SMALLRIG Leather Half Case for FUJIFILM X100VI, Flip Cover, Shoulder Strap

I normally throw my x100s in a backpack and forget about it. For the x100vi, I decided to go ahead and get this kit to provide some protection. For the strap, its a pretty standard strap. I read that it was pretty short and found it comparable to the original fuji one. Its about 41" long from eyelet to eyelet. Its pretty soft and not too stiff. For the Full case, I know there are people that use the various filter adapters so.... The full case fits my JJC filter adapter without the round hood. It closes and stays closed via magnets. Without the hood, the distance from the camera body to the end of the filter is about 31.25mm The distance from the half leather case to the end of the filter about 28.5mm. The "cup" in the full case is about 30mm. It attaches to the half case by both magnets and velcro. This can sometimes mess with lining up the velcro, but not a big deal. The half case has a cutout under the body to provide battery access. It adds about 9.5mm to the bottom of the camera. The case itself feels nice and provides better grip. It attaches to the camera via the tripod mount. And the screw that attaches it also has a tripod mount so you won't lose a mount if you use this case. The cutouts all line up perfectly and the case remains flush with the body. Overall, I'll highly recommend. tldr: Yes it fits filter adapters as long as its no longer than 31.5mm long. Measured from the body of the camera to the filter. The strap is 41" long from eye to eye. Case is flush and fits the camera well. It makes it 9.5mm taller. Yes I recommend Bonus: comes with soft shutter button and hot shoe cover.

Very nice. Fits the camera perfectly, looks good, protects against casual bumps and insults, doesn't interfere with controls, and is easy to open and close. The front cup is deep enough to accept the adapter attachment and lens cover. I tramp the woods often with the camera hanging from my neck. When I shoot, I don't detach the outer part of the case but just flip it back and leave it hanging, then flip it back to tramp on. The Velcro strips hold it in place. The case is solidly built and attractive. Note: it's made of leather. I like its leathery smell and that it will age with marks and signs of use. Some folks will prefer an item not of animal origin.

The case looks and feels great, I love the fact that the top cover attaches by velcro and not with some kind of snaps so it can still stand on flat surfaces. The strap while it is nice and feels good is definitely too short, I can barely put it on as a cross strap and it's a hassle to move it from cross to neck so I have to keep it just around my neck all the time which is a hassle in itself. I would have given it 4.5 stars because of the strap length but since I can't I'm giving it 5 stars as the case itself is really good and doesn't deserve a low rating because of this accessory. Another very small thing is I would have liked to know in advance I will receive a free soft shutter because I already bought another one, but you can't really complain about getting free extra stuff right? Just know that you will probably receive one so don't waste your money elsewhere.

I like the lower half, that's just fine and does exactly what it's advertised to do. There's velcro on the bottom that I don't love, but that's not a huge deal. The strap looks and feels cheap, but it works. The top half baffles me. The case comes with an easy press shutter button, that does not fit when the top half is on. Same with the smallrig thumb grip, it has to come off too. You'd think the case would fit two of the more popular accessories for the camera sold by the same company, especially when one of them comes with it!

This is the best half case I've found for the X100VI. Better fit than the Fujifilm X100V case and other 3rd party cases I've tried. Also, the leather is soft and feels great in the hand. However, I do not like the velcro on the bottom. There are magnets in the bottom that attach to the outer case so why do I need the velcro? And while I love the outer case magnetic closing, the design is pretty short sighted. Does not protect the sides of the camera's top plate (as you can see in the pictures). Would have been better designed more like the other 3rd party full cases and the Fujifilm. The outer case also does not have any extra room for 3rd party lens hoods. Just 1-2 cm deeper and it would be perfect. I use the Haoge lens hood (the smallest lens hood I've found) but it doesn't fit the outer case. Also, i tried the stand-alone Small Rig half case but it's not quite as good. The magnetic closure on this half case is significantly stronger than on the stand-alone half case. No idea why they aren't exactly the same. Also, this one has another magnet on the opposite side (or at least it has a metal insert and the outer case has the magnet. The stand-alone case's battery door did not close with as much magnetic force. Not sure if that's a defect or as designed. I may keep this as the half case does feel really nice, but I might also just stick with the stand-alone half case since I can't use the outer case when I have the Haoge lens hood attached. But right now, it's one or the other. The Fujifilm X100VI case doesn't fit well, the outer case doesn't fit 3rd party lens hoods, and its design is a significant step backwards as compared to the X100F version (which had snap/magnetic closures and fit 3rd party lens hoods ... COME ON FUJIFILM!!!). I tried one other 3rd party full case but it smelled bad, fit poorly, and also didn't fit 3rd party lens hoods.

Great quality. Vintage look.

The workmanship of this camera case is first rate, and the fit and finish with the X100VI is absolute perfection! What I love most about this case is how SmallRig made sure it absolutely fit, event the removable screw to enable a tripod/handheld, but also has a feel that will age as you use it. That fits in the old school feel of this camera (mine is silver, vs all black), but also works extremely well as a protective case. The strap and neck pad is perfect on the camera strap, and the add in for the SmallRig shoe and soft release red button was a great surprise. Overall, this is a better case than Fujifilm offers for the X100VI, and delivers on that look/feel when you want something a bit old school, but fast access for swapping filters, cards, and attaching stands.

Love the quality of this case! Easy to use and provides nice protection for my camera! Very comfortable to wear. Would recommend this product.

Presque parfait ....L'emplacement pour retirer la carte mémoire ou la batterie est trop ajusté et il est difficile de s'en servir ... La lanière n'est pas top et j'en avais acheté une autre de meilleure qualité....Cependant l'ensemble est de très bonne facture d'un excellent qualité prix et l'étui se fixe bien avec la vis dessous le sabot de l'appareil.

La funda original tenía malas opiniones en realización a las cosas que quiero para facilitar el transporte de mi cámara, como la comodidad de uso, etc. Me decidí por esta funda luego de leer todos los comentarios malos. Concluyo: la mayoría de comentarios malos son porque la correa no es del mismo material (no es piel). La funda es de piel, excelente calidad y fácil montaje. La correa es mejor que la original de la cámara, que tampoco es de piel, otras fundas ni siquiera incluyen la correa, como la funda de Fujifilm que espera que te apañes con la que viene la cámara, la cual es bastante incómoda. Si veo que no me convence esta, pediré otra que vendan de forma individual. Trae otros regalos que es el botón de la cámara y la plaquita para ajustar. Buen producto.

Delivered on time and an excellent purchase. The quality is great

Good quality, things that people complain about, like color differences, are acceptable to me. Also come with a hot shoe cover and shutter button.

excelente produto! qualidade, estética e usabilidade 10/10.