PCIe SATA Card - 24 Port, 6Gbps, Supports 24 SATA 3.0 Devices with Cables & Power Splitter

Plugged the device in, plugged a drive into one of the ports, and voila, a drive was born! sadly the cables that come with the device are all straight when having 90-degree cords would have been ideal. Probably more for a server, but whatever. I ended up getting it because my mo/board only had 6 ports which would have been fine but two of them get taken if I use the second m.2 slot so I am left with four. Newer boards only have 4 so by that logic, I will need more ports at some point. I made sure to get the smaller x1 so that it will fit in any board I get later. My current board only has 3 x1's and 2 x16's so I wasn't willing to sacrifice my only other x16 for more sata.

Work excellent in my Dell optiplex 9020 pc that u used to host a proxmox server.

I've been using the PCI-E 20-Port Card for about 3 months now, both on Ubuntu and Unraid. To install, I attached it to my motherboard and everything just worked; the driver is pre-installed on Linux. So far, I've attached 5 drives with no issues. One word of warning: make sure that every attached drive is SATA 3. I inadvertently attached a SATA 2 drive and that caused all the drives to be unrecognized by the OS. I'll be adding more drives soon and will update this review if I encounter any issues.

Hi,I have now had 2 of these units fail:Purchased December 3rd 2023, it is now Feb 16th 2024, and the unit has failed after only 2 months of use.Both units were correctly installed and connected to approx 16 drives, and then after some time (2 to 3 month) a number of the drives become inaccessible and unrecognized.Replaced with a different sata card and the drive all returned to normal function.Would not recommend this product.

Well it does work. Just not to spec. Doesn't come close to SATA 3 speed.I'm not interested in slow HD's!

Could not get software needed for this product making it useless. seller could not or would not allow me the software needed.

Worked well for about 6 months then started throwing checksum errors.

I was really hoping I'd found an expansion card to rebuild my NAS but this card doesnt show up in Linux, can't see it in dmesg or PCI devices.Windows 10 and Server 2012 saw nothing, not even an unknown device, its a PCBrick.

Hade problem med portarna på moderkortet. Satte i detta i stället och plötsligt hade jag kanonbra hastighet. Rekommenderar detta!

Habe jetzt die 2te dieser Karten im Einsatz da bei der ersten nach wenigen Monaten ein Lüfterschaden auftrat.Bei der neuen Karte habe ich dann mal genauer auf die Verpackung geachtet und ein Lüfterschaden ist quasi vorprogrammiert, da die Karte so verpackt ist, dass alle Kabel auf dem Lüfter liegen und vermutlich durch den Transport schon beschädigt werden.Die Karten konnte leider nicht ausgetauscht werden, sondern musste neu bestellt werden!Ansonsten funktioniert die Karte so wie sie soll.

20 disques reliés en sata sur un PC domestique (carte MSI, i5 gen 6, debian), très satisfait.Seul bémol, les cables SATA fourni bien que fonctionnant correctement, sont un peu courts pour relier 20 disques proprement.

...bis zu einem Update von Windows Server 2016. Seit gestern wird der Controller nicht mehr vom System erkannt und für die HW-ID PCI\VEN_8086&DEV31D4&SUBSYS_312D41849&REV_06 sind keine Treiber auffindbar. Wo gibt es Treiber für die Komponente?Edit: Das Programm "Snappy Driver Installer" hat das Problem gelöst ;)