JETech Screen Protector for iPhone SE 3/2, iPhone 8/7/6s/6, 3-Pack

I’ve ordered these screen protectors as a replacement after I had accidentally dropped my phone in the street and my former screen protector got all cracked. This set of screen protectors come well after packed and protected with clear instructions. Easy to apply and the screen protector doesn’t seem the affect screen sensitivity: in fact it does much better that the former one which I had installed for £15 in a repair shop! Only time will tells how effective it is at preventing screen damages in case of accidental drops and scratches.

At a price for three I was surprised, so easy to fit with zero bubbles, screen responsiveness unaffected.so far scratch resistant , seems durable and with 3 they are cheap to save an investment

Good delivery and product

Good product, arrived quickly and does the job.

Easy to install, great price

Really pleased with this item. 3 in the pack so it’s quite a bargain!!

Really pleased with the finished result. No bubbles. Perfectly clear screen. Touch all works fine. Only needed one of the 3 screens provided. Yes it is a smaller than the full glass area, but it has to be, because the phone's glass front curves away. But the fit is that good it almost looks like the phone's glass was manufactured that way. Needless to say, my suggestions here are in addition to the instructions that come with it! First thing I did was to check I had the correct part, given the packaging does not say what phones they are for. If you check the original Amazon description, the part specific to iPhone SE 2020 has a part number starting 0807, whereas the older iPhone 7/8/SE part has a part number starting 0806, so be sure you have the 0807 part. When it comes to fitting the protector, preparation is key. I used a freshly cleaned tray, with some kitchen towel on it, and with all the bits to hand. And I made sure to do it at a time when I was not pushed for time; this is not a job to feel you need to rush at! One thing I did that the instructions don't tell you, was to clean the BACK of the phone, to be sure the hinge stickers stay stuck on properly while you need them to. Did this with the cleaning swab and drying off cloth that comes with the kit. The hinge stickers stayed firmly stuck in place all the time I needed them to. Then with hinge stickers in place on the back, and with the screen protector aligned on the top, ensure to keep the hinge tapes slack-free when pulling them round and sticking across onto the protector; just tight enough to ensure no slack. Once the hinges are on, then double check - gently pull the screen protector to the left (assuming hinges on right) against the hinges, and check it is aligned spot on. For alignment I used the slotted hole at the top and the home button cut-out at the bottom. If not quite right then just adjust the hinge positions until OK. Once the phone's screen is dust free as per instructions, then after removing the protective strip, you can just lay the screen down, pulling to the left against the hinges as you do so - if you did the previous bits OK then it will be lined up perfectly. Yes there will be bubbles, but no worries - they are easy to sort and no need to rush when sorting them. As the instructions say, just gently lift corners, then smooth the bubbles back out towards the corners again. Took a few goes in some cases, but it did work well. Very pleased with the finished result. Been in my pocket a few days now, with no sign of any scratches so far.

Agreed with other reviews: I am very good at applying these glass protectors, no dust, no bubble, no stress - but this one was a disaster. I first tried with the "hinge" method suggested by the vendor: stick your screen with the protector like the cover of a book to your phone, then remove the film and just drop the glass exactly where it should be - I failed, but that can be on me. I then tried my usual way (align by eye and drop the glass straight down) - never did I see so many bubbles on the surface. I cracked the corner of the glass just lifting it to adjust. Thankfully there was a second one - I went straight for the fitting without the hinging - just as bad. I then realised this is not the brand I usually order. Well, that explains that. Waste of money. I may try the 3rd and last one later though. -- EDIT A few hours later, I checked my phone again and the bubbled were all gone! I updated the number of stars. Still a weird experience and one wasted screen but the second one worked (after giving it a few hours).

Jamais déçu avec ces protections d'écran ! Ça fait plusieurs fois que je les prends et à chaque fois la robustesse et la qualité sont au rendez-vous. Elles sont de plus très facile à poser avec le matériel fourni.

ok

Muy bueno, pero queda muy justo a la pantalla, queda tan justo que se notan líneas en los bordes, en general buena calidad. Actualización octubre 2021: MUY RESISTENTE! Le he dado unos golpes fuertes en la pantalla, se me cayó sobre una roca de frente y la micra sufrió daños pero la pantalla intacta, cumple su función de protección a la perfección, me ha salvado de que la pantalla del iPhone se rompa a pesar de que está justa como dije cuando la compré, eso sí, unos milímetros más al borde y la pantalla no la cuenta porque como dije queda con cierto margen la mica, el touch sin problema al usar el teléfono, la calidad de imagen se mantiene y ya pasó más de un año y esta mica sigue estando servible a pesar de estás muy agrietada de golpes que repito han sido fuertes y no solo caídas leves, lo recomiendo muchísimo, ojalá pudiera subir completamente los borde de la pantalla pero por la forma circular del teléfono entiendo que es mejor así

Ya estaba harta del protector que tenía que era como plástico (venía con el protector Otterbox) ya tenía muchos rayones y no respondía bien. Se lo quité a la funda para instalar éste. Trae 3 micas el paquete, se sienten bastante bien y creo que tendrán buena durabilidad. He usado estos protectores en Ipads y funcionan perfecto. Le quedó como anillo al dedo al iPhone 6 ese que se lo quería instalar. Nada más asegúrense de pedir el tamaño correcto para el equipo que tienen. Hay otro paquete que tiene el mismo costo pero en lugar de traer 3 micas trae 2 y un aplicador fácil. La verdad fue fácil de instalar aunque revisé las instrucciones un par de veces para estar segura de cómo se aplicaba. Me queda una pequeña burbuja el centro que no salí al presionar así que seguir la recomendación de las instrucciones de levantar de una esquina y listo! desapareció la burbuja. La funda sigue cerrando muy bien con la nueva mica.

I started buying these JETech screen protectors because my granddaughter somehow manages to crack the glass on her iPhone on a regular basis. After going through several expensive screen repairs over the years, I decided it made a lot more sense to keep a supply of these tempered glass protectors ready to go — and honestly, they have saved us a lot of money and frustration. The installation process is simple, even for someone who is not especially patient with phone accessories. The protectors line up well, adhere cleanly, and usually go on without bubbles if you take your time for a minute or two. I also like that the pack includes multiple protectors because accidents definitely happen in our household. What impressed me most is that the protectors themselves absorb a lot of the impact. We have had several drops where the screen protector cracked, but the actual phone screen underneath stayed perfectly fine. Replacing a protector is obviously much easier and cheaper than replacing an iPhone screen. The touch sensitivity and screen clarity are also very good. Once installed, you barely notice it is there, and it does not interfere with normal use at all. For the price, this is one of the smartest little purchases you can make if you have kids, teenagers, or honestly anyone who tends to drop their phone. I will definitely keep buying these as long as my granddaughter keeps testing gravity with her iPhone.