Sculpd 70 ml Air Dry Clay Glaze - Gloss, Scratch Resistant and Waterproof Pottery Glaze, Gloss Varnish for Air Dry Clay

Works really well to make my air dry clay shiny once painted with acrylic

It gives a nice glazed finish to air dry clay pieces. I thought it was food safe when I purchased it but it is not. With that in mind the price seems high but I don't have experience with any other glaze products to compare it too. I do think I could achieve a similar shine with polyurethane for a fraction of the cost, possibly even mod-podge or pva glue.

Easy to use, good price, dries quickly with a nice gloss finish.

Did t work, was sticky, bottle was small and half full

It’s a good quality product, but it gives the same results as modpoge. It won’t give you that high gloss finish like it’s been fired in a kiln. The best thing I’ve found for clay projects is using resin and a UV light. That will give you the kiln fired look.

I’ve been using this clear varnish for sealing my polymer clay projects, and I couldn’t be happier with the results. The varnish applies smoothly and evenly without streaks or bubbles. It dries pretty quick. What I like most is that it doesn’t get sticky over time, unlike some cheaper sealants I’ve used.

Buen sellador, necesitas comprarlo, sella muy bien tus piezas de yeso para que el líquido de las velas no se pase

The lid was glued on it. I couldn't open it at all. Then I took some plyers to it. Do better.

Perfect for covering homemade clay projects. I used air dry clay and used this to cover and seal. Easy to use. Nice sheer layer over it. Dries really quickly too.

Laissez séché un peu avant d y apposé le papier doré

I have a reasonable amount of experience with clear coats/lacquers. I began in pottery (clay that is dried in a kiln) years ago, segued into thick glassy type top coats like ‘Pour On’ and am always looking for cost effective smart ass alternatives (Podge, Aleene’s, clear nail polish). I loved Pour On but I blended badly a few times and it never cured 😩 and nail polish is ok except for the smell! Sculpd was a pleasant surprise! The photos are from a project where I want a ‘high flake’ under glass top coat look (I saw a car at a car show that looked like a huge sparkle sticker but under wet glass years ago). I found Sculpd to flow very well, it self levels, it has no smell I noticed and it combined with both glitter and mica with no complaint (don’t mix stuff with it on my say so—I am very impulsive + cavalier in my art making choices!). The attached photos are after one coat only. Sculpd is NOT thick like Pour On. It IS thicker than Podge. If you want it to self level I suggest using lots with your item on a rack so the extra can drain off then give it 1-2 days undisturbed for a through and through glassy cure. The progress from self leveling to drying is quick: drying began for me 5-10 minutes after drip leveling. Cost: if you’re doing smaller projects buying this size will probably be fine. If you regularly need high gloss varnish for medium or large sized projects I recommend seeking a wholesale seller of Sculpd.

You can see the streaks and it dries weirdly. You can peel it off like latex..

Je suis tres satisfaites ! Je recommande il est de bonne qualité