CraftablesRed Vinyl Roll - Permanent, Adhesive, Glossy & Waterproof | 12" x 10' | for Crafts, Cricut, Silhouette, Expressions, Cameo, Decal, Signs, Stickers

The Transparent vinyl is not used for transferring.You use it to protect documents and or stickers.It is in fact permanent so using it as Transfer Vinyl will result in it sticking to your cup or glass and leave a resadue. It's a very strong bond but I use it for laminating my stickers for esty.I made this to clear it up for these people giving bad reviews on a product they know nothing about.Its a Clear version of adhesive vinyl that is permanent.I really like it it protects my stickers well.

ATTENTION NEW CRICUT USERS! you WILL mess up getting to know your cricut. Dont go buy fancy expensive brand name products and then cry about wasting. I bought this and love the product. easy to cut, weed, transfer. Take your time & pay attention to detail. I was nervous after reading the reviews but i gave it a try and the product is great. Less than a $1 a foot. you cant beat that! LOYAL Customer for Life!

It’s pretty vinyl just looking at it, but I would not recommend it or the transfer tape. As you can see, I had many problems out of both. Once I rolled it out, almost the whole 12x12 mat was ruined with markings, then the transfer tape peeled letters. Finally not 2 seconds after fixing everything, I was trying to smooth it out and it cuts like butter easily. I don’t see this vinyl holding up long. Sad because it really is pretty. Easy 20 minute job (at most) turned into over an hour job. I’ll stick to my oracle/sisser brands.

Absolutely terrible product. I was so excited to use with my Cricut, but this product wouldn’t peel and definitely stuck to nothing but the transfer tape. Huge waste of money. Do not buy!

The only think this paper is half way good for is very large letters and shapes. I tried cutting several things on the smaller side and it just rips up while it is cutting. Also when you do finally get something cut out of it, it does not fully cut or weed well. I have tried 15 different things and have adjusted my cricut several times with lighter and heavier pressure. It is simply just a crappy product. I am sorry but maybe craftables can work on making their adhesive a little stronger. It wont even stick onto water bottles unless it is completely flat plastic or glass. If you are trying to make a sticker for a hydroflask, buy something else.

They tricked me! It says 2' = 2 feet... Which is still pretty great. But the quality of the vinyl is pretty cheap, it came very wrinkly. If you are practicing or doing some silly project you don't care much for, its a good start. But for anything else, do not use this for quality. It's not the best and I'm only using it label stuff on boxes and what not. Things I don't care much for and won't mind if it doesn't last. Will NOT be using for water bottles or anything like that, will have to look into better quality for those projects. Also, this is non-refundable so think wise before purchasing!

If I could do 0 stars I would. I got this product excited to try it and was left with disappointment, frustration and anger.I cut my design on my cricut machine just like any other vinyl and it pulled pieces of the design out as it went making the design unusable. I know it’s not my blade for 2 reasons: 1) I just replaced my blade with a new so it’s a new, sharp blade snd 2) I did test cuts on a few other pieces of vinyl that I have and they cut just fine.Another thing with this vinyl is it doesn’t stick worth a crap. When I did I try to salvage a few of the possibly salvageable designs pieces still came off as if they hardly stuck to the backing.Not only did it not stick well to the backing paper, when I tried to apply it to my glass wine glass it wouldn’t even stick to that.Permanent my butt. Don’t waste your money on this. I went back to 143vinyl and ordered stuff from there that I know works.I did the cut twice to verify if maybe it was just that stretch but the second stretch came out just as bad. That’s why there’s two sheets shown in the pictures and then a couple of single sheets.

Extremely Low QualityVinyl is poor quality compared to all other vinyl I've used. Was very disappointed that I'm now stuck with a huge roll of vinyl I have no use for since I was unable to return due to return policy. Vinyl is not smooth - appears to be scratched throughout the roll, when cut and adhered to the desired surface you'll note that it doesn't stick well. I tried different surfaces and although it gets the job done as far as looks go, don't expect it to last long. Very low quality and not happy at all with the product.

*Update 5.29.20: re-ordered and received order as described. Was exactly what I was looking for. Quality seems good and durable and cuts in my Cricut Maker very well. Customer service was excellent. Thank you!Original post: Item received was not as described. Received transfer tape and not clear permanent vinyl. Have reordered-will update review once new order arrives.

I really liked this vinyl! I tried it in red and found it to be comparable to oracal, just a certain tiny bit thinner (barely noticeable), but really easy to work with! Weeds very well, transfers easily! My only thing I would improve on, is the backing is plain white... no lines to use as guides, but other than that, it’s great! I would repurchase!

I thought this would be a more substantial vinyl, but it is very thin, like cello tape or even transparent tape. If you want to lay a large (>6" or so) piece onto a backboard, it's hard to keep it flat with no bubbles, and once the vinyl film hits the backing, it's stuck for good, without ripping the film or the backing. BUT IT IS POSSIBLE. Just not recommended to the faint of heart. It looks good if it has no wrinkles or bubbles.

I bought this vinyl to do office door lettering.When I first opened the package, I noticed the vinyl was pulled away from backing and wrinkled. (As seen in pictures). When I unrolled the vinyl I noticed a lot of puckering and more wrinkles.Before I could do anything with the vinyl I had to use my scraper to flatten and squeeze out the wrinkles. I cut a piece and used it on my cricut to cut out some of the names I'm working on. Well, ALL dots for the (i's) came off. Yes, I can put them back on but lining them all up was such a nuisance.I do not find this vinyl sticky enough and I will not buy it again, nor do I recommend anyone else does.I will give benefit of the doubt, maybe this was just a bad roll, but I don't have money to waste to find out.Now off to buy the products I know I can trust.

{"videoWidth":0,"videoUrl":"https://images-na.ssl-images-amazon.com/images/I/E1WMTRCsXaS.mp4","clientPrefix":"vse_reviews_desktop_rgqh3vax810by_1638975211493","awaConfig":{"useUpNextComponent":false,"shouldPersistClosedCaptions":true,"initialVideo":"RGQH3VAX810BY","shouldPreload":true,"isChromelessPlayer":false,"closedCaptionsConfig":{"captionsOnTexts":{"en":"English (Automated)"},"captionsOffText":"Captions off"},"isVideoImmersivePlayer":false,"skipInitialFocus":false,"disabledViewIds":["replayHint"],"customerId":"0","containerId":"vse_reviews_desktop_rgqh3vax810by_1638975211493-player-7f835edb-9b4f-420f-9714-2a1c475fa2c7","requestMetadata":{"marketplaceId":"ATVPDKIKX0DER","clientId":"VSE-US","method":"cr_inline_review","requestId":"V54GBDAK7WTVJGTWYNRV","pageAsin":"","sessionId":"141-1528370-2786125"},"shouldLoop":false,"shouldDisableControls":false,"clientPrefix":"","useAutoplayFallback":false,"sushiMetricsConfig":{"isRobot":false,"clientId":"VSE-US","videoAsinList":"","weblabIds":"","eventSource":"Player","sessionId":"141-1528370-2786125","refMarkers":"vse_reviews_desktop_RGQH3VAX810BY_1638975211493_ref","placementContext":"cr_inline_review","marketplaceId":"ATVPDKIKX0DER","isInternal":false,"endpoint":"https://unagi-na.amazon.com/1/events/com.amazon.eel.vse.metrics.prod.events.test","requestId":"V54GBDAK7WTVJGTWYNRV","customerId":"0","sessionType":1},"ospLinkCode":"","languageCode":"en","version":"","shouldStartMuted":false,"airyVersion":"VideoJS","languagePreferenceStrings":{},"enableInactiveFocus":true,"isReactFactory":false,"enableDelphiAttribution":false,"shouldAutoplay":false},"imageUrl":"https://images-na.ssl-images-amazon.com/images/I/91D0LSX1fbS._SY256.png","closedCaptionsConfig":{"captionsOnTexts":{"en":"English (Automated)"},"captionsOffText":"Captions off"},"sushiMetricsConfig":{"isRobot":false,"clientId":"","videoAsinList":"","weblabIds":"","eventSource":"Player","sessionId":"141-1528370-2786125","refMarkers":"vse_reviews_desktop_RGQH3VAX810BY_1638975211493_ref","placementContext":"cr_inline_review","marketplaceId":"ATVPDKIKX0DER","isInternal":false,"endpoint":"https://unagi-na.amazon.com/1/events/com.amazon.eel.vse.metrics.prod.events.test","requestId":"V54GBDAK7WTVJGTWYNRV","customerId":"0","sessionType":1},"mimeType":"video/mp4","isMobile":false,"videoHeight":0}Video Player is loading.Play VideoPlayMuteCurrent Time 0:00/Duration 0:00Loaded: 0%Stream Type LIVESeek to live, currently playing liveLIVERemaining Time -0:00 Playback Rate1xChaptersChaptersDescriptionsdescriptions off, selectedCaptionsCaptions off, selectedAudio TrackFullscreenThis is a modal window.  After struggling with some HTV vinyls, it was SUCH a pleasure to use this product, which did what it was supposed to do!PLEASE NOTE: instead of the "metallic vinyl" setting on my Cricut Maker 3, I used the "premium outdoor vinyl" setting to ensure a clean cut.