Creality 3D Printer Filament Deep Red

he rainbow PLA+ filament arrived in a resealable package that kept it fresh and protected. The colors are bright and vibrant, high quality prints so far with the few easter eggs we printed as gifts for people. Performance & Usage: I've been using this filament for a few months now, and it has exceeded my expectations in terms of performance. It prints consistently with minimal stringing or warping, and the color remains vibrant. Pros: Offers excellent toughness and durability, easy to work with on my 3D printer, and produces high-quality prints with great attention to detail. Consistent performance, suitable for various 3D printing projects, and a reasonable price point about $22 /1kg Final Verdict/Recommendation: Highly recommend for anyone looking to achieve high-quality prints with their 3D printer, particularly those who value the importance of filament quality and consistency. It worked great in our Babbu Lab P1s! and Printed 6 of the infinite easter egg fidgets for Easter this year. These were a huge hit. colors are bright vibrant.

Picked this up mostly out of curiosity -- I run an AD5X with a 4-color AMS so I don't usually need rainbow filament to get color variety, but I wanted to see how the gradient transitions looked on single-extruder prints and whether the PLA+ properties were actually an upgrade over standard PLA. Short answer: the color shifts are smooth and the filament itself is solid. No clogs, no tangles out of the box, and the spool was properly wound -- something I don't take for granted anymore. Came vacuum sealed with desiccant, which matters more than people realize. Wet filament kills surface quality and this arrived dry. The PLA+ flex resistance is noticeable compared to regular PLA. I did a bend test on a thin-walled section and it took a lot more abuse before showing stress marks. For functional parts where you want a little give, that's worth something. Where the rainbow effect lands on your print depends entirely on your layer height, print speed, and model size. Smaller models cycle through colors fast; larger flat surfaces let the gradient breathe. It takes some experimentation to predict where transitions will fall if that matters to you. At this price point it's an easy recommendation for anyone who wants interesting single-extruder prints without dialing in a multi-material setup. Good filament, no drama.

Arrived in good shape, still had vacuum in both spools. Fair value of $18/kg. Print quality was great, used presets for it on a sparx i7 and it has a nice smooth surface on vertical and horizontal surfaces with a matt finish with a slight sheen. Adhesion was perfect. Easy to use right out of the package without drying. printed a large project with zero tangling or any other issues. supports functioned good with clean pull off. The color gradients are kind of large and I only got 3 colors on a fair sized project but the colors are good.

Great rainbow filament. Though I do wish the colors were closer together. It creates the rainbow effect, but its wider layers than I think I wanted. Still a beautiful filament and prints well

prints well. Made a bunch of toys for a birthday party and they were a big hit. I didn't dry it prior to printing and have not had any issues with print quality or adhesion.

Purchased this Filament mostly to see how quickly the colors changed , And unfortunately each color has a long print time I noticed that one roll had more blue on it than the rest of the color lengths I have use many brands of rainbow filament before and they have the same results ( long color print times ) Therefore you are forced to unroll the spool to get shorter print times . The other thing I noticed about these rainbow filaments Are the lack of colors this roll only container 4-5 of the Basic colors . I really wish this manufactures would consider faster color change times so I don't end up with a bunch of filament sitting around my desk . Out side of that there filament is great for printing i found it to be high quality and easy to print with .

Purchased the wood filament, because I wanted to print some items that are traditionally made out of wood and I thought it would look nicer using wood filament. Turned into an absolute disaster. This filament has been a nightmare to print with. I tried to print the same large item 4 times and wasted 40 hours worth of printing because the filament is wound incorrectly on the spool and it causes the filament to bind up and the printer would finish the print without filament. The first print I tried to do took nearly 7 hours to complete and around the 5 hour mark the filament bound up. These longer prints I run when I am not there. I will check on them periodically to make sure they are printing but unfortunately this spool just kept binding up towards the end of all my prints. The 2nd and third print failed around the 10 hour mark, where they would have completed just 2 hours later. Very frustrating to spend the time and have a print fail that is this large and is that far along. This time the same thing happened the filament bound up and the print finished without extruding filament. After the failure on the large prints I thought maybe I should try a shorter print, so I chose one that takes about 3 hours. The print finished and was successful, this got my hopes up that I was past the incorrectly wound filament on the spool. So I decided to try the 12 hour print again and I monitored it for the first 9 hours. Then I had to go to bed and sure enough around the 11th hour the exact same thing happened. Filament bound up and the print failed miserable. Half the spool has been wasted on nothing, except failed prints so into the garbage it goes. I tried to print 1 final item that was smaller and this time the filament clogged after 5 hours. I give up on this filament. This spool is obviously defective. The clog was strange after I removed the filament in there and replaced it with another filament I went through the extrude process from the touch screen of my K1 Printer and it spat out a dark liquid that was very sticky and the size of a jelly bean. After that it had no problem extruding black PETG or my Rainbow PLA.

I've been thoroughly impressed with the Creality PLA Plus Filament after using it for a 9-hour print session. The 1.75mm rainbow filament flowed smoothly with no tangles, and it worked flawlessly with my extruder, producing vibrant, detailed results. The ±0.03mm dimensional accuracy is spot-on, making it perfect for intricate designs like the vase and flowers I created (shown in the photo). The upgraded toughness held up well, and the colors blend beautifully. My only minor gripe is that it requires careful storage to avoid moisture, but that’s standard for PLA. For anyone into 3D printing, this filament offers great value and reliability for both functional and decorative projects.

I hands down will recommend using crealitys stuff hands down as the navy blue is amazing and prints come out soon smooth right out of the bag it comes in no drying or anything and it sticks to my bed very well ....I will not be using any other brands except creality on my ender 3 max neo

Belleza de filamento, se puede hasta tintar, huele a madera, se ve increíble

Esta genial

Llego rápido y bien, funcionó bien en mi impresora, pero no queda acabado de madera de verdad.