ECOTRIC Universal Motorcycle Cruiser Front Outer Fairing Batwing w/Clear

I was skeptical when I ordered this fairing. With the price 75% less than the name brand options, I thought it may be cheap and small. I was pleasantly surprised, the size and quality exceeded my exceptions. The photos do not do this fairing justice. It looks great, was easy to install, fit perfectly, and holds firm. I just installed it today, total install time was approximately 45 minute. I've only gone on a 1hr test ride so far, but it was great. I am 6ft 3in and it kept the wind off my body and face. I haven't taken it on the freeway yet, I have had it up to 55mph and it did not rattle or shimmy at all. There are no instructions included. Installation was not a problem for me, the top clamps fit well on the handle bars. The bottom clamps I just flipped the bottom bracket and it secured to the old lower bracket from an old Memphis Shade windshield mount. I rode this bike for over 10,000 miles without a fairing or windshield, this addition has been great. For the price, you can't beat it.

After opening the package, everything was there that was needed no installation directions, but it’s not very hard to install. If you are somewhat mechanical inclined I will note it’s only a four star due to the windshield itself having some distortion at the top side about an inch to 2 inches making everything look weird other than that for being $100 batwing. I am actually pretty happy with it. I have hit 80 on my bike and there was very little vibrations. I would say it is pretty sturdy. just a note for the pictures. I do still have some adjustment to do on it as well.

I purchased this for my 2013 Honda VT1300CSA Sabre. I originally bought it as an experiment to see if I would even like a fairing on my bike, and I've come to REALLY like it. It is made of plastic, but the finish is great. I think I'll eventually paint it as I feel the plastic may show scratches at some point and I don't believe I'll be able to do anything about it. That's not a specific fault of the fairing though. Anything plastic that will see road time would do the same. The upper handlebar mounts didn't work for me, but that's only because my bars are a larger diameter than most bars. I was able to find some roll cage/bar mounts (that would normally be used for mounting off road lights to a roll bar) that worked perfectly and allowed the rest of the upper fairing mount to work. The lower mounts happened to fit perfectly on my headlight mounting bolts. I adjusted it up & down, forward & backward, tilted up & tilted down several times before I got it to where it does a great job with wind coverage. I did have some issue with helmet buffeting, but after really digging into the cause of that, I bought some wind deflectors and installed them on the front forks, and that fixed the issue 100%. It was simply wind coming from underneath the fairing and over the tank, and was not the fault of the fairing at all. I now have the fairing mounted a few inches further back than what the pictures show, but this should give you a good idea on what it looks like and how I used the bar mounts. I am 6' tall and the top of the windshield is about 2" below my chin. I think that if the windshield was about 2" taller, it would provide just a bit more wind coverage, it would still be below my line of sight, and it would be perfect. I did end up having a problem with the hardware for one of the upper mounts, but after contacting the company, they took care of me and the issue immediately. Couldn't be any happier or more appreciative of their attention and help! I think this fairing is a fantastic option for a universal fairing at a great price. I've got ZERO regrets on my purchase and would recommend it to anyone.

I don't do reviews but I have to give credit where credit is due. I received the product fairly quick, unfortunately it had a scratch on the clear windshield. It fit on the bike great with a little finagling but that is to be expected from a universal product. I reached out to the company regarding the scratch, and to my surprise, very promptly responded and shipped out another one. Not a clear windshield but a complete unit, and for that I have to give them five stars and a job well done.

Received a used windshield in a very flimsy crushed box delivered by UPS. Fairing was in good shape but the windshield seemed used and was probably cleaned by a chemical spray instead of mild soap and water so its permanently hazy with a few small scratches off to the side of the shield. Good that the shield is low so I don't have to look through it on my VTX 1800. Some parts were scattered in the box but all was there. No instructions and so you need to savvy mechanically to make it fit. I went cheap, you get what you pay for, so a lot of tweaking after test riding. Most likely will try to modify with new connecting rods and clamps or bite the bullet and get VTX full outside/inside fairing (windshield sold separately) for $500. I have a feeling that the first rock at hwy speed will severely pit or crack this thin windshield. Not sold by Amazon free return policy so shipping costs not worth it from 2nd or 3rd party sellers. I like the shape of the fairing so making it fit right is the goal.

Product came packaged in a sturdy box, no instructions but it's pretty self-explanatory. I have it mounted to a Suzuki Boulevard C50 and the installation was pretty painless. I ended up running the bottom set of mounting posts back up to the handlebars with the existing hardware I had for my old windscreen I think it's a lot nicer than mounting near the headlight. I have a good amount of room on the front where I can install some Cubbies or pockets for storage and I plan on running a flat panel in between the two bars to mount the tablet for maps. It's a nice glossy black it matches my bike really well and it's very sturdy up to 95 mph no problem. Doesn't quite cover my hands the way I want it to but I guess I can try adjusting it a little lower or raising my handlebars up a bit, that's what you get when you buy a universal windscreen. The only major issue I have is the clear windscreen itself, there's a very large noticeable warp or Distortion towards the top of it that is directly in my normal field of view so whatever I'm looking at is either slightly squished or slightly taller as if it has a funhouse mirror type of effect. It's very distracting and if I were to position my eyes above the screen obviously I'd have no issue or if I were to look directly through the center of it it would be okay, but I can't imagine it's supposed to be like this. I reached out to the seller maybe I got a defective molded windscreen. If I can't get a replacement from them I'll see if I can find something else that will fit. UPDATE: the seller sent a replacement unit, and while this was not warped like the first one, it came in slightly scratched. Oh well, I can live with that at least. Keeping at 4 stars for the sellers quick response, would have made it 5 if the replacement came in good condition

This is a good quality Fairing and looks and functions like ones twice the price. It does come with the handlebar mounts and some L brackets for the lower mounts but this is where each installer will need to get creative as there are not too many places to attach the lower strut supports. I had relocated my front turn signals so I was able to use the old signal mounting holes with the provided L brackets and it worked like a charm. It looks great and is very sturdy. Oh and just an FYI, the rubber grommets are punched so to be used in installing the windshield. No instructions are provided so expect to do some trial mock ups before doing the final installation.

First off it did give my bike a different look I like that you can put it on just about any cruiser. My only complaints is it changed the way my bike drove. Also the wind whips around it. I like to dip but not with this thing. I sold the bike not long after purchase but if I still had it I would have put my wind shield back on.

Tres satisfais, va tres bien sur ma v-stars 650 classic,facile a installer..!

Esta muy padre el diseño, el acabado es bueno

Not bad at all ! Except for the fixture on the handlebar that should have 2 sizes ,,there is only 1 size. Hardware are not bad, Plastic finition is surprising ! i am quite satisfy. Yamaha Vstar 650

Trop hot sa donne du style a ma moto

Windshild is most definitely universal did have to do some modifications to hardware in order to fit my bike 2003 1500 nomad. Also, windshield had some (3) imperfections into paint. I will have to fix as seen in pictures