LIAN LI High Airflow ATX PC Case, RGB Gaming Computer Case, Mesh Front Panel Mid-Tower Chassis w/ 3 ARGB PWM Fans Pre-Installed, USB Type-C Port, Tempered Glass Side Panel (LANCOOL 205 MESH C, Pink)

I used the Lancool 205 Micro case for my first PC build and I couldn't be happier! It's an amazing micro case and I absolutely loved how it turned out. I'm not at all an expert in PC building, but I hope that my feedback helps a bit! Here are my specs - GTX 1050 - GIGABYTE B550M DS3H - Crucial Ballistix 3200 MHz DDR4 - ARCTIC Freezer 34 eSports DUO - GIM KB-28 RGB Case Fans, 3 Pack White 120mm - EVGA 220-G3-0750-X1 Super Nova 750 G3, 80 Plus Gold 750W - Seagate BarraCuda 2TB Internal Hard Drive HDD - Crucial MX500 1TB - AMD Ryzen 5 3600 Pros - Really easy to work with - Lots of different ways to route cables - Simple and minimalist design - Micro tower is small enough to fit on top of a desk without looking too big - Air flow on the back, top, front, below the psu, and on the sides of the front panel (enough to fit total of 5 fans // 1 fan in the back, 2 fans on the top, and 2 fans in the front) - Removeable Magnetic dust filters on the top and the bottom - Fits the ARCTIC Freezer 34 Esports (grey/white) PERFECTLY, goodness I was worried that my cpu cooler wouldn't fit, but it fit absolutely perfect with a tiny bit of room between the tempered glass and the front of the cpu cooler - the gap in the front is big enough to fit a custom rgb panel - the temps are nice! my GPU runs around 35-41°C - the glass feels very high qu (it's pretty heavy too!) Cons - I wasn't sure if this was the motherboard or the case (maybe it was just me?) but I found it very difficult mounting the motherboard onto the case. When I would screw the motherboard onto the case, I just could not get them to go inside. I managed to get the corners in, so I left it at that. This may have just been my fault though and I didn't want to strip the screws :'( - This is me just being a little picky, but I wish the little raised cable management things in the back of the case (I'm not sure what the technical term is) was slightly larger to fit bigger zip ties and velcro cable ties - I wasn't sure if the case was supposed to come with a mounting tray, but mine didn't come with any (I'm still not sure if the mounting is included or not) so I put my HDD in the drive bay and I placed my SSD right on top of the drive bay and zip tied it down Overall, the microATX case is absolutely beautiful and very well made! It's user-friendly and great for beginners that want a smaller build!

This was my first time assembling my own build, and aside from some skill issue/inexperience on my part, this was such a novice friendly case! The screw holes are all great fits and the metal seems good quality, there were so many extra parts included, and they even came in a cute little plastic box with customizable dividers! I think my one gripe is that there doesn't seem to be a whole lot of room in the back for my chunky PSU cable, especially with the slightly cursed cable management on the pre-installed fan hub. I ended up mounting my SSD to the back of the case and completely yeeting the HD cage underneath, which gave me significantly more real estate and it all worked out. One thing I love is that there's more than enough from for my thicc ass GPU (Gigabyte RTX 3080 Vision) which was a pain point in my last case. I wouldn't recommend anything larger, though. I've noticed a significant difference in my airflow and temperatures as a result of this case, even when I'm gaming. If you're looking for a mid sized ATX tower that's cute and budget friendly but still with good airflow, this case won't disappoint.

I got this case on sale for $80 at the time and would highly recommend it. I wanted a white case that had a glass side panel for a good price, and this was it. The case was easy to put together, and all components fit perfectly in the case. I'm running a 3060ti for reference in the pictures, but the case will fit the other 30 series Gpu's that are larger as well. Airflow is overall great, the front of case has holes down both sides to allow more airflow to be pulled in from the front fans, and I use the top and rear fans for exhaust. Each of the sides has a magnetic dust filter (top of the outside of the case, bottom of case for power supply fan, and front case fans have a dust filter behind the front white cover piece of the case). The only gripe i have about the case has to do with the fans. The front and top case fans are screwed into a bracket that slides into place, so you screw the fans into the bracket and slide the bracket into the case. The problem with this is that it just created extra moving parts that seem unnecessary. Would much rather just screw the fans directly into the case itself. Other than the case is great. I love the mounting for the 2.5" SSD drives, they are on the opposite side of the case (behind the solid white side panel) and slide up flat against the case so they are easy to add or remove ( there are two slots) without taking everything apart. Case also comes with a bracket used for adding normal size HDD drives in the bay where the power supply sits, but i don't use any so i took it out to shove all my extra cables into. The glass panel has some tint to it as well which is nice.

خامة محترمة و تقيلة و شيك

The case itself looks stylish and simple. I like that you can control the lighting with a button on the case and the program itself. Airy and cool. I recommend!

mesh olan modeli geldi uğraşmamak için kullanmaya devam ettim.

Very good looking case, good airflow and very sturdy/well built. Second Liam Li case I've built in and can't say more about how good they are. Only niggle is the instructions are a bit unclear for AIO mounts but not hard to work out

جميل جدا وتهويته ممتازه و اضائته جميله بس ملاحظه ما ينفع للكروت الكبيره زي الجيل الرابع 4080 وغيرها و ما يكفي مذربورد كبيره