly to the coupler would make things simpler. All in all, the system is pretty good. Supplement it with an automatic timer valve, and you have a very good irrigation system for your plants.

The price for this irrigation system was incredible compared to others we have tried and the fact that there are multiple connections to fit multiple watering needs made this kit far superior. My husband and I were able to run the forty foot 1/2" tubing along a very difficult to reach ridge that was occupied by fifteen pots. The four-way splitters made it easy to distribute the 1/4" tubing to individual pots, while allowing us to adjust the water pressure for precise watering without waste. The pressure of the water remained consistent all the way to the end of the line - quality and functionality of the product did not disappoint. I know other reviewers had commented on the difficulty of connecting the hose to the sprayers, but warming up the end of the hose slightly worked like a charm. We will definitely reorder this product in the future!

I bought this for an expensive area, initially my 16'x16' garden, I loved how it watered each plant equally and put it right where you need it as opposed to watering excessively. It works well from my garden hose on a batter operated timer (bought separately) this is a grease substitute for a flower bed without having a single system. I also bout two more kits for my from yard, I have a row of wild flowers and hydrangeas, it's about 65feet, the water is just as strong throughout the whole thing. I also use it along my fence line on the side, I have 300' span of jasmine I'm trying to grow. I live this system as it's so versatile and easy to put together. Oreo tip use a lighter to warm the tube before you stick the adapters on, makes it easier. Also, they do sell separately more spray heads and hosing if needed.

I was really hopeful that this would work. I was wrong. The set up and install was easy. however the issue was that once water pressure built up everything would fail and at different times, there was no consistency. Heads of the sprinklers would pop off due to poor thread on the sprinkler base. I throttled the water pressure down, and then ran into the issue that if the water pressure was too low only some of the heads would work. If the water pressure was too high ( high enough for all heads to have water coming out.) failure was likely to ensue. there are only 4 way splitters. there is no other way to split from the 4 way from the 1/2" tube to the 1/4" tube. SO, when you install it, if you don't need all 4 splits, guess what, you have 3 potential blow off points. the more you add the more blow off points you add. the worse it gets. listen the price is great and the amount of product is excellent but the headache of if all is not worth it. I spent so much time trying to get the heads just right, where everything is watered, enough pressure at each head, tested multiple times, and then left alone to be watered with a timer. The next morning i had 3 blow outs off the 4 way splitters, 3 head off the sprinklers, and none of my plants watered. SAVE YOURSELF THE TIME. some people who had success either had short runs, used 1 or 2 splitters, everything was close to the faucet, and the beds and plants all close together. if this is not the case, buy something else. I am telling you i used zip ties, i used thread tape, i used every tool and trick.

I have two of these kits and just set them up along my house to about 60 plant pots. My husband and I set them up with no issues, we were incredibly patient though and found that when connecting them it's best to creating a bubble between your thumb/index and the irrigation head as you're pressing it on - hopefully that makes sense. Our hoses have not disconnected because we did a good job putting them on the protectors. My main issue is that the sprayers don't spray how I wanted them to, I was hoping they would reach and spread rather than drip directly down (which they're doing). The pressure seems good, lots of running water, but the heads don't work for some reason. They randomly work though, which I can't figure out - it's not a distance issue. I would recommend running the 1/2" line as close to the 1/4" line as possible, less 1/4" and more 1/2"! Which is why I bought two kits. I'm not particularly strong, and some connections were hard for me and it hurt my hands, but I did it in segments over a month which was doable.