🔧 Unleash Your Inner Fixer-Upper!
NEW ARRIVAL ⚡⚡⚡ Be91eiter change the traditional ideas and devoted to studying professional broken bolt extractor ✅ High-Speed Steel 4341 ✅ Suitable for general sizes and all kinds of broken bits ✅ Universal chuck that suitable for most electric hand drills ✅ Remove broken screw in one step(Do not need to conversion the extractor or adjust the chuck) How to Use the Screw Extractor? 1. The size of #6 - #10 needs to be installed in the socket adapter first, and then attach it to the extension bit holder (The other sizes can be attached to the extension bit holder directly) 2. Use the drill(Dr) bit to drill a hole in broken screws 3. Change to use the extract(Ex) bit with the same size 4. Reverse use the drill and take out the broken bit Warm Tips : - Must drill a hole first when the break screw surface is smooth. Otherwise the drill bit will slip - Must be vertical and low speed when drilling, reverse use this bit, drill the first hole deeper will easier to take out - It is best to use electric hand drill, can not be used the hammer drill mode! Must be low speed during use! Package Included: 20*Kelepopo damaged screw extractor(Ex#1 - #10, Dr#1 - #10) 1*Magnetic Extension Bit Holder 1*Socket Adapter Kelepopo - Your Professional Tool House We are committed to providing the best quality products, and largely dependent on product feedback from wonderful customers such as yourself. ✦✦✦If you have any questions or concerns about our product, please do not hesitate to contact us, we always here to service you
| Manufacturer | Kelepopo |
| Part Number | Kelepopo |
| Item Weight | 5.6 ounces |
| Package Dimensions | 7.36 x 3.58 x 1.57 inches |
| Country of Origin | China |
| Item model number | Kelepopo |
| Color | Silver |
| Item Package Quantity | 1 |
| Number Of Pieces | 22, 20 |
| Batteries Included? | No |
| Batteries Required? | No |
D**K
Amazing thank you
I broke the head off a screw on my bikes timing cover, I was so irritated and could not get it out of my head. This kit came over night and I simply used the smallest reverse drill, and did not even have to change over to extractor before the screw backed out. Amazing product that I’ve never used before and took less than 5 min to work perfectly. Worth every penny!!!! For those wondering, the machine screw I was taking out was a 8/32 and I had 5/8” thread locked in. These are for very small screws
B**R
Quick delivery and did the job
Performed the task I needed. Quick delivery. Happy with the purchase!
F**K
Cheap and Worthless
Terrible item. Does not work. In fact, the screws were made of harder metal than the extractor set, leaving the extractors stripped and damaged. Don't waste your money on this. Buy a real set of extractors.
A**R
They work
I had a number of M3 flat head screws liberaly slathered with thread locker and with Philips heads that no driver or bit would properly engage. I got three out by finding one off-spec Phillips bit that did engage with no slop, heads were ruined, was going to replace them all anyway. I found this set online with generally good reviews, came in today. I drilled all 4 remaining screws and three backed right out, the supplied drills worked fine, really soft hardware. First one didn't make it, drilled a little too deeply, tore the head right off. So that one gets drilled and maybe the thread remains picked out using dental tools, otherwise gets a tap run in. These are short screws, 4-6mm, and no hardware store extractor is going to work. Flush with the cover plates, no way to grab them with pliers or vise grips. Comes in a very nice locking plastic box, everything is labeled on the foam bit holder. Bits themselves have no markings. Needs some experimentation to see which bit combination works best. Tearing the head off the one screw didn't keep me from pulling the cover, other screw came right out. So I could make the needed adjustment. Couldn't have done it without this set. One star off for no size markings on the bits. But nothing broken, have always broken screw extractors when removing busted bolts.
F**3
Works !
Absolutely great. I was skeptical that it wouldn’t work due to something I over torqued. However, first try it pulled the screw out. For those curious, I fastened/stripped something at 35ft/lbs of torque in my vehicle to something that was supposed to be 10ft/lbs. First set I put in was able to back out the screw completely.
S**Z
Needs design improvement for better efficacy
Overall, it didn't work for me. I was drilling into a screw shaft after the head broke off. It was inside an old plastic electrical box screw hole.Pros: Nice packaging, very nice case to prevent these from getting lost or misplaced. Clear labeling inside the case.Cons: Unsure of the screw material I was drilling into, but it was stronger than the bits' material. As you can hopefully see in my second picture, it misshaped the drill threads instead of taking more material out of the screw. So I was unable to extract the screw and instead shaved the plastic around the screw and used vice grips once it was exposed. The instructions were also unclear and confusing. Mine actually did not come with the instructions I saw on someone's video of the product. I looked at the listing, and the bits were mislabeled, it wasn't clear which direction to use the drill. Then I searched how-to videos for other extractor sets and used the drill in reverse for both drilling and extraction. I then tried the drilling bit with the forward function of the drill, that didn't work very well either. The magnet for the extension bit holder is also very weak, which leads the bit to wobble while drilling and degrades the performance of the tool.
M**.
Ok
Ok
I**L
Steel quality is subpar.
Was struggling to drill the hole with the drill bit provided, and the extractor #10 broke off inside the hole when extracting in reverse...
Trustpilot
2 months ago
3 weeks ago
