AntecNX260 ATX Mid-Tower Case, Tempered Glass Side Panel, Full Side View, Pre-Installed 3 x 120mm ARGB in Front, Black

Build:MSI X570 w/ 5800X6900XT ReferenceCoolerMaster ML240 CPU AIO2x 8gb RAM - Corsair LPX1TB NVMEEVGA 850W GA PSUI was looking for a smaller, budget case for a higher end ATX build and this ended up being exactly what I needed. The NX260 is small and light, easy to move around. There seems to be just enough space wherever you need to work. The tightest space I had to work with was between the radiator and the CPU power plug on the motherboard, but even that the wasn't uncomfortably tight, just snug. Some of the case parts feel a little cheap, but...that's probably because they are. Lol.The thermals seem to be just fine. Under full load, GPU temp does not go above 80c core, 90c VRAM. CPU max temp gets up to 82c, but I don't blame the case airflow for that, probably could have opted for a better AIO. Either way, not bad for a cheaper case. I was planning on replacing the case fans if air flow was lacking, but haven't ended up needing to as of yet. The ARGB works great. The only light that is annoyingly bright is the case power LED but hey, you can just unplug that.So if you are looking for a simple, cheap, easy to work in, lightweight, smaller ATX case that doesn't sacrifice space for aesthetics, this is probably the case for you!

So far this case has been nothing but great! It has good airflow, and came with three pre-installed fans. I also ordered some extra fans and ended up having more than enough to cool my system. I really like the design and the way the front of the case looks. The tempered glass side panel looked fantastic as well.

Exactly what I was looking for; a small case that can fit a full size ATX motherboard. I wanted to show my young son how to build a PC and had my old Z68 board, i7 2600 and GTX 970 laying around in a box, so I needed an inexpensive case to build in. The three included fans seem to move a decent amount of air, and are fairly quiet. I do wish that you could control the RGB with software rather than the button on the top of the case, but not a deal breaker. This loses one star because it is so light it feels a bit cheap. However, the tempered glass side feels high quality and the case looks good overall. Easy to build in, and adding fans later after it was already built and running for a week was still easy. Overall it's a solid budget option.

I used this case to build a computer for a grandparent. The case is pretty well constructed and very easy to build in. It has ample cable management room and feels solid overall. I like the overall size as it not massive while fitting an ATX motherboard without any major problem. If you are going to install a graphics card, then please measure first before buying as it won't have as much room as a large case.The RGB lights on the fans can be turned off by holding the LED button if those bother you. Otherwise, you can press it to rotate between different color presets. The fans are all powered by a single SATA power connector instead of the motherboard fan headers which may confuse some builders during assembly.The default case fans are a little nosier than what I use on my personal builds; however, they are not too loud or give off any annoying hums or rattles. I believe most people would be very pleased with the noise levels. You may wish to add a rear case fan to further improve airflow performance. The fans included were all installed in the front of the case.It's hard to beat this value for the price if you are doing a lower budget build.

Not only did this case meet my expectations, their built in wire management and access holes were perfect. Also, the thing came with perfect paint...which is rare. Very much a nice case, highly recommend for a budget build...heck even for a gaming build. Supported my larger cooler with no problems, and supported my oversized PSU no issues.

Bigger than my old case that had its use also wanted to upgrade my motherboard so this was a must. Lots of space for your motherboard and cooling fans. Not bad for the price

It has good air flow and I think it looks decent. I accidentally cut the power button cord and Antec sent me one free of charge so I think that’s outstanding customer support. My only complaint is that there is room in the top of the case for 2 140 mm fans but not pre drilled holes for them and the mesh holes don’t line up you would have to drill holes for 140 mm fans in the top.

I bought this case for a budget gaming/school PC.Antec NX260 caseAresgame 750WGigabyte B560M DS3H V2 motherboardi5-11400f CPUZPG 16GB (8x2) DDR4 3200 RAMWestern Digital 1TB M.2 HDThe build was pretty easy and straight forward. Everything needed was included in the case (screws, zip ties, extra standoffs for the MB, etc.).Cable management was workable without issue. There are plenty of spots to feed and route cables. I don't have a lot going on in the case, so the cables weren't too hard to route.Quality seems pretty good. Nothing stands out as poor quality control.My only real complaint: the ARGB fans are not MB controlled. When I bought this case, I was thinking I would be able to use the FUSION software to control the front fans. NOPE! They are a strange proprietary set up with non-standard connectors. The only way to control them is with the top LED button.This is annoying because now the CPU fan and the extra fans I bought for the top, back, and bottom, do not sync or control the same. I could replace the front 3 fans, but that would be a bigger pain then it's worth to me.Just know this ahead of time if you buy this case, so you can replace them with standard ARGB fans before you build out the case.OVERALL: I might but it again. Or I might spend a little more and find a case with all the fans pre-installed, and not worry about it...?? NOT a deal breaker for sure. The case and included accessories make it a great value.Hope this helped!!

Volevo questo case da quando lo vidi recensito dal mitico Starsky , preso la settimana scorsa ma è arrivato acciaccato , subito sostituito con la solita celerità e cortesia del personale Amazon .Prime Impressioni :Wow è molto piccolo e compatto , sono abituato a case piu lunghi , ma è solo lo shock iniziale . Il vetro laterale è spesso e robusto , le lineee sono abbastanza eleganti ( è na tamarrata luminosa ma per me ha il suo sttile ) . In dotazione vi sono fascette ( sempre comode ) e molte vitine che servono ad avvitare le varie schede .Montaggio :Essendo gli spazi un pò risicati , bisogna ragionarci un pò prima di mettere dentro i vari componenti , col senno di poi , avrei montato i vari switc e usb prima di avvitare la scheda madre , perche una volta dentro la gabbia dell' alimentatore limita i movimenti delle dita . Comunque c è molto spazio , i vari raccordi per i fili sono molto larghi e ci passano i cavi che è un piacere . In circa un ora ho assemblato e fato partire il tutto ( Devo finire di sistemare i cavi per un motivo che vi spiego piu avanti ) .Conclusioni :Case con molti pregi , ma con un difetto molto antipatico ... Le luci sono si RGB ma si possono controllare solo da case , mancando i connettori AURA o similari , la ventola posteriore manca proprio . Quindi o ci si procura un adattatore o si cambiano le ventole , facendo comunque lievitare il prezzo finale di almeno 20 euro . A causa di ciò non ho finito di passare i cavi come volevo , cosa a cuoi ovvierò appena mi arrivano i pezzi non in dotazione .Buono , ma alla fine , non ti regalano niente .

Case semplice con tutto il necessario.Il materiale sembra scadente ma comunque è stabile e robusto.Il pannello in vetro anche se da un effetto fumè (non è proprio trasparente), è molto carino.Dispone di molte aperture su tutti i lati per un ottima gestione dell’aria.Le 3 ventole anteriori RGB sono silenziose e hanno il collegamento SATA oppure si possono collegare singolarmente sulla scheda.I colori pre impostati posso essere cambiati tramite un tasto sulla parte superiore del case.Per quanto riguarda il montaggio, non è stato difficile e rognoso come altri case da me montati.——Avrei preferito le corsie predisposte nel retro del case per passare i cavi e una porta type-c sulla parte superiore del case.Tutto sommato sono soddisfatto dell’acquisto.