Universal Lens Cap 2.0, Magnum, Single Lens Cap

I love these so much!!! I am either losing my caps are struggling to put them on my camera but anymore! These are so easy to use and convenient for shoots. I love that they come in their own cases too so you can keep the shape if you ever need to store them!! A must-have for any photographer!

I absolutely love these. I love the stretch the protection and everything. I got the 4 pack and 2 of them already have holes in them after just a few months around the end from simple wear. They are like cracks from stretching over my 50mm (which isn’t that big). But the other two are holding up good.

This is advertised as a universal lens cap. Yes, almost. The maker of this thing forgot to tell you the dimension of this thing. I measured this cap and found that the diameter and height are 6.5cm and 5.5cm respectively. If your lens diameter is huge with a diameter close to 10cm, then this cap only has about 1cm height when you wrap it onto your lens. If your lens diameter is small enough such as some of those 50mm f/1.8 normal lens, then you could be in big trouble.The first image is a Nikon AF-D 50mm f/1.8, which is smaller than the cap. You do not even have to stretch the cap and the lens simply goes in smoothly (second image). In this case, because the lens can easily go in and out of the cap, what is the supposed "protection"? Moreover, it is not water-proof as shown in one of the maker's video (i.e., the lens with this cap going into water). Rolling the lens with cap on ground as the video shows is a joke because the lens will come out from the cap and dusts go in to the cap easily.Now let us use a larger diameter lens, a Nikon AF-S 24-140mm 1:4G ED VR. The filter size is 77mm and the diameter is larger than 80mm for sure. The 3rd image shows the lens and cap and the 4th one shows the result of wrapping the cap onto the lens. Now look at the 5th image and you will notice that the cap leaves many small gaps between the cap and the lens zoom ring, and, as a result, water and dust can go in easily.In my opinion, that "fit 99% of DSLR Lenses" is a joke. From what I wrote above, for smaller lenses this cap is an open-end pouch and for those larger diameters lenses this cap is incapable of staying in place as the collar would be way too short. I don't know how the seller came up with this 99% number. So, IMO, the best fit lenses may be those with a filter size between 62mm to 77mm.Third, the thickness of this cap is less than 2mm and the material is some sort of soft plastic. I can easily flip the cap inside-outside as shown in the 6th image. Because it is not made from hard material, the protection of the front glass surface is VERY VERY questionable. The 7th image shows that a screw driver is placed on the top of this cap, and just a little force would push the cap in making contact with the front glass surface. What if a strong force hits the front of this cap? I gather the cap could absorb some force due to its soft material, but the front glass will be damaged for sure.Fourth, the material used to make his cap can suck all kind of dusts, fibers, etc. on its surface, and it is rather difficult to remove. This can be seen in all the images included in this review. I took these caps out for just a few minutes and put them on table and/or ground. The inner surface of this cap seems to be a little better but still a dust sucker. A good lens cap should not bring dusts and fibers to the lens. Well, this cap simply does the opposite.In conclusion, the videos shown on the web is not real and should be considered a fake advertisement because (1) the cap could not perform the most fundamental work -- protecting the lens, and (2) the seller failed to reveal the dimension so that if your lens has a not so compatible size you may end up buying this cap as a waste. If you really like this type of lens cap, I would suggest that you visit Lens Cap's site and find a Hoodie that has the right size for your lens. The Lens Coat Hoodie has a hard front to protect the front glass of your precious lens. If you can accept the Hoodies, avoid this cap at all cost. In fact, the Hoodies may be cheaper for certain sizes.DISCLAIMER: I am not an employee of Lens Coat nor working for a competitor of the maker of this cap. I just happen to have many larger diameter lenses each of which is fit with a Lens Coat Hoodie. So, I bought two universal caps to test with some medium size lenses.

UPDATE: GREAT IDEA BUT ONE OF THM TORE!!! OTHERWISE IT WOULD HAVE BEEN PERFECT.

I love this lens cap! Perfectly snug fit on my lenses, and even adds some traction to my camera, as I often leave it sitting on a shelf for easy access throughout the day - I often worry my kids will bump it and make it slide off.This lens cap is just what I needed! The plastic stock lens caps just aren’t the same and get lost so easily.I am also blown away that the owner of this small business took the time to write me a thank you note, I’ve never received anything like that from an Amazon seller! So incredibly kind! I will definitely be buying extra to keep on hand. Thank you for being great!

I bought my boyfriend a camera for Christmas but the lenses didn’t have covers and I didn’t want them to get scratched. I ordered some other ones off Amazon but they didn’t fit and I was frustrated. I bought these and they are so great! Fit perfectly with different size lenses. I am very happy. We take photos of nature mostly while hiking so I’m excited this will help protect against dirt or any other unfortunate accidents. The owners really took the time to write a personal note and I appreciate that! Love supporting family businesses!

Perfect for capping over ND/polarizer/diffusion filters that weren't made to accept factory lens cap. I now own 6 of these. I hope these guys get rich.

Easy to put on and take off, perfect!

口径105mmかな？入りません。他はキャノンの50-200のレンズフード越しでも無理が有りますね口径は74mmかな？リアにしか普通に入りません買って損しました。

I used to think these were fabulous... bought two... camera fell, first one tore and the filter ring dented, but lens was ok, thankfully. Carried on... but it’s since torn further. The other cap has just started to split, for no apparent reason. Lifetime warranty... I hope that’s true and that the manufacturer will replace them both as they were super-expensive pieces of rubber.

This fits my #62 Olympus lens perfectly. The lens cap is OK on the #58 - slightly looser but still stays in place.Drawback for me, as I always have it on the lens, is that you have to remove the lens hood but thats cheaper than losing the lens cap.Universal is perhaps not quite what this size is but there may be smaller/larger ones to purchase. .

Used these extensively over the last week on a 72mm & 77mm lens diameter and I love them. I often have my camera on a sling strap at my side and the standard lens cap was forever getting brushed off, this has solved that problem. They are quicker and less fiddly to remove/attach too. The only issue I could see is if you hit your lens head on fairly hard as they do not have the protective solidity that a standard lens cap has but this is mitigated if your have a filter on the lens.

I had previously purchased another cheaper make not wishing to spend so much. It was dismal and split in various areas within a few weeks, so a big waste of money. On suggestion of a friend and having handled their Curved lens cap I decided to go ahead with this purchase and first impressions are very good. Time will tell but I reckon this will be prove a worthwhile purchase and no regrets despite the greater cost.