Autel TPMS MX-Sensor 315+433MHz Dual Frequency Tire Sensor, OE Quality

These sensors are awesome. Installed on a 2010 Toyota Tundra. Batteries died illuminating the tire light for no reason other than dead batteries. Old sensors were TRW. Now the most important part If you do not own a Autel TPMS programmer do not even think for a second these will ever work for you. I bought a TS508 with free for life updates. Even if you have no intentions of doing this kind of work the programmer is sweet you can walk around most cars and get a pressure reading with out doing anything. check your tire pressures in seconds. or do a relearn if you are rotating. Now for programming super duper easy. The issue is if you have dead batteries You might need to manually add the hexcodes to the programmer TRW has them printed on the outside of the sensor. I ended up warming up the sensor to get the last breath of life out of the old sensor. The easiest way is check all 4 sensors the programmer will store the hexcodes automatically. Then carefully 1 by 1 start programming the mx sensors keep them well away from each other so you only program 1 hexcode at a time. The programmer activates the battery and then writes the cloned hexcode to the MX sensor put on the truck and never see the tire light again. I did not use the obd2 function nor the manual function on the tundra as i got the old sensors to report the hexcodes one last time however im sure its just as easy. Another disclaimer I have my own tire machine so breaking the bead is necessary to remove old sensor and install new sensor. If i was a home gamer without a tire machine i'd use a something like a handyman jack and break the bead and then put pressure near the sensor area to gain the access necessary to take out the old sensor and put in the new one. another tip break the bead completely before you put any pressure near the sensor or you will break the sensor. which if you do break one you will need to dismount the tire to get the broken sensor out. You dont need a tire shop to install these if you use common sense, but you must have the autel programmer if you buy these.

Excellent product. Worked as advertised. Easily programmed.

Used this with a Nissan Frontier so that I could do a 5-wheel rotation (need to relearn the wheel positions each rotation). Added it to the 5th wheel. Tire shop wanted $75 for sensor plus $30 to install. You can use a bottle jack, a block of wood, and a hitch mount to unseat the tire enough to get at the valve then install this one....just don't drop the TPMS into the tire before you thread the mounting nut on. You'll need to get the tire rebalanced after installing. In my case America's Tire balanced it for free since I just brought the wheel and they didn't have to take it off the vehicle.

I knew I was having an issue with one of the TPMS sensors on my 09 tacoma. I took out the autel and tested each one and found the one which had a low battery (it was a replacement wheel so makes sense that it was the only one which was low). I had the tire place swap the sensors and install my new tires. I had them save the old sensor for me, as this was the first time i was doing this and wasnt sure if i would need it to clone when home. Because I had already scanned all the sensors I was able to just clone it in the tablet without the old sensor. On the drive home the TPMS light came on randomly and i thought it was odd until i realized that the system was seeing two sensors with the same ID and thus it was confusing. I took the sensor out of the truck and have not had any issues since (about a month now). Would definitely buy again.

Bought 5 of these sensors (including spare) for a Lexus LS and after 1 year they started failing 1 by 1. If I could give zero starts, I would. The tires outlasted these sensors. Absolute waste of money junk! Going back to OEM Lexus sensors. The Lexus OEM sensors cost more but last around 10 years, saving you money in the long run!

Good product had it on my car for almost a month and works great hopefully it stays that way

Easy install - paired right up to my 2016 F-150. No issues, and showing accurate PSI on all four corners.

I got the sensor but not with the 2024 chip. I like autel products.

After configuring worked perfectly my bmw g12

solid build, used 12 of them already, not a single problem

Works

I used the autel TS508WF to find out i had a bad sensor on one of my wheels.. i got this MX sensor as a replacement, I used the tool to program the new sensor and got a tire shop to then install it.. worked great, no issues so far.. very happy with it and much cheaper than sensor sold from the dealership

Great product