HONE Stick Welder 110V, Actual 120Amp Smart Hot Start Arc Force Anti-Stick Mini Portable Welding Machine, Digital IGBT Inverter LCD Display ARC Welder, High Efficiency for Welding Rod 1/16-1/8-Inch

I’ve been looking for a reliable welder for some projects around the house, and honestly, this thing exceeded my expectations. If you're looking for something that just works without a bunch of setup headaches, this is it. Everything you need is included The first thing I noticed was how complete the kit is. It comes with the stick holder, ground clamp, and even the power adapter. Usually, with these budget-friendly machines, you expect to have to run to the hardware store for a missing cable or adapter, but not here. I opened the box, plugged it in, and was ready to work in about five minutes. It’s a true "plug-and-play" setup. Super easy to weld As for the performance—it’s surprisingly smooth. The arc is very stable and starts up effortlessly, which is a huge plus if you aren't a professional welder. I’ve tried it on a few different thicknesses of steel, and it handles them like a champ. It doesn't "stick" nearly as much as some of the older, heavier transformers I've used in the past. Portable and Versatile It’s also way lighter than I thought it would be. You can easily carry it around the garage or yard with one hand. The dual voltage (110V/220V) is a lifesaver too; I can run it off my standard wall outlet for smaller fixes, but I have the option for more power if I need it. Final Thoughts For the price, you’re getting a lot of value. It feels sturdy, the fans keep it cool, and it hasn't tripped my breaker once. If you’re a DIYer or just need a dependable backup welder for the shop, I’d definitely recommend this one. 5 stars.

This thing is awesome! I’ve never used a stick welder before and I love it. Perfect wields for a beginner friendly machine. Seems to be well made at a great price. Really simple to weld different thicknesses and I’m hoping it last a long time because it’s my new favorite machine. I have multiple mig’s this is easier

Surprisingly this little welder did ok off of my 4400 watt generator. They even include a rudimentary face shield. It came with rods. they work. If you order this machine, I highly reccomend you get some hobart or equivalent 6011 @ 3/32 diameter. It works so much better. all in all i’m happy with it.

I have welded for 20 years, 7 of those years I welded professionally. I compared this welder side by side to the Tooliom 135 A mini stick welder as well as a 300$ 110v Century arc welder. The Hone welder is very comparable to the 300$ Century but it outperformed it as the 300$ century wouldn’t run the same rods as well. (Was a close match-up) The Hone welder was significantly better than the Tooliom as the Tooliom ran rough with the rods and it was difficult to get the arc started at times. This Hone welder will run 1/16 and 3/32 rods like crazy! Super smooth. It will also run 1/8 rods but is on the cold side for those rods and the arc will occasionally go out (same as the 300$ Century welder) A 7 year old could light up an arc with the aid of the hot start, anti-stick and arc force features. It blew me away how easy it is to light and keep an arc alive with this Hone machine compared to say a Lincoln toomstone welder or a miller dial arc that dont have the new technology built in. For the Money and weight of this machine it is a no brainer. I wouldn’t Hesitate to buy it even for (light) professional work….if it breaks after 5 years just buy another one for 70$. I do not recommend it for heavy duty applications. I recommend upgrading the leads to something longer and the rod holder and ground clamp to something better. However, if you are a novice welder they will work just fine for a few years of learning and practice.

Good little welder for small things and hobbies doing metal work. It runs 7/32 6010 and 7018 like a champ. I wish the welding stinger lead was about 3 feet longer, but for 50 bucks I’ll take it!

This was my first time using this welder. While it’s been some time since I last welded and I’d rate my skill level around a 3/5, the welder itself performed extremely well. Arc starting is very easy and consistent. I had no trouble striking an arc and achieved good penetration on 1/8" plate steel using a 3/16" 6013 rod at just under 40 amps. Welds were stable and predictable. I also used it to fill a hole in scrap plate steel left from a cutting torch. The welder handled the repair easily at 40 amps, and I believe a slightly lower setting would have produced an even cleaner result. The unit is lightweight and highly portable. Despite its size, it has more than enough power for the work I tested. This makes it especially useful for jobs where larger welders are impractical or where a 30-amp circuit isn’t available. One feature I appreciated is the built-in circuit test, which confirms adequate power before indicating readiness. This adds a level of safety and confidence when plugging into unknown outlets. The included stinger and ground clamp are better than expected. The stinger grips rods securely, the ground clamp provides a solid connection, and both cables are of adequate length. Connections to the welder are secure with a push-in, twist-lock design. Note: The manufacturer recommends using a main power connection. I ran it on a fairly loaded 20-amp circuit without issues. I plan to test it next with a small portable gas generator. Overall: Very satisfied with the performance and portability. I would purchase this welder again and will update the review after additional use.

I’ve never welded. Totally beginner using only YouTube to learn how to arc weld. This machine did exactly what I needed - modify a motorcycle pedal. Took me a day of practice, and it was a lot easier to learn on this than I anticipated. The welding mask is terrible, since it requires you too hold it to use, so you can’t use both hands to weld. But for this price point, I won’t knock it. I did use it for my first initial welds, just to get started. My welded motorcycle brake pedal works great!

I bought this to weld 3/16" and 1/4" steel plate using 3/32" rods which have a recommended current setting of 70-90A. I tried everything from 70 to 100A but welds just beaded up and made poor or no actual connection. Finally used my Fluke clamp meter to check amperage and, at 100A setting, the welder only produced 53A. I turned it up and at 150-160A I was getting 80-85A and, presto, the welds were beautiful. I got an exchange and the second unit was somewhat better, giving 63A on a 100A setting. I am keeping this welder because I can use it but I know I need to check the actual current and adjust accordingly. The display is way off but after you figure out what works, it helps to return to that setting. There is no way this welder will put out 205A but, luckily for me, I shouldn't need more than 100A which it will produce. I appreciate the extras included as well. Overall, disappointing that the display isn't accurate but a solid little tool for smaller jobs on steel up to 1/4". I was worried I might throw the breaker on my 20A circuit so I guess it's a good thing this doesn't approach 205A DC.

Muy buen producto,lo use para soldar

Es muy práctica