KeylessOption Keyless Entry Remote Control Car Key Fob for 2004-2009 Toyota Prius MOZB21TG (Pack of 2)

These worked with the procedures that were in a previous review I was able to program both of them with no issues here are the steps:1. Insert OLD fob into slot and remove it 4 times in a row, and insert it a fifth time but leave it in there!2. Open and close driver door 6 times.3. Remove OLD fob from slot. Car is in fob programming mode at this point.4. Insert NEW fob and leave in the slot for a full minute. Watch the blinking red anti-theft light on the dashboard. When the light stops flashing and goes dark, your new fob is all set.5. Remove the new fob and you're done. You should test both fobs to be sure they work properly.Now for the door lock functions.(Note: OLD is the old original key fob)1. Open the driver door with NO fob in slot and with the driver door unlocked and opened. Other doors can be locked or unlocked, it doesn't matter.2. Insert OLD fob into slot and remove it twice within 5 seconds.3. Close and open driver door twice.4. Insert and remove OLD fob once.5. Close and open driver door twice again.6. Insert OLD fob in slot and close door.7. Without pressing the brake, press power button, wait a second, press it again, wait a second, press it a third time to turn car back off.8. Remove OLD fob from slot. You'll be in "add mode" at this point.9. Car should lock and unlock doors TWICE to verify it is in add mode.(FOR step 10, you are now using the NEW FOB, you do not put it in the slot, just press the buttons on the NEW fob)10. Press both buttons on NEW fob simultaneously for a second and a half!.11 Within 3 seconds, press only the lock symbol button. yes it does matter which!12. Car should respond with one quick lock/unlock to verify that the new fob is all set. If the car responds with two lock/unlocks, that means it didn't work. I don't know how to troubleshoot that problem. Maybe just try again.13. To end this programming: Open a door or put fob in the slot.

This will work if you have the non SKS Key-Fob, the one with the black logo.When you get the keys, there will be a note that says: "Keys must be programmed by a locksmith or dealer"I'm guessing that KeylessOption adds the note just to "Cover their A##". Fear not, you will be able to program the keys yourself.I bought two key fobs, the first FOB did not program on my first attempt, I tried the second FOB and it programmed, then I re-tried the first FOB and it worked as well. After I got both FOBs working in the ignition, I was able to get them both to work for the doors, it took a couple attempts, but it did work.The whole process will take less than two minutes.Here were the instructions I used:1. Insert OLD fob into slot and remove it 4 times in a row, and insert it a fifth time but leave it in there!2. Open and close driver door 6 times.3. Remove OLD fob from slot. Car is in fob programming mode at this point.4. Insert NEW fob and leave in the slot for a full minute. Watch the blinking red anti-theft light on the dashboard. When the light stops flashing and goes dark, your new fob is all set.5. Remove the new fob and you're done. You should test both fobs to be sure they work properly.Now for the door lock functions.(Note: OLD is the old original key fob)1. Open the driver door with NO fob in slot and with the driver door unlocked and opened. Other doors can be locked or unlocked, it doesn't matter.2. Insert OLD fob into slot and remove it twice within 5 seconds.3. Close and open driver door twice.4. Insert and remove OLD fob once.5. Close and open driver door twice again.6. Insert OLD fob in slot and close door.7. Without pressing the brake, press power button, wait a second, press it again, wait a second, press it a third time to turn car back off.8. Remove OLD fob from slot. You'll be in "add mode" at this point. 9. Car should lock and unlock doors TWICE to verify it is in add mode.(FOR step 10, you are now using the NEW FOB, you do not put it in the slot, just press the buttons on the NEW fob)10. Press both buttons on NEW fob simultaneously for a second and a half!.11 Within 3 seconds, press only the lock symbol button. yes it does matter which!12. Car should respond with one quick lock/unlock to verify that the new fob is all set. If the car responds with two lock/unlocks, that means it didn't work. I don't know how to troubleshoot that problem. Maybe just try again.13. To end this programming: Open a door or put fob in the slot.14. Enjoy the savings from NOT buying a fob from the dealership!!!!!