Sovol SV06 3D Printer Open Source with All Metal Hotend Planetary Dual Gear Direct Drive Extruder 25-Point Auto Leveling PEI Build Plate 32 Bit Silent Board Printing Size 8.66x8.66x9.84 inch

Es muy lenta en la fabricación de algunas piezas

Muito boa, muito bem embalada, fácil montagem, excelente qualidade.

tive azar extremo na minha unidade por ter vindo com uma mesa empenada, porem o vendedor se prontificou a enviar um kit para fazer os devidos reparos. Estou em aguardo e retorno novamente após tentar os reparos, apesar disso, a impressora é muito boa, nas impressões que consegui (nas partes da mesa onde não estavam desniveladas) a resolução de impressão me forneceu peças muito bonitas, e a garantia parece ser de extrema qualidade tambem.

Es muy versátil y fácil.de usar pero me da mucho problema, primero compré una y se desajusto echando a perder una boquilla y la cama y confíe y la volví a pedir y ahora el hotend se tapa a cada rato, y ahora ya no sirve el hotend de tanto que lo abro terminó rompiéndose la boquilla quedando dentro la mitad lo tendré que cambiar 😡😡😡

I've been 3D printing since early 2021 and looked at many different 3D Printers and narrowed down it down to the Sovol SV01 (Classsic) to be my 1st printer because I liked the features offered for a good price and their customer service. During my 2 years of printing, I learned a lot and had been enjoying printing since. But......I quickly realized that a 2nd printer would greatly help when printing large multi-object prints and multiple colors. I looked at many printers and kept going back to Sovol’s website and was eyeing the SV06. I saw Sovol’s announcement of the SV06 late 2022 and really liked the features it offered but kept contemplating on making a purchase for a 2nd printer. 7 months later, I decided I was ready for a 2nd printer and purchased the Sovol SV06. I’m glad I purchased it.Upon opening the packaging, I noticed it was packaged extremely well! Each component was packed into its own compartment and all the screws/bolts bags are labeled making it easier to assemble. If your new to the 3D printing world, then this is an excellent printer with very little effort in assembling. The entire process of assembling took me just under 30mins from unboxing to turning it on (I took my time reading through the guide and tightening all the screws/bolts). There is also a guide that was included with the packaging with pictures and there are videos online on how to assemble it. The guide is very detailed.Once I got it all assembled and also got the auto z aligned & bed leveled, I started by printing the benchy included on the sd card but got half way through it and realized the nozzle/hot end was angled severely which may not be a problem for small prints but a huge problem for large prints. I took the extruder off the mount (so much easier to remove than my older SV01) and looked over it. I contact Sovol’s support and they were extremely helpful. They provided a replacement and links to videos and information & once I received the replacement parts it was easy to fix the issue.Pros:• The biggest pro that I like about this printer is the Bed Leveling feature. Unlike my SV01, I would have to level it every few prints even after adding the silicon pieces instead of springs. With the SV06, the bed does not have any springs or silicon pieces. It slides on rods and includes an inductive sensor. I included the G29 command in my startup gcode and it checks the bed before printing.• I like the size of this printer. It is smaller than my Sovol SV01. Its not to small but not to big. Its a good size that will allow for printing almost anything. If your into printing cosplay helmets they you may have to cut up parts and print multiple parts. For me I’ll probably print helmets on my SV01 and print all the small misc. pieces on my SV06 so I can complete them much quicker.• The extruder is extremely easy to work with. With my previous SV01 I would have to move the gantry to the very top to give me room to work on the extruder and sometimes maneuvering to get a good angle to work on it. With the SV06 there’s 3 screws to undo and remove the wiring clip and its free to work on. Wish this was feature was around on my SV01.• Prints PLA, PLA+, PETG, TPU, ABS, ASA, Nylon & etc... I mostly print with PLA, PLA+, PETG & TPU. I haven’t tried TPU on the SV06 but PLA, PLA+ and PETG print extremely well.• Filament change from the printer is very easy compared to my SV01. Its easier to navigate through the menu to find the filament change.Cons:• Loading filament was a little tricky the 1st few times but after several attempts its become much easier than my SV01. There are videos on how to properly load filament that should help.• The size of the bed. Even though for me its not a con since I have another printer that I can use but if this is your 1st printer that may be an issue. Its build plate says 235mm x 235mm but the actual build plate size is 220mm x 220mm. Wish Sovol would had adjusted the wording on that since it can cause some confusion. If this is to small you could always go with a SV06 Plus that has a bigger bed.• I’ve read online that others experience the bearings being very loud. I experienced the same issue but used some specialized grease and fixed the loud sound. This can be an issue if you don’t have specialized grease to fix it. It should be something Sovol should have fixed before sending them but not a big deal. Just something to think about when purchasing.• Still uses a micro sd card and a micro usb. Wish this used a USB-A or USB-C connection but not an issue for me since I had an extra Raspberry PI running Octoprint connected to my SV06 using a micro usb cable. Also something to think about when purchasing.• No Run out Sensor offered. I never used my run out sensor on my SV01 since I problems getting filament to load into it so for me its not an issue. I just keep an eye out on how much filament I have loaded and guestimate on when I need to change it.• No color display like the SV06 Plus but for me its not to much of a problem since I’m use to it on my SV01.I’ve only printed a few test pieces but so far the SV06 has been a great printer for the price. If this is your 1st printer then I think it will be a 1st good printer or 2nd/3rd/etc… printer. Its very easy to use and is loaded with a lot of features that I can’t wait to start using it more! I like it so much that I may have to get another SV06 so I can print more!