SUPALAND Keyless Entry Remote Control Key Fob Replacement Fits for Chevy Cruze Equinox Camaro Impala Malibu Sonic Buick Regal Verano Encore Allure Lacrosse GMC Terrain 2010-2021 OHT01060512 13504200

I chose this one because I did not want to swap the battery and the circuit board. For the difference in price it was not worth the trouble. Be sure you can get your old key blade off before you order any of these, unless you are planning to have the new key cut.

Worked great! Followed a video and webpage to swap the key blade and the transponder and it worked! Ordering a second one. Bought for a 2011 Chevy Cruze. Was fairly easy for someone who's not mechanically inclined at all. Would recommend!

Works perfectly as a replacement of the original key for a Chevy Sonic LS 2017.

The buttons broke out of my old control, so I purchased the SUPALAND Keyless Entry Remote Control Key Fob to replace it. We have a 2105 Chevy Cruze and I was skeptical that it would work. It seems to be of a good quality. It looks basically the same as the original fob. We didn't have any trouble synchronizing it. The only problem is that the setup was a little harder than we expected. We had a hard time getting the little pin out so we could replace the blank with our key. It works great though after you get it changed out and is compatible with 2015 Chevy Cruze. I imagine it is way cheaper that getting a GM replacement and I would purchase again if needed.

This is a replacement for the 1st fob I ordered, which I returned due to the "Lock" button being permanently pressed in when I received it (obviously a used/returned item). Amazon did replace it with one that seems to be new/unopened. After testing all the buttons, the "Lock" button does not seem to have the same audible "click" like the other buttons when pressing it, which seems to be a defect in the manufacturing process. However, I need a spare key, so instead of returning it, I took my original key from my broken fob and swapped it to the new keyfob. Programming was very simple...use a working key & fob (do not start the engine), turn the key until lights on dash come on and then go off by itself , then remove the key/fob, and within 5 seconds, insert the new, unprogrammed keyfob, turn the key until the dash lights come on then go off. Then, start the engine, I let my engine run for about a minute or so. The new fob should now be programmed to work the trunk and doors. If you do it this way, there is no need to have a new key lasercut. Note: when placing your old lasercut key into the new fob, you may have to spin the laser cut key counterclockwise once to put tension on the spring, then carefully close up the fob. This will insure that your key will "snap out" from the fob correctly. I used all the "key" parts from my old fob for proper fitment. You tube videos are helpful too.

Worked great, no issues with a 2012 Chevy Cruze Eco keyed version. Much cheaper than dealer or some other sources. Key cut by locksmith, self program per online search instructions. Good value.

It is a key that was easy to program since I had another working programmed key. It was a challenge to take the old cut key and fit it into the new shell because the groove that the key sits on did not line up and had to manipulate quite a bit. You get what you pay for. Because it doesn’t line up the pop mechanism doesn’t work but can pull the key out still manually.

Good key fob worked perfectly exact match and good price. Easy to install and the look is original

Me gusto la calidad del producto y me llego antes de tiempo !

Worked well with 2011 Cruze after dealer cut the key. Programming worked from first time.