Graco 287030 CleanShot Shut-off Valve

This was great for painting ceilings

If you are looking to get the best possible results from your airless sprayer, this is a must. This valve will virtually eliminate "spitting" from the gun. This valve requires the proper setup, matching the pressure of the sprayer to the shut-off pressure of the valve. Couple that with a good tip for the job, spraying is virtually flawless. This valve also gives you the ability to easily pivot (angle) the spray head. This valve is a little expensive, but it does come with a RAC X Base and a tip, so the value is pretty decent. It is made by Graco and has the same quality as you would expect. A few tips for those with less experience painting: -Use the right spray tip for what you spraying. -Match your gun filter to the spray tip. -Start at a lower pressure and work up slowly to eliminate spray "tails" (this will also extend the life of the tip) -Lower the shut-off pressure of this valve until it just barely activates when spraying -Clean off the tip occasionally while spraying with a rag

This part is a must have if you are a professional painter. This helps control your paint flow with a cleaner shot of paint. Its a bit pricey but worth it because the quality of this p[art will last a lot longer than he knock off parts and i like to keep all of my parts the same brand as my paint gun.

Works well. Very expensive! Was going with a cheaper clone but decided against it. Glad I did.

I think this is the best investment I’ve made in the past few days. I tested it with an old $30 gun I use for production—it turns any gun into a fine finish gun. The video speaks for itself.

After having the airless sprayer spit, I did some research and came across the Graco CleanShot. While it is expensive, it is worth it. I used this with the RACX FFLP 310 tip: https://www.amazon.com/dp/B06X3QYS2V?psc=1&ref=ppx_yo2ov_dt_b_product_details to spray some shaker cabinet doors I made. No spitting! Make sure the tip is securely fastened and test spray to confirm it is seated. The door and drawer faces turned out perfectly. I have an off brand airless sprayer and this tip fits any 7/8" spray head. I wish I would have found this sooner!

I was skeptical at first about this compressor. I have used many extensions spraying exterior and interior repaints and could never go without spitting. This compressor is a bit heavy on the end of the extensions but eliminates completely any spit from the gun. Leaving a clean fan just as if you were spraying with the gun alone. This little handy tool will save your back from leaning over to hit the bottoms of siding and also from ladder work. You can also spray more depending on the extension that your using. I use a 20 inch extension up to a 70 inch extension and this bad boy fits the bill. I usually do not write reviews but i have watched painters my whole life spray homes with just the gun and it takes a toll after awhile. This will save your back!!!! and your time$$$$ you clean it just as if you would clean a normal tip. The compressor will rotate in any way you would like the fan to go with ease. Hope this helps!

It turns out that it doesn't stop the flow of paint in time; paint always gets through, and in the end, there are excessive drips.

I usually don't write reviews even if 90% of the items i buy are great and i keep them , but this one had to be one of the best thing i bought. If you paint a lot and use extensions this will be mind bamboozeling for you , you will be able to start and stop where ever you want on the wall , ceiling or what ever you are painting and the swivel is just fantastic! The only downside is if you want to use FF LP tips , it wont work , the valve inside will not open and you will not be able to spray till you add a good amount of pressure . I still used the ff lp and it did a perfect job with higher pressure . 5 stars to this add on !

Excellent stuff if you know what it is then yes it does what it should excellent product

Expédié et Reçu très rapidement la livraison était chère pour un envoi standard les articles était bien emballé tout est d'origine le prix est très correct merci au vendeur

Aucune éclaboussures en plus on peut changer l’angle très pratique le seul inconvénient c’est que c’est un peu lourd

Product faulty when first used as spitting paint.