MORryde213.3008 UO12-021 Heavy Duty Shackle Upgrade Kit, Stock/Equaflex 3-1/8" Shackles - Tandem Axle

J’ai remplacé le kit original sur sa ma roulotte (sellette de 40’ Winnebago 2015). Le kit de Morryde est de qualité supérieure et fabriqué avec des matériaux beaucoup plus robuste! Finalement, le système de boulons et écrous peuvent être graissés!

When I received the kit I was not sure if it was authentic due to the markings on the black bolts. I contacted Morryde to confirm and after discussing my concerns I was sent out 4 bolts with #5 markings on them. I installed the kit myself and an X factor brace. I’m happy with the products and the installation.

Great product

Friend used it and said worked great

They came on time and all. Everything was the correct length and all that. All four of the pre pressed shackles the bolts were aimed outward a good 1/8th inch. Made it impossible to get the other side of the shackle on. Luckily I had a table vice I used to squeeze them closer together so they would fit inside the other side of the shackle. The groves on the bolts that keep it from spinning are a little too long in my opinion. I would say to make them shorter that way it's easier to get the bolt through the other side of the hole. Since the way they are now at least in my situation the groves hit the first side of the hanger before going through the hole ok the other side so you have to lift the spring/axle while either holding a socket to the bolt and hitting it with a hammer or taking off the grease fitting and hitting it. 3 of the bolts aren't taking grease which I honestly should have checked prior to installing. I'm not sure if it's the fitting or the bolt itself. I'll have to buy a couple of grease fittings to see what it does. But the concept and everything is heavy duty I just wish they had fitted everything prior to packaging it to make sure everything went on smoothly and everything worked correctly with each other. The rating isn't based on everything said in this review but only based on the fitment of the shackles on each other which I shouldn't have had to worry about, and the couple of bolts that weren't getting grease. I installed these on a 14 foot utility trailer.