Siraya Tech Build 3D Printer Low Shrink Resin, Sonic Grey, 2kg

This is hands down the best resin that I have used. It works great for printing out small and delicate details and it's strong enough to use for functional prints. While so far, all of Siraya Tech's resins have been great, this one is my favorite and the one that I keep coming back to over and over. It was easy to get it dialed in starting off with their recommended settings with just a few tweaks. Printing everything in these pics using a Elegoo Mars 2 with great results. This resin is also a little forgiving of the temperature. I've printed at 20ºC without issue. You can also mix this with Siraya Tech Tenacious (90% Build and 10% Tenacious by weight in grams) to make your models a little more drop proof if needed. As long as they keep making this resin, I'm going to keep buying it!

Figured I would try this resin for some bolt on detail pieces for an r/c project, since it is advertised as being tappable, which is a BIG deal for what I use it for. I can confirm this resin does accept threads very well, whether it be by using an actual tap (preferred) or a self-tapping screw. My first print (an engine bay for a 1/16 scale truck), using the same settings I use on almost all resins, turned out so well I just ordered a second bottle, because I know I'm going to be using this resin often. Very impressed. And as previously noted, the color is more of a blue/purple translucent, it gets darker the thicker the piece is. Most of my prints end up painted so that's not an issue for me, I'm more concerned with it's durability, which seams to be FAR better than standard resins. Thank you SirayaTech!

This stuff is amazing. I was using Elegoo ABS Like 3.0 in grey and it printed small delicate details perfectly every time but was pretty brittle even on short drops. I printed the same parts with this Build resin and it has even sharper detail while being much stronger. It feels less flexible but I prefer a more rigid part anyways. If I need flexibility I might try blending some tenacious in but this is my new standard. The profile Siraya provided is perfect for my Saturn 2. The smell is also extremely minimal, at least compared to the Elegoo stuff.

Excellent detail but it's a bit brittle. I mix in 15% tennacious and get much better mechanical properties with no loss of detail. It machines nicely for secondary cleanup. I use gun taps in my mill to tap threads down to 0-80 with no problems.

siraya tech resins have always worked very well for me. after i ran out of siraya tech fast resin i decided to give anycubic resin a try and it had alot of failures in printing and was very brittle. both the siraya tech fast resin and their build resin are far more durable. as you can see from the pictures i printed some functional parts for my longer lk4 pro fdm printer. the color adds a unique look when parts are thin as the resin is a dusky translucent. then the solid parts have a very nice glassy black quality to them. siraya tech list this resin as tapable and it certainly is. the various fan shrouds and air ducts i resin printed for my filament printer had to be drilled and tapped. and all went well. this resin has good toughness and overall strength as well. very good resin for models and functional parts. all resin prints shown were printed on my longer orange 10 at .05mm layers and a 10.5 second cure time per layer. 60 seconds on bottom layers. edit 1/12/2020; i have since added some models i printed of the mandolorian a hollow bust, and a full figurine. i have also printed with this resin an xbox series x battery cover for a friend and some functional parts for my reloading table. it is still my Go-to all around resin.

So far, the easiest to use resin with consistent results.

Tried with default settings, poured straight into the vat in a 78* house, didn't work worth a darn. Tried again, warmed the bottle up for 30min in a sinkful of hot water and changed my print settings to match the spreadsheet on their webpage, worked beautifully! Printing on an elegoo Saturn, the smell is a bit strong, kinda like a salon doing perms. Have yet to test the print, but just carving away the supports with a pocket knife I can tell it's tough.

I got my first ever resin printer and could not get a successful print to save my life. I re-leveled the bed god knows how many times, tried lubricating the FEP film, tried changing the number bottom layers and exposure times, and nothing worked. Finally I decided to switch resins and since I saw some good reviews about siraya tech resin I figured I'd give them a try. My very first print after switching resins was a success!! I had been at my wits end thinking I'd never get to use my resin printer and their resin saved my sanity. They've earned a customer for life and I can't wait to try out more of their resins!

0.5mm以下の精度を求めないなら こちらのレジンはとても良いと思います フィギュアとか色々印刷してますが 印刷しやすいと思います 結構ずさんな設定でも失敗しにくく 硬さや靭性もそこそこあって壊れにくい とても良いレジンです

Great resin, one of the best for engeneering parts.

Excellent resin burns out pretty good Ideal for small to medium size prints

Très facile à utiliser, rétraction quasi nulle, pas d'odeur ou alors j'ai le nez bouché ;-) très résistante, bref j'adore cette résine pour mes pièces techniques qui doivent subirent des pressions de plusieurs kilos.

Da quando uso siraya non sbaglio una stampa Ottima viscosità e a quel prezzo è top Da provare pure la trasparente Per me è n.1 nel settore resine