Description: The company's remote control receiver board is suitable for electrical control circuits such as anti-theft alarm, remote control electric door and window, signal control, industrial control, lifting equipment. Remote control switch module relay contact independent output, very suitable for direct control of various types of load; products use fixed code wireless coding technology, no directional, switch does not interfere with each other. 12V remote control switch, the power supply is recommended to use more than 500mA DC regulated power supply. Working mode: self-locking, interlocking, jogging. One control/multiple control can be realized. Device parameters: 1. Working voltage: DC12V 2. Standby current: 8MA 3. Working frequency: 315mhz 4. Encoding type: fixed code / learning code 5. Receive sensitivity: -95DBM 6. Output: 1 passive switch (jog/self-lock/interlock self-setting) 7. Load recommendation: 10A relay (remaining margin in use), it is recommended that resistive load <90w, inductive load <50w. Not suitable for frequent start and stop. 8. Output mode: contact output (controllable AC and DC) Add a remote learning method: Turn on the power indicator and flash it off. Press the (s1 white button) on the receiver board to release the button. At this time, the indicator light also flashes and turns off, then press the remote control button. The indicator flashes 4 times and goes out, learning is successful. The remote control can control the receiving board. Delete remote control method: Press the receiving board S1 (white button) and do not release it, the LED will light up, still do not release the S1 button. When the LED is off, the deletion is complete. Then release the button. Shipping list: 1 remote control（no battery） 1 2CH receiving module 1 protection box
| Manufacturer | abovehill |
| Item Weight | 2.39 ounces |
| Product Dimensions | 4.72 x 3.15 x 1.1 inches |
| Is Discontinued By Manufacturer | No |
| Style | Industrial |
| Thickness | 1.1 Inches |
| Batteries Included? | No |
| Batteries Required? | No |
F**R
Not sure If Working Properly
Real rookie when it comes to electronics. Not sure if the unit is not functioning properly or if it is a wiring problem on my part. More detailed instructions on how to wire a dc motor (for example) would be helpful.
D**N
Wireless 12V motor control with 2 channels for forward and reverse movement
The remote does not come with batteries and requires a 23A 12V battery.Reset module by pressing and holding white button for ~8 seconds.To program both channels: press the white button on the module, release, immediately on the remote press “A”, release, indicator light will appear and then immediately press “B”.The module comes preset with momentary mode enabled; this can be changed with the jumper (1 2 3) next to the white button.
H**E
Perfect for my setup
Work great
S**O
Waste my time
It comes with an empty battery of the controller and a broken antenna of the receiver.
D**T
Great remote c control
Simple, easy to set up and use remote control.
Trustpilot
2 days ago
3 weeks ago